Wrong config with tap/bridge device and openvpn in RC3

[slu]

I think there is a bug with the tap config in pfsense RC3.
If I setup the tap device I don't need a "Tunnel Network" and this option in the openvpn config is wrong:
"server 10.0.8.0 255.255.255.0"

Right is:
server-bridge <gateway of="" bridge="" interface="" lan=""><netmask><pool-start><pool-end>For example:
Interface LAN 192.168.0.1/24
DHCP Server LAN range: 192.168.0.2 - 192.168.0.100

OpenVPN Server config:
server-bridge 192.168.0.1 255.255.255.0 192.168.0.101 192.168.0.150

http://openvpn.net/index.php/open-source/documentation/miscellaneous/76-ethernet-bridging.html</pool-end></pool-start></netmask></gateway>

[namezero111111]

server-bridge only expands into server and another two options.
In fact, for bridging site to site, server is the right option.
Server-bridge only makes sense for bridging clients and giving them IPs.

[slu]

Server-bridge only makes sense for bridging clients and giving them IPs.

That is what I want, get a IP address of the LAN with my openvpn connection.