PfBlocker

hubsd

just updated to new version and there is a problem with widget

enabling it will cause other widgets (not all) not to be displayed (ex : interface statistics)

stephenw10

Congratulations guys! :)
This looks like an outstanding package. Genuinely useful.

Steve

marcelloc

just updated to new version and there is a problem with widget

enabling it will cause other widgets (not all) not to be displayed (ex : interface statistics)

~~I will take a look.~~

EDIT

Fixed. Reinstall package in about 15 minutes to get fixed widget file.

Cino

nice work!!! its working nicely on my 2.1-dev box

Cino

After a reboot, I did receive an error alert but the list still loaded:

There were error(s) loading the rules:
/tmp/rules.debug:21: cannot load "/var/db/aliastables/pfBlockerTopSpammers.txt": No such file or directory
/tmp/rules.debug:23: cannot load "/var/db/aliastablespfBlockerBadGuys.txt": No such file or directory
pfctl: Syntax error in config file: pf rules not loaded - The line in question reads [21]: table <pfblockertopspammers>persist file "/var/db/aliastables/pfBlockerTopSpammers.txt"</pfblockertopspammers>

marcelloc

This happens when pfBlocker is running While filter reloads. Boot is one of these cases.

This is not a big deal as pfBlocker call filter reload when finish.

Cino

I figured it would be normal but wanted to share just in-case

eri--

I would recommend you to detect that you are at boot phase and do not don anything.

I generally do not like that packages call filter_configure() but rather would like packages to go and use pfctl themselves and exploit the anchors, though it needs more familiarity with pfctl.

hubsd

@marcelloc:

@hubsd:

just updated to new version and there is a problem with widget

enabling it will cause other widgets (not all) not to be displayed (ex : interface statistics)

~~I will take a look.~~

EDIT

Fixed. Reinstall package in about 15 minutes to get fixed widget file.

thx, I confirm that it works now !

marcelloc

@ermal:

I would recommend you to detect that you are at boot phase and do not don anything.

OK, I will find a way.

@ermal:

I generally do not like that packages call filter_configure() but rather would like packages to go and use pfctl themselves and exploit the anchors, though it needs more familiarity with pfctl.

The first generation of this package (countryblock) was editing /tmp/rules.debug. cmd asked tommyboy to change the way package apply rules.
The fist idea to improve stability was using pfsense 2.0 native options to edit rules. So current version of pfblocker create aliases, rules and then apply with filter_configure(). This was the best way I found to apply rules when users saves pfBlocker's conf.

kevross33

Great package. I have installed the latest version and I am wondering what happened to the deny inbound/outbound option? There are cases where you may block traffic to and from these countries (like countries which both do a lot of attacks, spam etc and host a lot of malware you do not want your users contacting. Is it possible to put that back in please? Thank you

RonpfS

Re-Installed 0.1.4 working fine
one detail … Package Info link still points to Country Block http://forum.pfsense.org/index.php/topic,25732.0.html

firbc

I try to update very large blocklist and I get error:

Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 10106374 bytes) in /usr/local/pkg/pfblocker.inc on line 248

Same list work with IP-blocklist.

And after I put some smaller bloclist I get another error:

php: : There were error(s) loading the rules: /tmp/rules.debug:21: cannot define table pfBlockerblocklist: Cannot allocate memory pfctl: Syntax error in config file: pf rules not loaded - The line in question reads [21]: table <pfblockerblocklist>persist file "/var/db/aliastables/pfBlockerblocklist.txt"</pfblockerblocklist>

marcelloc

@kevross33:

Great package. I have installed the latest version and I am wondering what happened to the deny inbound/outbound option? There are cases where you may block traffic to and from these countries (like countries which both do a lot of attacks, spam etc and host a lot of malware you do not want your users contacting.

In special cases, you can choose alias only option and create your own rule using alias pfBlocker created.

You can also add this list into two aliases and block inbound one and block outbound other.

@kevross33:

Is it possible to put that back in please?

Not sure but I'll take a note.

marcelloc

@firbc:

I try to update very large blocklist and I get error:

Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 10106374 bytes) in /usr/local/pkg/pfblocker.inc on line 248

Same list work with IP-blocklist.

The way pfBlocker downloads list is different then ipblocklist.
To increase php memory limit, edit php.ini:

php.ini location path is:
/usr/local/lib/php.ini or
/usr/local/etc/php.ini

Edit the memory_limit cvar to 256
ie. memory_limit = 256

save file and reboot

@firbc:

And after I put some smaller bloclist I get another error:
php: : There were error(s) loading the rules: /tmp/rules.debug:21: cannot define table pfBlockerblocklist: Cannot allocate memory pfctl: Syntax error in config file: pf rules not loaded - The line in question reads [21]: table <pfblockerblocklist>persist file "/var/db/aliastables/pfBlockerblocklist.txt"</pfblockerblocklist>

check this:

Increase even more Firewall Maximum Table Entries
clear ipblocklist table in diagnostics-> table
check if the value of table-entries in /tmp/rules.debug is the same in Firewall Maximum Table Entries
check also if table-entries is declared twice in /tmp/rules.debug

BUT
The most important thing is: read list description you are including and see if it is realy a bad guys or nasty list.

One example of not bad list is leve1 ip-blocklist file.
See its description:
Author's description:
Companies or organizations who are clearly involved with trying to stop filesharing.
Companies which anti-p2p activity has been seen from.
Companies that produce or have a strong financial interest in copyrighted material.
Government ranges or companies that have a strong financial interest in doing work for governments.
Legal industry ranges.
IPs or ranges of ISPs from which anti-p2p activity has been observed.

marcelloc

@RonpfS:

Re-Installed 0.1.4 working fine
one detail … Package Info link still points to Country Block http://forum.pfsense.org/index.php/topic,25732.0.html

~~Thanks, I'll fix it.~~

Ok, package info fixed.

Thank's for your feedback

RonpfS

@marcelloc:

In special cases, you can choose alias only option and create your own rule using alias pfBlocker created.

You can also add this list into two aliases and block inbound one and block outbound other.

Great if we use the same table inbound and outbound, we can just use one list ;o) and create a FW rule with that list aliasname ;o)

Quinn1981

Nice going guys. :) Having trouble having lists work. I get this when the filter reloads.

There were error(s) loading the rules: /tmp/rules.debug:17: cannot define table pfBlockerantitorrentin: Cannot allocate memory/tmp/rules.debug:19: cannot define table pfBlockerantitorrentout: Cannot allocate memory pfctl: Syntax error in config file: pf rules not loaded - The line in question reads [17]: table persist file "/var/db/aliastables/pfBlockerantitorrentin.txt" …

Going to try the fixes I see in the thread and report back. Thanks again!

marcelloc

After doing tests, don't forget to save pfBlocker config again.

Quinn1981

Reinstalled after the max tables resize and it works a treat. Thanks! :)