Postfix - antispam and relay package

hcoin

Could someone give a link or otherwise explain "the PBI disaster" as it relates to pfsense (mentioned upstream)?

The glowing PR of PBI explains that it's 'fully automatic' – except for the custom pre-remove and post-install scripts that are, as it explains, 'sometimes necessary'. So, 'mostly fully automatic' would have been better.

doktornotor

The thing is utterly broken. It produces whacky hardlinks to non-existent libraries because it seems to pick up dead symlinks instead (tons of packages after 2.2 was released), it is unable to find the libraries it itself ships with the package (recently sudo with 2.2.1 upgrade), and in general is just a nightmare for packaging. BSD does not exactly excel in the package managers department, but I have never seen such broken packaging format like PBI. Self-contain my ass. In general "works" like the DLL hell on Windows.

marcelloc

The only workaround I found for this is

install package from pfsense gui
go to console, remove pbi packages(not the gui)
Install postfix package via pkg ng

The main postfix binary works fine but all other sub process it starts die with missing libs.

I don't know if writing a guide to use pkg ng will help or add a lot of extra problems.

chris4916

@BBcan177:

I agree that package support is not always the greatest, but you also have to understand that Developers of these packages do it on their own free time and usually without any monetary gain. There are just a handful of Developers that I see maintaining packages at this time.

This is crystal clear and I fully share your comment.
I'm not blaming anyone and especially not those trying to develop packages and making it available to the community :-[
However it has tons of negative side effect with potential users not understanding that "package" is not "pfSense", especially, and this is my main point, because communication from pfSense or from NetGate or even from gurus here doesn't state this clearly enough, from my own standpoint ;)

mwp821

@bensons:


# cd /usr/local/lib
# ln -s /usr/pbi/postfix-amd64/local/lib/libspf2.so.2

Also:


ln -s /usr/pbi/postfix-amd64/local/lib/libsasl2.so.3
ln -s /usr/pbi/postfix-amd64/local/lib/libpcre.so.3

mwp821

I have been going a little nuts trying to get a simple mail relay (smart host) up and running for my local subnet, which is just about the easiest thing to do in Postfix. I was getting stuck on error messages such as "no mechanism available" and "No worthy mechs found" trying to authenticate against my ISP's relay.

In addition to linking libspf2, libpcre, and libsasl2 from /usr/pbi/postfix-amd64/local/lib, you also need to link the mechanism libraries found in /usr/pbi/postfix-amd64/local/lib/sasl2. If I knew more about FreeBSD, I would suggest updating ld.so.conf with these paths or setting a LD_LIBRARY_PATH in the environment instead of creating symlinks all over the filesystem. Alternatively, you can just install the required libraries directly from FreeBSD, which is what I did, with the following command:


pkg install libspf2 pcre cyrus-sasl

Restart Postfix Forwarder in the webConfigurator and you should be good to go. I've been using System > Advanced > Notifications > Test SMTP to test it. Make sure to set your email server to localhost, port to 25, From (e.g. admin@yourhost.example.com), Notification (e.g. your personal email address), and leave everything else blank/default.

Here's my "custom main.cf options" (for the time being, I'm going to try to lock it down and enable TLS now that I've got it working):


relayhost = [smtp.comcast.net]:587
smtp_sasl_auth_enable = yes
smtp_sasl_security_options = 
smtp_sasl_password_maps = hash:/usr/local/etc/postfix/sasl_passwd

UPDATE: TLS was pretty easy to turn on (following the pfSense documentation) after solving the above issues. Here's my final config:


relayhost = [smtp.comcast.net]:587
smtp_sasl_auth_enable = yes
smtp_sasl_security_options = noanonymous, noplaintext
smtp_sasl_tls_security_options = noanonymous
smtp_sasl_password_maps = hash:/usr/local/etc/postfix/sasl_passwd
smtp_tls_security_level = secure
smtp_tls_CAfile = /etc/ssl/cert.pem
smtp_tls_loglevel = 1


Apr 11 20:15:06 cerberus postfix/smtp[13917]: Verified TLS connection established to smtp.comcast.net[68.87.20.6]:587: TLSv1.2 with cipher DHE-RSA-AES256-SHA (256/256 bits)

See the screenshots for the rest of my "smart host" configuration. The most important part is to set it to "Listen on" loopback and your LAN interface(s), and to set MyNetworks in Access Lists to the loopback subnet and your local subnet(s). I also dumbed down the antispam settings but I'm not sure if is necessary; SMTP clients in MyNetworks might not be subject to antispam rules.

UPDATE 2: The update from 2.2.1 to 2.2.2 blew away my sasl_passwd file (I uninstalled all my packages before the update and reinstalled everything afterwards), but that was easy enough to regenerate. I moved it to /etc/postfix to prevent it from happening in the future. Everything else seems to still work fine (except for the known sqlite2/3 issue).

![Notifications screenshot.png](/public/imported_attachments/1/Notifications screenshot.png)
![Notifications screenshot.png_thumb](/public/imported_attachments/1/Notifications screenshot.png_thumb)
![Access Lists screenshot.png](/public/imported_attachments/1/Access Lists screenshot.png)
![Access Lists screenshot.png_thumb](/public/imported_attachments/1/Access Lists screenshot.png_thumb)
![Postfix Antispam screenshot.png](/public/imported_attachments/1/Postfix Antispam screenshot.png)
![Postfix Antispam screenshot.png_thumb](/public/imported_attachments/1/Postfix Antispam screenshot.png_thumb)

MadCatZA

Hello. Am I understanding correctly, this package is not working?

yarick123

MadCatZA,

from my experience with the package, it works only on pfSense Version 2.1.5 or older. As far as I remember, the author has written in this forum about it.

Regards
yarick123

MadCatZA

@yarick123:

MadCatZA,

from my experience with the package, it works only on pfSense Version 2.1.5 or older. As far as I remember, the author has written in this forum about it.

Regards
yarick123

Appreciated, I have setup a 2.1.5 box and indeed it is working as compared to 2.2.2 which is not without manual modifications. What a shame :(

azekiel

any change to update to postfix 2.11 without waiting for pfsense 2.3?
I want to implement dnssec and dane…

//edit: mah... openssl 0.9.8 is a bummer, too.

MadCatZA

Any news on a fix for this?

Bismarck

The author of this package said, maybe it will fixed in pfSense version 2.3 with pkgng.

https://redmine.pfsense.org/projects/pfsense/roadmap#2.3

So don't hold you breath, it can take some time…

azekiel

it's pretty easy to get it running with the current version without the sqlite/db thing… just search through the forum.

SisterOfMercy

Uhhh, if this package is broken, why is it still listed in pfSense 2.2?

My pfSense shows this:
Postfix Forwarder Release 2.4.2
platform: 2.2 2.2.999

Or is this some automatic thing, with the 2.2.999 meaning it has not been officially tested?

marcelloc

@marcelloc:

The only workaround I found for this is

install package from pfsense gui

go to console, remove pbi packages(not the gui)

Install postfix package via pkg ng

The main postfix binary works fine but all other sub process it starts die with missing libs.

I don't know if writing a guide to use pkg ng will help or add a lot of extra problems.

The main problem with this(and many others) package is that pbi messes up bin and lib location. I have the gui fixed for sqlite2 /sqlite3 but for now, just removing pbi and installing postfix pkg will keep postfix working on 2.2
If I push the gui fix for 2.2 on github, it will broke package gui on 2.1

marcelloc

To get postfix working on pfSense 2.2, follow these steps:

Remember, do it at your own risk ;)


fetch -o /usr/local/www/postfix.php http://e-sac.siteseguro.ws/px22/postfix.txt
fetch -o /usr/local/www/widgets/widgets/postfix.widget.php http://e-sac.siteseguro.ws/px22/postfix.widget.txt
pbi_delete postfix-2.11.3_2-amd64
rm -rf /usr/pbi/bin/libexec/postfix
rm -rf /usr/local/etc/postfix
rm -rf /var/spool/postfix
rm -rf /var/mail/postfix
rm -rf /var/db/postfix
pkg install postfix libspf2

fix postfix.inc file with this patch via system patcher package

add this patch via package system patcher

**description:**postfix_inc
patch:

--- postfix.orig.inc 2015-08-18 08:15:00.000000000 +0000
+++ postfix.inc  2015-08-18 08:18:10.000000000 +0000
@@ -36,11 +36,11 @@
 require_once("globals.inc");

 $pfs_version = substr(trim(file_get_contents("/etc/version")),0,3);
-if ($pfs_version == "2.1" || $pfs_version == "2.2") {
-       define('POSTFIX_LOCALBASE', '/usr/pbi/postfix-' . php_uname("m"));
-} else {
+//if ($pfs_version == "2.1" || $pfs_version == "2.2") {
+//     define('POSTFIX_LOCALBASE', '/usr/pbi/postfix-' . php_uname("m"));
+//} else {
        define('POSTFIX_LOCALBASE','/usr/local');
-}
+//}

 $uname=posix_uname();
 if ($uname['machine']=='amd64')

directory:/usr/local/pkg/

machadomall

Hello,
What is the stable version of pfSense where Postfix Forwarder works perfectly?

I'm tryna the pfSense 2.2.4-RELEASE (amd64) with Postfix 2.4.2 Forwarder, but not this cool not.

Hugs.

azekiel

look at the post above yours…

machadomall

Hello,
I saw it, I do not want is to have to do this!
What version of pfsense and postfix stable so I do not have to do what Marcello recommend?
Grateful.

azekiel

2.1

but you can savely do that.