Not currently mounted /cf

  • Lets see… I have a full hdd installation. Changed /etc/platform from pfSense to embedded mode. As you see i have issue asking the right question here :)

    I have this in my log.

    php: /exec.php: The command '/sbin/mount -u -r -f -o sync,noatime /cf' returned exit code '1', the output was 'mount: not currently mounted /cf'

    When execute command: mount in webgui i get this;

    $ mount
    /dev/ad0s1a on / (ufs, local, noatime, synchronous)
    devfs on /dev (devfs, local)
    /dev/md0 on /tmp (ufs, local)
    /dev/md1 on /var (ufs, local)
    devfs on /var/dhcpd/dev (devfs, local)

    Whats wrong? can it be fixed? with a command or a file edit?

  • I suspect you should install the nano bsd kit if you want "embedded" install.

    I suspect /etc/platform should be considered "read-only" to tell anyone who cares what platform the code is running on.

  • Rebel Alliance Developer Netgate

    That used to be a quick way to get that behavior in old versions (1.2.2 and before), but it is no longer supported.

    If you just want serial console, then a full install with the embedded kernel is sufficient. If you really want the HDD to go read only, then you probably should image it with a NanoBSD image and run it that way.

Log in to reply