Pfsense Nokıa IP380 Install
-
Hi,
So I have tested the last config posted by pierre.
It's also working on my box and I get this results:# vmstat -i interrupt total rate irq0: clk 16552 99 irq4: uart0 414 3 irq7: 16 0 stray irq7 16 0 irq10: fxp1 dc0 dc1 2158 13 irq11: ubsec0 fxp0* 16507 99 irq14: ata0 2765 16 Total 38588 232All interface are responding but unfortunatly the web interface on the lan is not.
All interface are responding but unfortunately the web interface on the lan is not.
Another strange point is why the irq are not used as configured in the loader.conf.local?
For example, only fxp1 have to be on the irq10 and from the vmstat info we have still 3 active nics on this irq.Wallabybob> I confirm that I have not the same version of the firewall as pierre, I have an older one. I have also the same as pierre but this one is not booting anymore, but I can confirm that the motherboard is not 100% the same.
Alex
-
Guys,
Need help here please !!!. At the moment i have done the following:
- I have the live iso for pfsense 2.0
- Have the new kernel files
- removed disc from ip380 and mounted onto virtuabox running on windows XP
I opened the iso with poweriso and added the files that i downloaded ( Thanx Alex) but it wont load the kernel.
Am i going about this in the wrong way ?
How did you get to install ?
am i right in the way i change the ISO ?
should I be using another install file other than the live iso ?
should i be installing in another way than virtuabox ?Please help :)
-
I don't know how is build the live iso.
For my firewall I have made a full installation of pfsense using a laptop (selecting console version without VGA output)After that I started the pfsense install on my laptop to replace the kernel with the new one for IP380.
At this point you have only to remove the disk from the laptop and put it into the Nokia box … that’s all!Alex
-
Hi
Guys,
Need help here please !!!. At the moment i have done the following:
- I have the live iso for pfsense 2.0
- Have the new kernel files
- removed disc from ip380 and mounted onto virtuabox running on windows XP
I opened the iso with poweriso and added the files that i downloaded ( Thanx Alex) but it wont load the kernel.
Am i going about this in the wrong way ?
How did you get to install ?
am i right in the way i change the ISO ?
should I be using another install file other than the live iso ?
should i be installing in another way than virtuabox ?Please help :)
Where did you "add" the new files? You have to rename the directory /boot/kernel to something different, v.gr. /boot/kernel.orig, and then, you can copy the contents of Alex deepst directory in his zip archive (files kernel.gz and *.ko) to /boot/kernel
Good luck.
Pierre
-
Thanks for the reply , so if i have it right i do a normal install on the laptop to usb, then when its done i rename the directory on the hard drive and put the files on ?
-
Cool , working pfsense 2 on ip380.. ;D ;D ;D ;D ;D ;D ;D.
I installed xp on the laptop ( had to after i made the mistake of booting pfsense cd and choosing quick install, it wiped my laptop drive ..but anyway)
Then i added oracle viruabox and warftp on laptop.
Plugged the nokia hard drive into a usb adapter and mounted the raw disk to a virtuabox disk.
Booted virtual machine with pfsense 2.0 live cd and completed the quick install , chose console & no vga with keyboard. Selected exit and stopped the reboot.
Mounted the hard drive ….
give ip address to virtuabox ethernet with /sbin/ifconfig
start warftp and share new kernel dir on xp...
ftp to laptop & transfer new kernel files into /boot/kernel on viruabox
reboot,
install disk in nokia ip380 & connect console.
Working like a charm !!!!!