{Complete} Timebased Rules

sullrich · Mar 28, 2007, 12:41 AM

#3 fixed now. Thanks!

#1 and #2 are being fixed as I type this.

sullrich · Mar 28, 2007, 12:42 AM

Since I can't get the rules to load with a schedule associated with it, I can't test this so I'll ask it here…

If a client on the LAN is using Squid in either normal or transparent mode, will they be able to surf the internet even if I have a rule in place to block them? (This was an issue in ClarkConnect at one time when using the Squid proxy bypassed firewall block rules)

Good question. You'll have to test and let us know :)

BuddhaChu · Mar 28, 2007, 12:55 AM

Suggestion: If the rules are limited to only 5 minute ranges allowed (00, 15, 30, 45, & 59), wouldn't a drop box be better then a text input box? This would eliminate input errors. Same for the hour section.

I don't know if that fits into the pfSense "style" or not.

sullrich · Mar 28, 2007, 1:00 AM

@BuddhaChu:

Suggestion: If the rules are limited to only 5 minute ranges allowed (00, 15, 30, 45, & 59), wouldn't a drop box be better then a text input box? This would eliminate input errors. Same for the hour section.

I don't know if that fits into the pfSense "style" or not.

Yes, very good idea. We'll look into it.

BuddhaChu · Mar 28, 2007, 2:38 AM

After looking at the code in firewall_schedule_edit.php there looks to be a typo on line 581 ("td.innerHTML=" twice @ beginning of the line)

td.innerHTML=td.innerHTML="

BuddhaChu · Mar 28, 2007, 3:30 AM

I'm full of suggestions tonight…

If you get rid of both the hour and minute text boxes and replaced them with one drop down box you could eliminate both the checkKeyEntry() and checkTimeLimits() Javascript functions. Yes, the drop box would have 97 entries, but I think it would be worth it.

The way that's done in ClarkConnect is to build the < option value ="00:15" >00:15< /option > entries with two loops.

Pseudo code (I haven't coded in PHP since early 2003)

Hour loop - loop from 0 to 23
Minute loop - loop from 0 to 45
If hour= 0 then
Add a zero to the hour in the < option > entry (i.e. "00") $hour . "0:" . $minute
Elseif minute = 0
Add a zero to the minute in the < option > entry (i.e. "00") $hour . ":0" . $minute
Else
Output hour:minute to < option > entry
End if
Return minute loop
Return hour loop
Add < option > for 23:59

I hope I'm helping, not hindering when making these suggestions.

BuddhaChu · Mar 28, 2007, 3:54 AM

Reloaded with the 3-27 snapshot (built after issue #3 above was fixed). Something happened and now the Schedule column is missing for the two rules that are added with a checkbox (Block private & bogon networks).

sullrich · Mar 28, 2007, 3:58 AM

@BuddhaChu:

Reloaded with the 3-27 snapshot (built after issue #3 above was fixed). Something happened and now the Schedule column is missing for the two rules that are added with a checkbox (Block private & bogon networks).

That should be fixed. Please try most recent snapshot.

BuddhaChu · Mar 28, 2007, 4:45 AM

Reloaded with the 3-27 snap with a timestamp of 2007-Mar-27 23:23:10 and the issue is still there.

The whole < td >< /td > section is missing for the Schedule column. See attached pic for the HTML code relating to that page.

sullrich · Mar 28, 2007, 4:57 AM

Not sure if the snapshot server is broken, but the latest sources show me:

yoda715 · Mar 28, 2007, 6:08 AM

@BuddhaChu:

Reloaded with the 3-27 snapshot (built after issue #3 above was fixed). Something happened and now the Schedule column is missing for the two rules that are added with a checkbox (Block private & bogon networks).

I've duplicated this. Will fix shortly.

heiko · Mar 28, 2007, 6:56 AM

Good Morning,
i will test it in a few hours. Thanks
Greetings from Germany
heiko

yoda715 · Mar 28, 2007, 7:31 AM

@BuddhaChu:

Reloaded with the 3-27 snap with a timestamp of 2007-Mar-27 23:23:10 and the issue is still there.

The whole < td >< /td > section is missing for the Schedule column. See attached pic for the HTML code relating to that page.

Fixed now.

Christian · Mar 28, 2007, 8:59 AM

Hi,

this looks like a really niceaddition, thanks to all involved (the programmers as well as the person paying the bill).

I'm not sure how to test this, but do you have any ideas what will happen if a rule is scheduled for a time that doesn't exist?
I'm refering to daylight saving time.
What happens if something should be disabled at 2:30am every Sunday night, but there is no 2:30 on one Sunday a year?
Also the other way, if a rule is only active between 2am and 2:30am on Sundays, will it be active twice when the extra hour is added?

As I'm not paying for it, so I'm not asking for a special way to handle this, all I would like to know is what is the intendet way daylight saving will be handled?

Thanks for a cool addition to a cool firewall product,

Christian

BuddhaChu · Mar 28, 2007, 10:15 AM

Confirmed the missing schedule column is fixed.

sdale: Nice fix for not hitting the "Add Time" button on the schedule page. Even though I'm familiar with the interface now, I forgot to hit the Add Time button and the msgbox dialog helped me out.

heiko · Mar 28, 2007, 12:45 PM

Hello,
very special thanks BuddhaChu for testing it and very very special thanks to "Scott´s" for coding…great

Issue #1 #2 from BuddhaChu is open
when i choose multiple days, for example 10 days of month, i think, a line break is missing (Screenshot)
for me it would be nice, when the date/time picker starts with Monday at the left.... :)
Problem: a couple days brings "grimbelfixe" to the description, when you edit and save a second time
Problem: when you stay in the schedule maks and have more than one configured range, and you want to edit one, click this and click a second also without saving the first one, uups, then the logic is a little bit confused the a first range disappeared.

I think, you should only one range to edit at the same time. A second edit is not allowed, before the first one are not saved.

A litte bit more in a 1 or 2 hours, also a posting to the rule features.
Greetings
heiko

![multiple_configured _ranges.jpg](/public/imported_attachments/1/multiple_configured _ranges.jpg)
![multiple_configured _ranges.jpg_thumb](/public/imported_attachments/1/multiple_configured _ranges.jpg_thumb)

Perry · Mar 28, 2007, 1:22 PM

In April and July i can't select the dates 1-7, bug?

![can't select.gif](/public/imported_attachments/1/can't select.gif)
![can't select.gif_thumb](/public/imported_attachments/1/can't select.gif_thumb)

heiko · Mar 28, 2007, 1:37 PM

I have the same behaviour

heiko · Mar 28, 2007, 2:00 PM

Hello,

1.) What is with time overlaps in the configured ranges?

2.) I have created a passing rule "icmp allowed to WAN" from the schedule 15:30- 15:45. The Rule is created on 15:20 Uhr. At this time no schedule is set on the rule. The Ping is OK. Now, i disabled the Rule (green arrow), nothing happens… Then I kill the states and all works fine.

At 15:25 i change the rule, enabled and a schedule with one configured range from 15:30 to 15:45. Save and all runs fine. At 15:30 +-/ one minute, the schedule runs active, but whe the time is over, nothings happens.

I edit and save the rule without changes, so now time is really over and the ping is dead.....

Greetings
heiko

heiko · Mar 28, 2007, 2:45 PM

Ups, i am barred from my testmachine. To many schedules on the ruleset with no activity…..
It is possible to expansion the "console setup" with anything as "delete all schedules from rules"....
Greetings
heiko