Postfix - antispam and relay package

marcelloc

You can set your internal mail servers on ACLs -> Client Access List, but I don't know if postscreen('zombie blocker') or rbl checks can validade internal mail servers.

You can check other postfix antispam features with 'strong header verification' and ACLs for filter header,MIME and body settings.

For a deep internal mail server antispam search you may need mailscanner.
I'm working on this package now and will be available soon.

best regards,
Marcello Coutinho

mauricioniñoavella

how to do my main.cf configuracuion if I have it in centos bit too high I want to pass this pfSense this is my main.cf I want to enable in pfsnese

thanks for the collaboration

General settings

bounce_queue_lifetime = 6h
mailbox_size_limit = 51200000
message_size_limit = 10240000
luser_relay =
recipient_delimiter = +
message_strip_characters = \0

Authentication with SASL

broken_sasl_auth_clients = yes
smtpd_sasl_auth_enable = yes
smtpd_sasl_security_options = noanonymous
smtpd_sasl_local_domain = $mydomain

Encryption with TLS

smtpd_tls_auth_only = yes

smtpd_use_tls = yes
smtpd_tls_cert_file = /etc/postfix/cert.pem
smtpd_tls_key_file = /etc/postfix/key.pem
smtpd_tls_loglevel = 1

Mail restrictions (note: Kolab policies are not implemented)

smtpd_recipient_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_unauth_destination
kolabpolicy_time_limit = 3600
kolabpolicy_max_idle = 20

Mail routing

mailbox_transport = mailpostfilter
content_filter = mailprefilter
transport_maps = hash:/etc/postfix/transport

Outbound SMTP authentication

smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd
smtp_sasl_auth_enable = yes
smtp_sasl_security_options =
unknown_local_recipient_reject_code = 550
smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache
smtp_tls_security_level = may
smtp_sasl_type = cyrus
relayhost = [xxxx.com]:587

marcelloc

You can put your options on custom main.cf options at gui.

This package was designed to be a relay server only, I do not recomend enabling mailboxes on it.

mauricioniñoavella

I just want it to pass and I get this

postfix/smtpd[50880]: NOQUEUE: reject: RCPT from unknown[192.168.200.xxx]: 554 5.7.1 mauricio.nino@xxx.com.co: Relay access denied; from= root@localhost.localdomainto= mauricio.nino@xxx.com.coproto=ESMTP helo=<localhost.localdomain></localhost.localdomain>/mauricio.nino@xxx.com.co /root@localhost.localdomain /mauricio.nino@xxx.com.co

marcelloc

Include your 192.168.200.xxx internal ip in ACL/fiter map.

mauricioniñoavella

marcelloc

appreciate your help but I do not work I have this in the log

The truth can not be done now, I only serve as a relay,

Oct 11 16:49:45 postfix/smtpd[29361]: generic_checks: name=check_client_access
Oct 11 16:49:45 postfix/smtpd[29361]: check_namadr_access: name unknown addr 192.168.200.14
Oct 11 16:49:45 postfix/smtpd[29361]: check_domain_access: unknown
Oct 11 16:49:45 postfix/smtpd[29361]: dict_cidr_lookup: /usr/local/etc/postfix/cal_cidr: unknown
Oct 11 16:49:45 postfix/smtpd[29361]: check_addr_access: 192.168.200.14
Oct 11 16:49:45 postfix/smtpd[29361]: dict_cidr_lookup: /usr/local/etc/postfix/cal_cidr: 192.168.200.14
Oct 11 16:49:45 postfix/smtpd[29361]: generic_checks: name=check_client_access status=0
Oct 11 16:49:45 postfix/smtpd[29361]: generic_checks: name=permit
Oct 11 16:49:45 postfix/smtpd[29361]: generic_checks: name=permit status=1
Oct 11 16:49:45 postfix/smtpd[29361]: >>> START Helo command RESTRICTIONS <<<
Oct 11 16:49:45 postfix/smtpd[29361]: generic_checks: name=reject_unknown_helo_hostname
Oct 11 16:49:45 postfix/smtpd[29361]: reject_unknown_hostname: localhost.localdomain
Oct 11 16:49:45 postfix/smtpd[29361]: lookup localhost.localdomain type A flags 0
Oct 11 16:49:45 postfix/smtpd[29361]: dns_query: localhost.localdomain (A): OK
Oct 11 16:49:45 postfix/smtpd[29361]: dns_get_answer: type A for localhost.localdomain
Oct 11 16:49:45 postfix/smtpd[29361]: generic_checks: name=reject_unknown_helo_hostname status=0
Oct 11 16:49:45 postfix/smtpd[29361]: >>> END Helo command RESTRICTIONS <<<
Oct 11 16:49:45 postfix/smtpd[29361]: >>> START Sender address RESTRICTIONS <<<
Oct 11 16:49:45 postfix/smtpd[29361]: generic_checks: name=reject_unknown_sender_domain
Oct 11 16:49:45 postfix/smtpd[29361]: reject_unknown_address: root@localhost.localdomain
Oct 11 16:49:45 postfix/smtpd[29361]: ctable_locate: move existing entry key root@localhost.localdomain
Oct 11 16:49:45 postfix/smtpd[29361]: reject_unknown_mailhost: localhost.localdomain
Oct 11 16:49:45 postfix/smtpd[29361]: lookup localhost.localdomain type MX flags 0
Oct 11 16:49:45 postfix/smtpd[29361]: dns_query: localhost.localdomain (MX): Host not found
Oct 11 16:49:45 postfix/smtpd[29361]: lookup localhost.localdomain type A flags 0
Oct 11 16:49:45 postfix/smtpd[29361]: dns_query: localhost.localdomain (A): OK
Oct 11 16:49:45 postfix/smtpd[29361]: dns_get_answer: type A for localhost.localdomain
Oct 11 16:49:45 postfix/smtpd[29361]: generic_checks: name=reject_unknown_sender_domain status=0
Oct 11 16:49:45 postfix/smtpd[29361]: generic_checks: name=permit
Oct 11 16:49:45 postfix/smtpd[29361]: generic_checks: name=permit status=1
Oct 11 16:49:45 postfix/smtpd[29361]: >>> START Recipient address RESTRICTIONS <<<
Oct 11 16:49:45 postfix/smtpd[29361]: generic_checks: name=reject_unauth_destination
Oct 11 16:49:45 postfix/smtpd[29361]: reject_unauth_destination: mauricio.nino@xxxx.com.co
Oct 11 16:49:45 postfix/smtpd[29361]: permit_auth_destination: mauricio.nino@xxxx.com.co
Oct 11 16:49:45 postfix/smtpd[29361]: ctable_locate: move existing entry key mauricio.nino@xxxx.com.co
Oct 11 16:49:45 postfix/smtpd[29361]: NOQUEUE: reject: RCPT from unknown[192.168.200.14]: 554 5.7.1 mauricio.nino@itac.com.co: Relay access denied; from= root@localhost.localdomainto= mauricio.nino@xxx.com.coproto=ESMTP helo=<localhost.localdomain></localhost.localdomain>/mauricio.nino@xxx.com.co /root@localhost.localdomain /mauricio.nino@itac.com.co
Oct 11 16:49:45 postfix/smtpd[29361]: generic_checks: name=reject_unauth_destination status=2
Oct 11 16:49:45 postfix/smtpd[29361]: > unknown[192.168.200.14]: 554 5.7.1 mauricio.nino@xxxx.com.co: Relay access denied
Oct 11 16:49:45 postfix/smtpd[29361]: watchdog_pat: 0x800e115f0
Oct 11 16:49:45 postfix/smtpd[29361]: < unknown[192.168.200.14]: DATA
Oct 11 16:49:45 postfix/smtpd[29361]: > unknown[192.168.200.14]: 554 5.5.1 Error: no valid recipients
Oct 11 16:49:45 postfix/smtpd[29361]: watchdog_pat: 0x800e115f0
Oct 11 16:49:45 postfix/smtpd[29361]: < unknown[192.168.200.14]: RSET
Oct 11 16:49:45 postfix/smtpd[29361]: > unknown[192.168.200.14]: 250 2.0.0 Ok
Oct 11 16:49:45 postfix/smtpd[29361]: watchdog_pat: 0x800e115f0
Oct 11 16:49:45 postfix/smtpd[29361]: < unknown[192.168.200.14]: QUIT
Oct 11 16:49:45 postfix/smtpd[29361]: > unknown[192.168.200.14]: 221 2.0.0 Bye
Oct 11 16:49:45 postfix/smtpd[29361]: match_hostname: unknown ~? 192.168.200.0/23
Oct 11 16:49:45 postfix/smtpd[29361]: match_hostaddr: 192.168.200.14 ~? 192.168.200.0/23
Oct 11 16:49:45 postfix/smtpd[29361]: disconnect from unknown[192.168.200.14]

![postfix relay.png_thumb](/public/imported_attachments/1/postfix relay.png_thumb)
![postfix relay.png](/public/imported_attachments/1/postfix relay.png)/mauricio.nino@xxxx.com.co

jedblack

marcelloc,

Thanks for all the hard work!

I have one question…

can i use the postfix forwarder to forward my mail to GMAIL server... i'm doing this now with a centos/postfix install... below is the pertinent config file entries..

SASL authentication

smtp_tls_security_level=encrypt
smtp_sasl_auth_enable = yes
smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd
smtp_sasl_security_options = noanonymous
relayhost = [smtp.gmail.com]:587
transport_maps = hash:/etc/postfix/transport

TLS

smtp_tls_CAfile = /etc/postfix/cacert.pem
smtp_tls_cert_file = /etc/postfix/certs/git01.pem
smtp_tls_key_file = /etc/postfix/certs/git01.key
smtp_tls_session_cache_database = btree:/var/run/smtp_tls_session_cache
smtp_use_tls = yes
smtpd_tls_CAfile = /etc/postfix/cacert.pem
smtpd_tls_cert_file = /etc/postfix/certs/git01.pem
smtpd_tls_key_file = /etc/postfix/certs/git01.key
smtpd_tls_received_header = yes
smtpd_tls_session_cache_database = btree:/var/run/smtpd_tls_session_cache
smtpd_use_tls = yes
smtp_tls_loglevel = 1
tls_random_source = dev:/dev/urandom
smtp_cname_overrides_servername = no
#debug_peer_list=smtp.gmail.com
#debug_peer_level=3

marcelloc

Did you tried to include your config in custom main.cf options and of course transfer your files to pfsense?

I'm not sure if other options will affect you setup but could work.

marcelloc

@mauricioniñoavella:

marcelloc
Oct 11 16:49:45 postfix/smtpd[29361]: dns_query: localhost.localdomain (MX): Host not found
Oct 11 16:49:45 postfix/smtpd[29361]: dns_query: localhost.localdomain (A): OK
Oct 11 16:49:45 postfix/smtpd[29361]: dns_get_answer: type A for localhost.localdomain
Oct 11 16:49:45 postfix/smtpd[29361]: NOQUEUE: reject: RCPT from unknown[192.168.200.14]: 554 5.7.1 mauricio.nino@itac.com.co: Relay access denied; from= root@localhost.localdomainto= mauricio.nino@itac.com.coproto=ESMTP helo=<localhost.localdomain></localhost.localdomain>/mauricio.nino@itac.com.co /root@localhost.localdomain /mauricio.nino@itac.com.co
Oct 11 16:49:45 postfix/smtpd[29361]: generic_checks: name=reject_unauth_destination status=2
Oct 11 16:49:45 postfix/smtpd[29361]: > unknown[192.168.200.14]: 554 5.5.1 Error: no valid recipients

mauricioniñoavella,

see what postfix is rejecting and correct it.
It looks like you tried to send a email with an invalid sender.
If you need this sender, create this domain in dns server that pfsense uses.

att,
Marcello Coutinho

mauricioniñoavella

marcelloc

greeting
I tried to do everything

Current issue if tusabes Nose to issue

generates this error since I only use smtp_sasl

mailserver postfix/smtpd[20836]: warning: smtpd_sasl_auth_enable is true, but SASL support is not compiled in
mailserver postfix/smtpd[20836]: connect from unknown[xxxx.xxxx.xxxx.xxx]
mailserver postfix/smtpd[20836]: disconnect from unknown[xxxx.xxxx.xxxx.xxx]

I hit it in the

custom main.cf options

smtp_sasl_auth_enable = yes
smtp_sasl_password_maps = hash:/usr/local/etc/postfix/sasl_passwd
smtpd_recipient_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_unauth_destination
relayhost = [smtp.xxx.com]:587

thanks for your collaboration

marcelloc

Seems that many people need SASL auth, I will put in postfix forwarder TODO list.

mauricioniñoavella

Too bad I could bother you confirm if it works as a relay Services: Postfix relay and antispam (postfix forwarder) and also worked with
STARTTLS

thanks for your collaboration

darklogic

Hello,

I must say I am glad to see this package. Mail proxies and mail forwarders with filtering is a must have these days. I am new to this package and was wondering if there is any documentation on how to configure and set it up for use. Some of the setting are unclear to me.

I am not sure what the binding setting is for the WAN, LAN, and loopback and can't find anything that explains it better or what basic settings should be set to. Also, when I removed my SMTP port forward form NAT and rules to use this package, I am having trouble recieving mails. I went to mxtoolbox.com and did a diagnostics test and I don't get a header response or anything. It just says host times out from inactivity.

I really did not change any of the default setting from the install and yes I did add the domain with a forwarding internal address.

Could someone help or post a basic setup that would get this working. It is a little hard to figure settings with no documentation or explinations of settings.

Thanks,

MDP

marcelloc

at docs.pfsense.com has some info but not so detailed.

the basic setup is:

remove nat from port 25
create a wan rule to permit smtp traffic to wan address
check enable postfix option
choose at least wan loopback interfaces
fill your domain/internal smtp info

Many options has recommend, default and link option to postfix documentation.

I recommend enable all antispam settings too.

att,
Marcello Coutinho

darklogic

Hey thanks very much for the info. I will give a try. I really like the concept of this package and have waited a while to see something like this come out for pfsense, so thanks for all your hard work.

I do have one question for your response. When you say WAN loopback interface, do you mean select the WAN interface only, the loopback interface only, or both?

Thanks Again,

darklogic

So I have e-mails forwarding ok now and thanks for the basic info for that. Just curious, as I seen in early to mid last month a post you made about mailscanner, and was wondering if this will become part of the base install of the postfix forwarder package?

Currently I am unsure how to implement this ability and not really sure on what the ACLs/Filter maps tab does.

If you made this package an all inclusive install with all the components needed for a full SMTP filter, that would be sweet.

Thanks

marcelloc

Mailscanner + spamassassin will be released soon as a new package with more then 500 options to filter spam. As I told in other posts, I'm waiting Mailscanner package compilation by core team. But if you know how mailscanner works you can add freebsd package and configure it.

Can you feedback in % how postfix + all antispam settings reduced spam messages on mailboxes?

darklogic

Yeah, I will post some stats in a about a week. I will compare report files from our other filtering system and see what a rough % in reduction maybe. I can say that I have noticed a difference already just from last night when I enabled it. I am seeing a lot of RBLS blocks and invalide host address blocks. Normally this would get cought by our other filter, but not always for some reason.

For the most part, it seems to be working very well and I am excited for the Mailscanner package.

I have been playing around with the ACLs/Filter Maps section and was wondering if a manual blacklist block and whitelist allow will be added?

Thanks,

marcelloc

The ACLs allow you to block or permit ips, subjects, atachments and Also filter message body.

Take a look at samples below each field.

darklogic

Ahhh yes, I am starting to understand how you are laying this out. This all makes sense now. I guess I have just been getting to use to check boxes and enable buttons way to much LOL.

Thanks again for the info.

Take Care

MDP