Squidguard Web Filter Issues

dvserg

It is possible to see a screenshot of the settings of your proxy squid ? (pfsense - proxy's first page)

coachs88

Certainly!

proxy1.png_thumb

coachs88

Here's the second part.

proxy2(1).png_thumb

Nachtfalke

You have to check "Allow users on interface" so that the clients on you LAN interface are able to use the proxy.

Further you have checked "transparent proxy". This is okay. In this case you do not have to enter any proxy setting in your clients browser.

coachs88

Okay. So now I have users allowed to interface and it is partially working.. but it is blocking all websites again, for all users. Not just the limited workstations.

I followed all previous directions and thought this would get everything. I can tell it's going in the right direction so I must have proxy filter sat up wrong somehow.. also, is there anythiing I need to do in the access control tab?

If I attach more screen shots would you be able to tell me what I'm doing wrong?

Nachtfalke

You could post screens of Target categories, group acl and common acl.

But I think, if all users get blocked, you have to go to "Common ACL" and check "allow" there for any target rules.

coachs88

Here you go. Hope these help.

proxy3.png_thumb

coachs88

Group ACL

proxy4.png_thumb

coachs88

Target categories

proxy5.png_thumb

Nachtfalke

Hi,

in "Common ACL" and "Group ACL" it would be necessary to see what is in "Target Rules List (click here)"

Further in "Groups ACL": Why did you enter every single IP in Client (source) ? Why didn't you just enter a hole subnet 192.168..40.0/24 ?

"Target Categories"…...you haven't entered anything there. This makes no sense. Either you enter the sites you want to ALLOW or you enter the sites you want to block.

What do you want to realize ?
What should the hosts you entered in "Group ACL" shoul do ?
Do you just want to block same sites like porn or something else or do you want that everything of the internet is blocked except some sites ?

coachs88

Sorry.. that was a bad screen shot. I do have stuff entered in the target categories. here is a better one.

There is only 1 subnet at my company. I entered individual clients as a way to separate restricted workstations from admin workstations.

What I want to happen is this: restricted workstations have EVERYTHING blocked except a few websites which are needed to do their job. Everything else must be blocked. I.e personal email, facebook, youtube, porn, etc etc. Which is why I want it all blocked by default for those certain workstations. Does that make sense? I hope this screenshot clears up some confusion.

proxy6.png_thumb

Nachtfalke

okay.

I think there is a mistake in the "Expressions" block.
Expressions are - that's the way I understand it - if an URL contains a word of this. For example if the expression is:

.porn.

This means every URL with the word "porn" in front, at the end or somewhere in the middle is blocked:
www.XYZporn.com
www.pornXYZ.com
www.ABCpornXYZ.com

You have to put your IPs and URLs in the block "Domain list".
The text above explains it. Just enter there:


google.com 12.23.34.45 12.12.34.34 34.34.34.34 example.com amazon.com

PS: If you are using IPs, you must be sure, that you didn't check the box "Do not allow IP addresses in URLs".
It is better to use domain names in the "domain list" so the IP behind this domain can change and you do not need to change this from time to time in SquidGuard. If it is not possible to use domain names, then remember the checkbox with "Do not allow IP addresses in URLs"

To your question if this make sense:
Yes it does. I am doing this the same way.

coachs88

Sorry for the delayed reply.. haven't been into work for a few days, have been terribly sick with mono.

Anyway, I tried your suggestion of instead of having expressions, having all the domains I want to whitelist instead. Now instead of them all getting blocked on all workstations, it isn't blocking anything at all!

Should I post screen shots again? I really don't understand what I'm missing at this point.

Nachtfalke

Sure, you can post again all tabs of SquidGuard.

But you want to realize the same as I am doing and I posted all necessary options in my screenshots. Perhaps you are missing one little checkbox ;-)

Further, after changing anything in SquidGuard, are you applying "Save" and after this "Apply" on the first tab of SquidGuard ? This is neccessary for a working proxy filter!

coachs88

Okay. Here are the updated screenshots. I hope you can help.

Filter is working perfectly on limited workstations but it isn't allowing all access to admin workstations.

prxy1.png_thumb

coachs88

Another

prxy2.png_thumb

coachs88

coachs88

coachs88

Last one

prxy5.png_thumb

Nachtfalke

Hi,

proxy3.png:

uncheck "Do not allow IP addresses bypass"
defaulf access: allow and NOT deny.
This page is for the admin workstations, like you call it ;)
All that you deny on this page is a restriction for you admin workstation.

proxy4.png:
Is ok, but here you can check:
"Do not allow IP addresses bypass" BUT ONLY if you dot not have any IP addresses in proxy5.png

Head up - you got it :-)