HOW To setup the Rule that Make Faiolover Available

[wasim081]

I have configured the Load Balnce( wan + opt1 which work fine) and Failover (wan over opt1 and opt1 over wan)

I have the Latest SnapShot according to This document

http://doc.pfsense.org/index.php/Multi-Wan/Load-Balancing

NOW LoaDBalance is Working Fine

Now i want laodBalance all the traffice and when a link is down all the traffic go through other link and when both links is up the traffice goes through load Balancer

My Rules are
          –----------------------------------------------------------------
        Proto --- source --- port --- destination --- port --- Gateway
        -------------------------------------------------------------------
1      any        Lansubnet  any            any        any    any                    (Default Rule)

2      any        Lansubnet  any            any        any    LoadBalancer pool

Now HOW To setup the Rule that Make  Faiolover Available

[jeroen234]

remove the first rule
the loadbalange and failover will work

[wasim081]

What you Say about These Rules

–----------------------------------------------------------------------------------------
        Proto --- source --- port --- destination --- port --- Gateway

1    any        Lansubnet  any            any        any    LoadBalancer pool

2    any        Lansubnet  any            Wan        any    FailoverPool For Wan

3    any        Lansubnet  any            Opt1        any    FailoverPool For Opt1

4    any        Lansubnet  any            any        any    any          (Default Rule)

Please explain for my calarity  :-*
Best Regards  :-* :-* :-*

[jeroen234]

remove rule 4

and test by removing the kable of the wan interface
then plug back in
and remove the one from the opt1 interface