Limiter



  • Hi  All
    on experiments to produce the best results.

    I use the limiter in / out for 512kb to 512 for Up and down.

    I have applied at the Floating queue on the WAN interface. http tcp port Lansubnet sources and limit in / out.
    While other ports I do not limite

    I can not see in and out access through a limiter in accordance with setting information on a floating interface wan.

    But if I do a limite on Rules Lan interface without doing Floating, I can see the activity of the source ip and destination ip.

    in this case I have a question why the activity of the source ip and destination ip can not be seen in limiter info?
    How do I view my limiter settings really work?

    Thank you

    ipfw pipe show
    00001: 512.000 Kbit/s    0 ms burst 0
    q131073  50 sl. 0 flows (1 buckets) sched 65537 weight 0 lmax 0 pri 0 droptail
    sched 65537 type FIFO flags 0x1 64 buckets 0 active
        mask:  0x00 0x00000000/0x0000 -> 0xffffffff/0x0000
    BKT Prot Source IP/port_ Dest. IP/port Tot_pkt/bytes Pkt/Byte Drp
    00002: 512.000 Kbit/s    0 ms burst 0
    q131074  50 sl. 0 flows (1 buckets) sched 65538 weight 0 lmax 0 pri 0 droptail
    sched 65538 type FIFO flags 0x1 64 buckets 0 active
        mask:  0x00 0xffffffff/0x0000 -> 0x00000000/0x0000
    BKT Prot Source IP/port_ Dest. IP/port Tot_pkt/bytes Pkt/Byte Drp
    00003: 400.000 Mbit/s    0 ms burst 0
    q131075  50 sl. 0 flows (1 buckets) sched 65539 weight 0 lmax 0 pri 0 droptail
    sched 65539 type FIFO flags 0x1 64 buckets 0 active
        mask:  0x00 0x00000000/0x0000 -> 0xffffffff/0x0000
    BKT Prot Source IP/port_ Dest. IP/port Tot_pkt/bytes Pkt/Byte Drp
    00004: 450.000 Mbit/s    0 ms burst 0
    q131076  50 sl. 0 flows (1 buckets) sched 65540 weight 0 lmax 0 pri 0 droptail
    sched 65540 type FIFO flags 0x1 64 buckets 0 active
        mask:  0x00 0xffffffff/0x0000 -> 0x00000000/0x0000
    BKT Prot Source IP/port_ Dest. IP/port Tot_pkt/bytes Pkt/Byte Drp

    Limiters:info
    00001: 512.000 Kbit/s    0 ms burst 0
    q131073  50 sl. 0 flows (1 buckets) sched 65537 weight 0 lmax 0 pri 0 droptail
    sched 65537 type FIFO flags 0x1 64 buckets 0 active
        mask:  0x00 0x00000000/0x0000 -> 0xffffffff/0x0000
    BKT Prot Source IP/port_ Dest. IP/port Tot_pkt/bytes Pkt/Byte Drp
    00002: 512.000 Kbit/s    0 ms burst 0
    q131074  50 sl. 0 flows (1 buckets) sched 65538 weight 0 lmax 0 pri 0 droptail
    sched 65538 type FIFO flags 0x1 64 buckets 0 active
        mask:  0x00 0xffffffff/0x0000 -> 0x00000000/0x0000
    BKT Prot Source IP/port_ Dest. IP/port Tot_pkt/bytes Pkt/Byte Drp
    00003: 400.000 Mbit/s    0 ms burst 0
    q131075  50 sl. 0 flows (1 buckets) sched 65539 weight 0 lmax 0 pri 0 droptail
    sched 65539 type FIFO flags 0x1 64 buckets 0 active
        mask:  0x00 0x00000000/0x0000 -> 0xffffffff/0x0000
    BKT Prot Source IP/port_ Dest. IP/port Tot_pkt/bytes Pkt/Byte Drp
    00004: 450.000 Mbit/s    0 ms burst 0
    q131076  50 sl. 0 flows (1 buckets) sched 65540 weight 0 lmax 0 pri 0 droptail
    sched 65540 type FIFO flags 0x1 64 buckets 0 active
        mask:  0x00 0xffffffff/0x0000 -> 0x00000000/0x0000
    BKT Prot Source IP/port_ Dest. IP/port Tot_pkt/bytes Pkt/Byte Drp


Log in to reply