[SOLVED] 27th june snap issues
-
below is what u get during boot on the serial console on the embedded image on alix
/etc/rc: /usr/sbin/clog: not found /etc/rc: /usr/sbin/clog: not found /etc/rc: /usr/sbin/clog: not found /etc/rc: /usr/sbin/clog: not found /etc/rc: /usr/sbin/clog: not found /etc/rc: /usr/sbin/clog: not found /etc/rc: /usr/sbin/clog: not found /etc/rc: /usr/sbin/clog: not found /etc/rc: /usr/sbin/clog: not found /etc/rc: /usr/sbin/clog: not found /etc/rc: /usr/sbin/clog: not found /etc/rc: /usr/sbin/clog: not found chmod: /var/log/*.log: No such file or directory ..done. PHP Warning: PHP Startup: Unable to load dynamic library '/usr/local/lib/php/20 060613/zmq.so' - Shared object "libzmq.so.0" not found, required by "zmq.so" in Unknown on line 0 External config loader 1.0 is now starting... ad0s3 Launching the init system... done. Initializing............................ done. Starting device manager (devd)...done. Loading configuration......done. Updating configuration...done. Cleaning backup cache........done. Setting up extended sysctls...done. Setting timezone...done. Starting Secure Shell Services...done. Setting up polling defaults...done. Setting up interfaces microcode...done. Configuring LAGG interfaces...done. Configuring VLAN interfaces...done. Configuring QinQ interfaces...done. Configuring WAN interface...startvr1: link state changed to UP ing pppoe0 link...done. Configuring LAN interface...vr0: link state changed to UP ng0: changing name to 'pppoe0' done. Configuring OPT1 interface...wlan0: changing name to 'ath0_wlan0' done. vr0: promiscuous mode enabled ath0_wlan0: promiscuous mode enabled Syncing OpenVPN settings...done. Starting syslog...Jun 28 12:54:47 syslogd: /var/log/ntpd.log: No such file or d irectory Jun 28 12:54:47 syslogd: /var/log/ppp.log: No such file or directory Jun 28 12:54:47 syslogd: /var/log/pptps.log: No such file or directory Jun 28 12:54:47 syslogd: /var/log/poes.log: No such file or directory Jun 28 12:54:47 syslogd: /var/log/l2tps.log: No such file or directory Jun 28 12:54:47 syslogd: /var/log/ipsec.log: No such file or directory Jun 28 12:54:47 syslogd: /var/log/openvpn.log: No such file or directory Jun 28 12:54:47 syslogd: /var/log/apinger.log: No such file or directory Jun 28 12:54:47 syslogd: /var/log/relayd.log: No such file or directory Jun 28 12:54:47 syslogd: /var/log/filter.log: No such file or directory Jun 28 12:54:47 syslogd: /var/log/vpn.log: No such file or directory Jun 28 12:54:47 syslogd: /var/log/portalauth.log: No such file or directory Jun 28 12:54:47 syslogd: /var/log/dhcpd.log: No such file or directory Jun 28 12:54:47 syslogd: /var/log/system.log: No such file or directory Jun 28 12:54:47 syslogd: /var/log/system.log: No such file or directory Jun 28 12:54:47 syslogd: /var/log/system.log: No such file or directory Jun 28 12:54:47 syslogd: /var/log/system.log: No such file or directory Jun 28 12:54:47 syslogd: /var/log/system.log: No such file or directory done. Configuring firewall....load_dn_sched dn_sched FIFO loaded load_dn_sched dn_sched QFQ loaded load_dn_sched dn_sched RR loaded load_dn_sched dn_sched WF2Q+ loaded load_dn_sched dn_sched PRIO loaded ..done. Starting PFLOG...done. Setting up gateway monitors...done. Synchronizing user settings...done. Starting webConfigurator...done. Configuring CRON...done. Starting OpenNTP time client...done. Starting DHCP service...done. Starting DNS forwarder...done. Configuring firewall......done. Generating RRD graphs...done. Starting UPnP service... done. Starting CRON... done. Bootup complete FreeBSD/i386 (firewall.pfsense) (console) *** Welcome to pfSense 2.0-RC3-nanobsd (i386) on firewall *** -
Thanks. I just fixed.
-
The next new snapshot should be ok.
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.