RC-3 openvpn bridge

  • Hello,

    sorry for my poor english, I hope you understand me.

    I runing pfsense 2.0 RC1 as an openvpn bridge (add manually the ovpnc interface to the bridge). After the upgrade to RC3, pfsense create a gateway for openvpn interface with ip and write "kernel: arpresolve: can't allocate llinfo for" into system.log. How can I disable the creation of this gateway?

    kind regards,

  • I put a fix on this, please test next snapshot.

  • fix work, thanks


  • hi,

    system log is full with:
    "kernel: arpresolve: can't allocate llinfo for"

    My current Version:
    2.0-RC3 (i386)
    built on Thu Aug 18 19:17:45 EDT 2011

  • You are sure that you are on the latest snapshot and the warning is from openvpn?
    Can you show me a screenshot of the System->Routing screen?
    Also a ls /tmp/*_router?

  • okay today, I've not make an update .. so dashboard show update

    [2.0-RC3][admin@vpn01]/root(1): ls /tmp/*_router

    [2.0-RC3][admin@vpn01]/root(2): cat /tmp/ovpnc1_router

    ovpnc1 is interface for openvpn?

    I know is was fix before but after latest update is comes again …


  • Even the openvpn config please.

  • hope config is better than a screeshot …

    [2.0-RC3][root@vpn01]/root(1): cat /var/etc/openvpn/client1.conf
    dev ovpnc1
    dev-type tap
    dev-node /dev/tap1
    writepid /var/run/openvpn_client1.pid
    #user nobody
    #group nobody
    script-security 3
    keepalive 10 60
    proto udp
    cipher AES-128-CBC
    up /usr/local/sbin/ovpn-linkup
    down /usr/local/sbin/ovpn-linkdown
    engine cryptodev
    lport 1194
    management /var/etc/openvpn/client1.sock unix
    remote vpngw 1194
    ca /var/etc/openvpn/client1.ca
    cert /var/etc/openvpn/client1.cert
    key /var/etc/openvpn/client1.key
    resolv-retry infinite

    I muste create the bridge manual after every restart, with

    ifconfig bridge0 addm ovpnc1

    Nobody will fix it for me :(

    you need more, tell me. only remote access is not possible ::)

Log in to reply