Dual wan + dual lan problem
-
Hello,
i have 1 box pfsense with 4 gigabit ports in this configuration:
ISP1–> WAN1(public ip)-->LAN1(public subnet)--> 5 servers with public ip
ISP1--> WAN2(public ip)-->LAN2(public subnet)--> 5 servers with public ip
deleted all NAT rules and give access on ports from wan to lan
no any other load balance or failover
-if i ping with ICMP any server does not respond if i put in rule gateway for that connection(give me ttl lost in transit or timed out)(with default gateway is responding)
-on traceroute from outside in LAN2 ip it is working but the last ip its WAN1(like a loop between connections)
-if i set on firewall to accept on WAN2 any ICMP and i set gateaway from WAN2 it is looping again with WAN2 gateway foreveri hope you understand with my english :) thanks
-
You have to use 1:1 NAT for your servers from what i understand on your description.