VLAN question



  • Hello!
    Here is my configuration
    pfsense with two interfaces
    rl0 - WAN (rl0 connected to Ethernet from ICP using static adress)

    VLAN10 - at rl1 (10.0.2.1)
    VLAN1 - at rl1 (10.0.1.1)

    rl1 connected to switch (trunk port with "allow" rules for vlan10 and vlan1)

    i have Cisco aironet AP connected to switch (trunk port with "allow" rules for vlan10 and vlan1)  with SSID to VLAN:
    guests vlan10
    office vlan1

    Firewall configured allow any to any, and proxy in transparent mode.

    When i am try connect to 'guests' network i can see what DHCP adress is received, but i cant see any hosts on the network, only myself.

    Thanks.



  • why to use vlan1?

    what you expected to see?



  • @Metu69salemi:

    why to use vlan1?

    what you expected to see?

    all the network now is using native vlan1, i thought i dont need to change this, is't it?
    i thought i will add just vlan10 to use with guest AP's.



  • @Metu69salemi:

    why to use vlan1?

    what you expected to see?

    oh maybe you don't know abut SSID to VLAN function in Cisco's equipment? Now all my APs configured for VLAN1 and i'll add virtual SSID to each AP, configured with VLAN10. Office woking via VLAN1, guests via VLAN10.



  • Well i may know something about cisco aironets, i did my bachelor thesis based on those and have worked little over year with those devices.
    just today i configured 9 pieces 1242ag's.

    So what you wanted to see


Locked