FTP not working with Load Balancer ?

hoba

followed the tip in the Load-Balancing-How-To to set up a "workaround" rule with 127.0.0.1 1-65535 through my default gateway but nothing changed.

This workaround works fine sending all ftp-traffic to the main WAN. Make sure your rule is on top of all other rules and you use "default" and not WAN as gateway.

sullrich

You can disable the ftp helper and port forward 21 + the data range and it should work fine. If you have a ftp server that allows the controlling of the data port range, only allow 1000 ports or so to keep the port range small.

hessie

Thanks the workaround works now, I had it at the last position at the firewall rules which was wrong. I moved it to the top and now everything works as expected.

Thanks !

sullrich

No problem. Glad you got it working.

tunge2

Where do i add the ftp rule? I added the rule below, but that rule doesn't work?

Proto Source Port Destination Port Gateway Description

TCP/UDP LAN net 20 - 21 * 20 - 21 * FTP

hoba

If you search you'll find the workaround mentioned endless times here at the forum. However, the rule should look like:
Firewall>rules, Lantab, very top:
pass, protocol any, source any, destination 127.0.0.1, gateway default

This is the most easy rule to fix anything that runs on the pfSense itself with loadbalancing/multiwan, not only ftp but natreflection, packages, …

tunge2

Thanks, now it works!! Is it possible to add this information to the load balancing document? I did not understand the original line in the most recent version of the load balancing document….

hoba

I edited the section: http://doc.pfsense.org/index.php/Multi-Wan/Load-Balancing#FTP.2FNAT-Reflection_Workaround

Hope this will prevent further confusion.

tunge2

thnx :) i hope that question never comes back again…...

leimrod

It might also be worth noting that pfSense needs to be restarted after implementing this rule for it to fully take affect. At least this was the case with my experience of trying to get FTP working

hoba

@leimrod:

It might also be worth noting that pfSense needs to be restarted after implementing this rule for it to fully take affect. At least this was the case with my experience of trying to get FTP working

Should usually not be needed. I guess it's a state problem if you tried it just before setting up the rule. In that case a diagnostics>states,reset states should fix it.