Multiple package install failures on fresh 2.0 install
-
**Hello all,
I have a fresh install of 2.0RELEASE_AMD64 on ESXi
I'm trying to install…
SquidGuard
lightsquid
openvpn client export wizard.the GUI output is this(message is the same for all three packages)..**
–----------------------------------------------
Beginning package installation for OpenVPN Client Export Utility...
Downloading package configuration file... done.
Saving updated package information... done.
The OpenVPN Client Export Utility package is not installed.Installation aborted.Backing up libraries...
The OpenVPN Client Export Utility package is not installed.Deletion aborted.Cleaning up... Failed to install package.
Installation halted.
/var/log/system.log shows this….
–-----------------------------------------------
[2.0-RELEASE][root@pfsense01.lipsum.net]/var/log(68): tail -15 system.log
Oct 6 03:40:23 pfsense01 php: : Config sync not being done because of missing sync IP (normal on secondary systems).
Oct 6 03:40:23 pfsense01 php: : Adding TFTP nat rules
Oct 6 03:40:24 pfsense01 root: Countryblock was found not running
Oct 6 03:50:12 pfsense01 check_reload_status: Syncing firewall
Oct 6 03:50:13 pfsense01 php: /pkg_mgr_install.php: Beginning package installation for OpenVPN Client Export Utility.
Oct 6 03:50:13 pfsense01 php: /pkg_mgr_install.php: XML error: XML_ERR_NAME_REQUIRED at line 1903 in /conf/config.xml
Oct 6 03:50:13 pfsense01 php: /pkg_mgr_install.php: pfSense is restoring the configuration /cf/conf/backup/config-1317873012.xml
Oct 6 03:50:13 pfsense01 php: /pkg_mgr_install.php: New alert found: pfSense is restoring the configuration /cf/conf/backup/config-1317873012.xml
Oct 6 03:50:14 pfsense01 check_reload_status: Syncing firewall
Oct 6 03:50:19 pfsense01 php: : Config sync not being done because of missing sync IP (normal on secondary systems).
Oct 6 03:50:19 pfsense01 check_reload_status: Reloading filter
Oct 6 03:50:24 pfsense01 php: : Config sync not being done because of missing sync IP (normal on secondary systems).
Oct 6 03:50:25 pfsense01 php: : Adding TFTP nat rules
Oct 6 03:50:25 pfsense01 root: Countryblock was found not running
CLOG?~|?
[2.0-RELEASE][root@pfsense01.lipsum.net]/var/log(69):–-----------------------------------------------------------
/cf/conf/config.xml.bad shows this….. note line 1903 is bold/italic*
–---------------------------------------------------------
<name>OpenVPN Client Export Utility</name>
<descr>r>
<category>Security</category>
<depends_on_package_base_url>http://files.pfsense.org/packages/amd64/8/All/</depends_on_package_base_url>
<depends_on_package_pbi><0>p7zip-9.20.1-amd64.pbi
<1>zip-3.0-amd64.pbi</depends_on_package_pbi>
<depends_on_package>p7zip-9.13.tbz</depends_on_package>
<depends_on_package>zip-3.0.tbz</depends_on_package>
<build_port_path>/usr/ports/archivers/p7zip</build_port_path>
<build_port_path>/usr/ports/archivers/zip</build_port_path>
<version>0.9.1</version>
<status>BETA</status>
<required_version>2.0</required_version>
<config_file>http://www.pfsense.com/packages/config/openvpn-client-export/openvpn-client-export.xml</config_file>
<configurationfile>openvpn-client-export.xml</configurationfile><menu>
<name>Varnish</name></menu></descr>
-
Hi, I am having the same problem, on dedicated hardware (amd64). I see the "p7zip-9.20.1-amd64.pbi" on the base url in your post. Is there some way to manually pre-install that? will that workaround the issue?
(on a side note, I verified that the sha256 sum matched, but I am really grasping at straws)
The only other thing that catches my eye is the version mismatch on the p7zip between the pbi and the tbz version numbers.
Tommy
-
I think it may be a malformed XML tag ?
"/pkg_mgr_install.php: XML error: XML_ERR_NAME_REQUIRED at line 1903 in /conf/config.xml"
if I run the config.xml through any XML validation online, it does not like the <0> , says it must be alpha-numerical – e.g. <n0>this appears to only be happening on the AMD64 release, I installed the I386(ESXi) release as a test case, and its does not have these problems. Doesnt really help as I need/want to use more than 4gb of RAM</n0>
-
so the same config.xml section on I386 look completely different from the AMD64 version – is there perhaps something borked with the AMD64 repo?
<name>OpenVPN Client Export Utility</name>
<category>Security</category>
<depends_on_package_base_url>http://files.pfsense.org/packages/8/All/</depends_on_package_base_url>
<depends_on_package>p7zip-9.13.tbz</depends_on_package>
<depends_on_package>zip-3.0.tbz</depends_on_package>
<build_port_path>/usr/ports/archivers/p7zip</build_port_path>
<build_port_path>/usr/ports/archivers/zip</build_port_path>
<version>0.9.1</version>
<status>BETA</status>
<required_version>2.0</required_version>
<config_file>http://www.pfsense.com/packages/config/openvpn-client-export/openvpn-client-export.xml</config_file>
<configurationfile>openvpn-client-export.xml</configurationfile><package><name>squid</name>
<website>http://www.squid-cache.org/</website>
<category>Network</category>
<version>2.7.9_4.2</version>
<status>Stable</status>
<required_version>2</required_version>
<maintainer>fernando@netfilter.com.br seth.mos@xs4all.nl mfuchs77@googlemail.com jimp@pfsense.org</maintainer>
–
<depends_on_package>glib-2.28.8.tbz</depends_on_package>
<depends_on_package>libdnet-1.11_3.tbz</depends_on_package>
<depends_on_package>libiconv-1.13.1_1.tbz</depends_on_package>
<depends_on_package>pcre-8.12.tbz</depends_on_package>
<depends_on_package>perl-5.12.3.tbz</depends_on_package>
<depends_on_package>pkg-config-0.25_1.tbz</depends_on_package>
<depends_on_package>python27-2.7.2_1.tbz</depends_on_package></package> -
issued fixed…
http://redmine.pfsense.org/issues/1930Thanks Scott!