How to: Get CPU temp

seh2000

Hi,

I use as per previous posts coretemp on a D510 CPU.

I done the below change to get the degree symbol.
°;C"; ?>" />
However, for after the first update to the Dashboard (think the update happens each 10 sec.) the degree symbol disappears. Only to come back if/when dashboard is reloaded. Anyone else seen this?

I still try to get all four core temp to be shown in the Dashbaord, but no success anyone here got this to work when using coretemp?

Steen

stephenw10

Yes I'm seeing that too. Hard to see why it's happening from the code. :-\

Steve

seh2000

@stephenw10:

Yes I'm seeing that too. Hard to see why it's happening from the code. :-\

Steve

Hi Steve - thanks as then I know I did not do something wrong! ;D
Steen

Cino

@jimp:

I wouldn't average them, if one core is running hot you'd probably want to know.

true…. you would think they would be around the same temp since they are in the same package but i dont know much about the dual/quad core processors.

seh2000

@Cino:

I'm not a programmer but a couple of months ago we had a topic about about supermicro boards with ipmi builts.. http://forum.pfsense.org/index.php/topic,34056.30.html Anyways, I copied the diag_system_activity.php page and change some of the code to display ipmi-sensors. I just did the same with coretemp. Its not on the dashboard but you can access it via the web interface.

Remove the .txt and upload it to /usr/local/www and you can access it via http://pfsense/diag_coretemp.php

To add it to the Diagnostics tab, add this to your config.xml:
 <installedpackages>[...]
		

<menu>
			<name>Core Temps</name>
			<tooltiptext>Core Temperatures</tooltiptext>
			Diagnostics
			<url>/diag_coretemp.php</url>
		</menu>

		[...]</installedpackages> 

Hi Cino,
Just followed your great writeup and it worked!
As attached screenshot shows.
Thanks!
Steen

![pfSense Diag Coretemp sh.jpg](/public/imported_attachments/1/pfSense Diag Coretemp sh.jpg)
![pfSense Diag Coretemp sh.jpg_thumb](/public/imported_attachments/1/pfSense Diag Coretemp sh.jpg_thumb)

Cino

@seh2000 good to hear!! i give all the credit to Scott Ullrich for making the original page.. I just changed some of the code for our needs :-)

seh2000

@stephenw10:

Yes I'm seeing that too. Hard to see why it's happening from the code. :-\

Steve

Steve,
I am not a programmer, but if I replace the "C" with another symbol or take the "C" away then at the next update it is replaced with a "C" I believe this is from the command sysctl dev.cpu.0.temperature as the return is nn.nC so the degree symbol and the C added to the system_information.widget.php is overwritten, but this is only seen when other symbol in front or after the "C" is added or another letter e.g. "K". If the "C" is ommitted the it is not see when the dashboard is loaded, but appears at the 1st update.
Steen

ariyako

just in case you got HTTP ERROR 403 while wget from ptt.4mg.com/pfSense

then try this links

if you are on i386
http://www.ariyako.org/pfsense/coretemp32.zip

if you are on AMD64
http://www.ariyako.org/pfsense/coretemp64.zip

jimp

Even better:
http://files.pfsense.org/jimp/tempmon/

ariyako

@jimp:

Even better:
http://files.pfsense.org/jimp/tempmon/

WIN ;D :D

stephenw10

@seh2000:

I am not a programmer, but if I replace the "C" with another symbol or take the "C" away then at the next update it is replaced with a "C" I believe this is from the command sysctl dev.cpu.0.temperature as the return is nn.nC so the degree symbol and the C added to the system_information.widget.php is overwritten

It exhibits the same behaviour for me and I'm using mbmon to get the temperature which returns only the temperature, nn.n.

Steve

Metu69salemi

Waiting to someone package this or make a widget.

seh2000

It exhibits the same behaviour for me and I'm using mbmon to get the temperature which returns only the temperature, nn.n.

Steve

Hi Steve,
Tried to get mbmon to work on my box, but cannot as I would have liked to have the fan RPMs, but core temp will do for now and at least now we know why the ' ° ' goes away (overwritten).
Cheers Steen

stephenw10

The coretemp sensor is far more accurate. I would use that if my hardware supported it.
I was pointing out that the ° symbol disappears even though mbmon does not return a 'C' character.
I would guess it's being snipped by some other part of the script.

Steve

seh2000

@stephenw10:

The coretemp sensor is far more accurate. I would use that if my hardware supported it.
I was pointing out that the ° symbol disappears even though mbmon does not return a 'C' character.
I would guess it's being snipped by some other part of the script.

Steve

Tx for the feedback I will keep using coretemp.
When I replaced the 'C' with Q, 6, z then each time at the first updated they were replaced with the 'C', but why under mbmon in mbmon does not return a 'C' character - no idea.
Maybe one could strip the 'C' by only allow NN.n in the field and have ° C hardcoded somehow. Well at least I can see the temp right now from one care this been a wish for a long time! Thanks to all here for making that happen!
Cheers Steen

stephenw10

Speculating….
There are two functions. One that draws the table and all the static data and fills in the dynamic data, system_information.widget.php. Another function updates the dynamic data and it's that function that needs updating to include a °.
...End speculation.

Steve

Edit: Yes. In /usr/local/www/javascript/index/ajax.js
Add a ° to the updateTemp function like this:

function updateTemp(x) {
if($("tempmeter")) {
$("tempmeter").value = x + '°C';
$("tempwidtha").style.width = x + 'px';
$("tempwidthb").style.width = (100 - x) + 'px';
}

seh2000

@stephenw10:

Speculating….
There are two functions. One that draws the table and all the static data and fills in the dynamic data, system_information.widget.php. Another function updates the dynamic data and it's that function that needs updating to include a °.
...End speculation.

Steve

Edit: Yes. In /usr/local/www/javascript/index/ajax.js
Add a ° to the updateTemp function like this:

function updateTemp(x) {
if($("tempmeter")) {
$("tempmeter").value = x + '°C';
$("tempwidtha").style.width = x + 'px';
$("tempwidthb").style.width = (100 - x) + 'px';
}

YIHUUUUUU! ;D :D :)
Steve you are the man!
Works like a dream now.
Now I will try to work on getting all four cores to be displayed.
Cheers Steen

CNLiberal

@stephenw10:

Speculating….
There are two functions. One that draws the table and all the static data and fills in the dynamic data, system_information.widget.php. Another function updates the dynamic data and it's that function that needs updating to include a °.
...End speculation.

Steve

Edit: Yes. In /usr/local/www/javascript/index/ajax.js
Add a ° to the updateTemp function like this:

function updateTemp(x) {
if($("tempmeter")) {
$("tempmeter").value = x + '°C';
$("tempwidtha").style.width = x + 'px';
$("tempwidthb").style.width = (100 - x) + 'px';
}

When I make the above change, I get this:

Â°C

That's after the page refreshes. This is the code I'm putting in:


function updateTemp(x) {
	if($("tempmeter")) {
		$("tempmeter").value = x + '°C';
		$("tempwidtha").style.width = x + 'px';
		$("tempwidthb").style.width = (100 - x) + 'px';
	}
}

I tried, instead, adding the #176; or whatever the ASCII code was, and it just showed me the ASCII code. What did I do wrong? Thanks!

Jim

seh2000

I just fund the ° symbol in my word processor symbol library then copied it to:

/usr/local/www/javascript/index/ajax.js

function updateTemp(x) {
if($("tempmeter")) {
$("tempmeter").value = x + '°C';
$("tempwidtha").style.width = x + 'px';
$("tempwidthb").style.width = (100 - x) + 'px';

/usr/local/www/widgets/widgets/system_information.widget.php

Core 1 Temperature

![](./themes/<?= $g[)/images/misc/bar_left.gif" height="15" width="4" border="0" align="middle" alt="left bar" />![](./themes/<?= $g[)/images/misc/bar_blue.gif" height="15" name="tempwidtha" id="tempwidtha" width="" border="0" align="middle" alt="red bar" />![](./themes/<?= $g[)/images/misc/bar_gray.gif" height="15" name="tempwidthb" id="tempwidthb" width="" border="0" align="middle" alt="gray bar" />![](./themes/<?= $g[)/images/misc/bar_right.gif" height="15" width="5" border="0" align="middle" alt="right bar" />

Used first the ASCI code, but then the symbol, also I seen some places this around " and other ' around - I use ' hope this helps.
The reason for Core1 instead of CPU is I play with having all four cores displayed.

Steen

CNLiberal

Nope, it's still doing the same thing for me. I guess I'll have to wait until someone develops a system package. Not a big deal. I'm just curious why it's not showing a temperature, even though I can query through a sysctl statement and get 4 temperatures (with HyperThreading, two temperatures really). Thanks all! I'll still keep an eye on this thread.

jim