Nat e Ip Alias



  • I believe this is a bug
    PfSense doing this automatically Nat inter all IpAlias of a interface

    In my setup I have

    rl0=WAN
    rl1=IP1
    rl2=IP2 + IpAlias(IP2:1,IP2:2,IP2:3,IP2:4)

    traffic e NAT

    IP1 -> WAN    Nat Ok
    IP2 -> WAN    Nat ok
    IP2:x->WAN    Nat Ok

    IP2 -> IP1 without NAT Ok

    IP2:x -> IP2 without NAT Ok

    IP2:x -> IP2:x  Nat should not do, but doing this

    Rules Lan
    –-------

    • IP1 * * * * none

    • IP2 * * * * none

    • ALIAS-IP2x * * * * none

    Nat outBound

    WAN   IP1/24 * * 500 * * YES  Auto created rule for ISAKMP - LAN to WAN

    WAN   10.10.1.0 * * * * *   NO Auto created rule for LAN to WAN
    WAN   Alias ALL * * * * *


Log in to reply