Proto tcp-client vs proto tcp (OpenVPN: Client Export Utility)
I upgraded an old pfSense 1.2.3 installation a to 2.0 RC3 yesterday. I decided to dump my old configuration file and setup everything from scratch to in order to have a look at all the new features.
I run a OpenVPN server on port 443 using TCP and after upgrading to 2.0 I noticed that the VPN connection kept going down about twice a minute with a connection reset in the client log but nothing in the server log.
After lots of fiddling I narrowed it down to the fact that the OpenVPN: Client Export Utility sets the protocol in the client configuration to "proto tcp-client" if the OpenVPN server it set to TCP. If i change the protocol manually in the client configuration to "proto tcp" everything works fine and the connection is rock stable.
I looked up the proto parameter for the client configuration on the OpenVPN website to find out what difference is between using "proto tcp-client" versus "proto tcp".
The OpenVPN 2.2 manual doesn't even mention the "proto tcp" option:
Use protocol p for communicating with remote host. p can be udp, tcp-client, or tcp-server.
The client configuration examples on the other hand only use the "proto udp" and "proto tcp" options:
Are we connecting to a TCP or
UDP server? Use the same setting as
on the server.
I'm not sure if I should file a bug regarding the OpenVPN: Client Export Utility for this issue or not due to the lack on information regarding the arguments for the proto option.
It's however clear in my case that using "proto tcp-client" does not work properly while "proto tcp" does.
Anyone else out there using OpenVPN over TCP that could test this?
PS. It should also be mentioned that the client I'm using to test this is a Windows 7 x64 machine using OpenVPN 2.2.
cmb last edited by
tcp-client is correct and works fine. 'proto tcp' isn't even a valid argument per the 2.2 man page.
maybe you're running an old version of OpenVPN?
I'm using the following OpenVPN version:
OpenVPN 2.2.0 Win32-MSVC++ [SSL] [LZO2] built on Apr 26 2011
Originally developed by James Yonan
Copyright (C) 2002-2010 OpenVPN Technologies, Inc. firstname.lastname@example.org_all.py
Compile time defines: ENABLE_HTTP_PROXY=1, ENABLE_DEBUG=1, ENABLE_MANAGEMENT=1,
ENABLE_CLIENT_SERVER=1, ENABLE_PASSWORD_SAVE=1, ENABLE_CLIENT_ONLY=0, ENABLE_SO
Found a discussion about this very subject here: