Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Swisscom TV (IPTV)

    Scheduled Pinned Locked Moved Firewalling
    5 Posts 4 Posters 8.0k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • F
      fipu
      last edited by

      I'm using pfsense 2.0 release and tried to setup swisscom TV (IPTV). The problem is now that the stream freeze every 10 seconds

      I've done the following configurations:

      IGMP Proxy

      • LAN IF as downstream: 192.168.1.0/24
      • WAN IF as upstream: 224.0.0.0/4, 195.186.0.0/16, 1.1.1.0/24 (I'm not sure if these IP's are correct, I took these IP's from http://forum.pfsense.org/index.php?topic=27155.0)

      Firewall Rules

      • Allow IGMP any to any on WAN IF (Advanced option "This allows packets with IP options to pass." turned on
      • Allow IGMP any to any on LAN IF (Advanced option "This allows packets with IP options to pass." turned on

      Can someone help me solving this problem please?

      1 Reply Last reply Reply Quote 0
      • F
        fipu
        last edited by

        PUSH

        1 Reply Last reply Reply Quote 0
        • C
          chsu83
          last edited by

          Hi there, I'm trying the same.. have you find a solution?

          1 Reply Last reply Reply Quote 0
          • O
            OmAr786
            last edited by

            Hello Everyone,

            You cannot setup Bluewin IPTV behind a firewall. Because you need Multicast on WAN.
            The best way to use PfSense and Bluewin TV together :

            Plug your firewall WAN on your Swisscom LAN port
            PfSense will get a private IP from Swisscom router
            In Swisscom router you have an option in Expert Mode to setup "IP Transparence"
            Setup this option for your firewall in the list
            When you do this Swisscom router will setup your PfSense WAN port with your public IP via DHCP
            Now you have Bluewin TV pluged in Swisscom Router and working and Pfsense with a public IP
            Your WAN port should must be in DHCP mode
            And plug all your network in PfSense LAN port and everything is working correctly.

            Regards

            1 Reply Last reply Reply Quote 0
            • S
              svabi
              last edited by

              you CAN use pfsense + swisscom tv with any VDSL Modem. Use the Config:

              IGMP Proxy

              • LAN IF as downstream: 192.168.1.0/24
              • WAN IF as upstream: 224.0.0.0/4, 195.186.0.0/16, 1.1.1.0/24 (I'm not sure if these IP's are correct, I took these IP's from http://forum.pfsense.org/index.php?topic=27155.0)

              Firewall Rules

              • Allow IGMP any to any on WAN IF (Advanced option "This allows packets with IP options to pass." turned on
              • Allow IGMP any to any on LAN IF (Advanced option "This allows packets with IP options to pass." turned on

              PLUS:

              http://doc.pfsense.org/index.php/IGMP_Proxy

              "You also need a firewall rule on the downstream side (typically LAN) that matches/passes this traffic which has the advanced option checked to allow packets with IP Options."

              regards

              Jan

              1 Reply Last reply Reply Quote 0
              • First post
                Last post
              Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.