PfBlocker

RonpfS

Re-Installed 0.1.4 working fine
one detail … Package Info link still points to Country Block http://forum.pfsense.org/index.php/topic,25732.0.html

firbc

I try to update very large blocklist and I get error:

Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 10106374 bytes) in /usr/local/pkg/pfblocker.inc on line 248

Same list work with IP-blocklist.

And after I put some smaller bloclist I get another error:

php: : There were error(s) loading the rules: /tmp/rules.debug:21: cannot define table pfBlockerblocklist: Cannot allocate memory pfctl: Syntax error in config file: pf rules not loaded - The line in question reads [21]: table <pfblockerblocklist>persist file "/var/db/aliastables/pfBlockerblocklist.txt"</pfblockerblocklist>

marcelloc

@kevross33:

Great package. I have installed the latest version and I am wondering what happened to the deny inbound/outbound option? There are cases where you may block traffic to and from these countries (like countries which both do a lot of attacks, spam etc and host a lot of malware you do not want your users contacting.

In special cases, you can choose alias only option and create your own rule using alias pfBlocker created.

You can also add this list into two aliases and block inbound one and block outbound other.

@kevross33:

Is it possible to put that back in please?

Not sure but I'll take a note.

marcelloc

@firbc:

I try to update very large blocklist and I get error:

Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 10106374 bytes) in /usr/local/pkg/pfblocker.inc on line 248

Same list work with IP-blocklist.

The way pfBlocker downloads list is different then ipblocklist.
To increase php memory limit, edit php.ini:

php.ini location path is:
/usr/local/lib/php.ini or
/usr/local/etc/php.ini

Edit the memory_limit cvar to 256
ie. memory_limit = 256

save file and reboot

@firbc:

And after I put some smaller bloclist I get another error:
php: : There were error(s) loading the rules: /tmp/rules.debug:21: cannot define table pfBlockerblocklist: Cannot allocate memory pfctl: Syntax error in config file: pf rules not loaded - The line in question reads [21]: table <pfblockerblocklist>persist file "/var/db/aliastables/pfBlockerblocklist.txt"</pfblockerblocklist>

check this:

Increase even more Firewall Maximum Table Entries
clear ipblocklist table in diagnostics-> table
check if the value of table-entries in /tmp/rules.debug is the same in Firewall Maximum Table Entries
check also if table-entries is declared twice in /tmp/rules.debug

BUT
The most important thing is: read list description you are including and see if it is realy a bad guys or nasty list.

One example of not bad list is leve1 ip-blocklist file.
See its description:
Author's description:
Companies or organizations who are clearly involved with trying to stop filesharing.
Companies which anti-p2p activity has been seen from.
Companies that produce or have a strong financial interest in copyrighted material.
Government ranges or companies that have a strong financial interest in doing work for governments.
Legal industry ranges.
IPs or ranges of ISPs from which anti-p2p activity has been observed.

marcelloc

@RonpfS:

Re-Installed 0.1.4 working fine
one detail … Package Info link still points to Country Block http://forum.pfsense.org/index.php/topic,25732.0.html

~~Thanks, I'll fix it.~~

Ok, package info fixed.

Thank's for your feedback

RonpfS

@marcelloc:

In special cases, you can choose alias only option and create your own rule using alias pfBlocker created.

You can also add this list into two aliases and block inbound one and block outbound other.

Great if we use the same table inbound and outbound, we can just use one list ;o) and create a FW rule with that list aliasname ;o)

Quinn1981

Nice going guys. :) Having trouble having lists work. I get this when the filter reloads.

There were error(s) loading the rules: /tmp/rules.debug:17: cannot define table pfBlockerantitorrentin: Cannot allocate memory/tmp/rules.debug:19: cannot define table pfBlockerantitorrentout: Cannot allocate memory pfctl: Syntax error in config file: pf rules not loaded - The line in question reads [17]: table persist file "/var/db/aliastables/pfBlockerantitorrentin.txt" …

Going to try the fixes I see in the thread and report back. Thanks again!

marcelloc

After doing tests, don't forget to save pfBlocker config again.

Quinn1981

Reinstalled after the max tables resize and it works a treat. Thanks! :)

RonpfS

I am getting this from time to time: 404 - Not Found

marcelloc

Can you paste the url that gets 404 error?

RonpfS

https://12.34.56.78/pkg_edit.php?xml=pfblocker.xml

this happened at the same time as snort was misbehaving … I removed snort now

marcelloc

the url is fine.

while using some packages, the menu url is prefixed with /packages/something/.
when you choose other url in menu, this prefix persists, and then a 404 error occur.

This is not a problem related to pfBlocker.

hubsd

I discovered a new problem today, pfsense takes more than 1 minute to finish boot (9 minutes to be accurate !)
I noticed that it's blocked most on the time on "Configuring firewall" step.

Without plugin, no problem so…

There is also that usual "Warning message" in webgui after reboot in webgui (then need to "acknowledge all")

Setup is Alix 2c3 + pfsense nanobsd + compact flash 2 GB

Widget and lists :

RAM/CPU/TABLE usage

Packages used

log side, I have this messages (x10)

php: : New alert found: There were error(s) loading the rules: no IP address found for grep: /tmp/rules.debug:18: file "/var/db/aliastables/pfBlockerEurope.txt" contains bad data no IP address found for grep: /tmp/rules.debug:20: file "/var/db/aliastables/pfBlockerInternetTrash.txt" contains bad data no IP address found for grep: /tmp/rules.debug:22: file "/var/db/aliastables/pfBlockerBlizzard.txt" contains bad data no IP address found for grep: /tmp/rules.debug:24: file "/var/db/aliastables/pfBlockeripfilterX.txt" contains bad data pfctl: Syntax error in config file: pf rules not loaded The line in question reads [ /tmp/rules.debug]:

php: : The command '/sbin/pfctl -o basic -f /tmp/rules.debug' returned exit code '1', the output was 'no IP address found for grep: /tmp/rules.debug:18: file "/var/db/aliastables/pfBlockerEurope.txt" contains bad data no IP address found for grep: /tmp/rules.debug:20: file "/var/db/aliastables/pfBlockerInternetTrash.txt" contains bad data no IP address found for grep: /tmp/rules.debug:22: file "/var/db/aliastables/pfBlockerBlizzard.txt" contains bad data no IP address found for grep: /tmp/rules.debug:24: file "/var/db/aliastables/pfBlockeripfilterX.txt" contains bad data pfctl: Syntax error in config file: pf rules not loaded'

ghm

@hubsd:

I discovered a new problem today, pfsense takes more than 1 minute to finish boot (9 minutes to be accurate !)

Setup is Alix 2c3 + pfsense nanobsd + compact flash 2 GB

Same here - massive issues on 2.0 embedded (Countryblock works apart from logging though). I see loads of:

Nov 4 14:14:29 	php: : There were error(s) loading the rules: no IP address found for grep: /tmp/rules.debug:24: file "/var/db/aliastables/pfBlockerEurope.txt" contains bad data no IP address found for grep: /tmp/rules.debug:26: file "/var/db/aliastables/pfBlockerNorthAmerica.txt" contains bad data no IP address found for grep: /tmp/rules.debug:28: file "/var/db/aliastables/pfBlockerOceania.txt" contains bad data no IP address found for grep: /tmp/rules.debug:30: file "/var/db/aliastables/pfBlockerSouthAmerica.txt" contains bad data no IP address found for grep: /tmp/rules.debug:32: file "/var/db/aliastables/pfBlockerTopSpammers.txt" contains bad data pfctl: Syntax error in config file: pf rules not loaded - The line in question reads [ /tmp/rules.debug]:
Nov 4 14:14:29 	php: : New alert found: There were error(s) loading the rules: no IP address found for grep: /tmp/rules.debug:24: file "/var/db/aliastables/pfBlockerEurope.txt" contains bad data no IP address found for grep: /tmp/rules.debug:26: file "/var/db/aliastables/pfBlockerNorthAmerica.txt" contains bad data no IP address found for grep: /tmp/rules.debug:28: file "/var/db/aliastables/pfBlockerOceania.txt" contains bad data no IP address found for grep: /tmp/rules.debug:30: file "/var/db/aliastables/pfBlockerSouthAmerica.txt" contains bad data no IP address found for grep: /tmp/rules.debug:32: file "/var/db/aliastables/pfBlockerTopSpammers.txt" contains bad data pfctl: Syntax error in config file: pf rules not loaded The line in question reads [ /tmp/rules.debug]:
Nov 4 14:14:28 	php: : The command '/sbin/pfctl -o basic -f /tmp/rules.debug' returned exit code '1', the output was 'no IP address found for grep: /tmp/rules.debug:24: file "/var/db/aliastables/pfBlockerEurope.txt" contains bad data no IP address found for grep: /tmp/rules.debug:26: file "/var/db/aliastables/pfBlockerNorthAmerica.txt" contains bad data no IP address found for grep: /tmp/rules.debug:28: file "/var/db/aliastables/pfBlockerOceania.txt" contains bad data no IP address found for grep: /tmp/rules.debug:30: file "/var/db/aliastables/pfBlockerSouthAmerica.txt" contains bad data no IP address found for grep: /tmp/rules.debug:32: file "/var/db/aliastables/pfBlockerTopSpammers.txt" contains bad data pfctl: Syntax error in config file: pf rules not loaded'

The firewall seems to be blocked then altogether. I guess there's an issue with rw mounting nanobsd…
Went back to Countryblock for the time being.
Featurewise pfBlocker seems great though!

marcelloc

I found a fetch issue While booting and on url table pfblocker get file function. ~~I'm fixing it today.~~

EDIT

version 0.1.4.1 released with fixes in:

boot process
embedded platform
url table get file package function

Many thanks for all of you that are helping us with this package.

Hugovsky

Very nice package, indeed. No errors to report so far. pfsense 2.0 release amd64.

hubsd

ok, now it takes 3/4 minutes to finish boot (better than 9 minutes)

I still have those warning messages

There were error(s) loading the rules: no IP address found for grep:
/tmp/rules.debug:18: file "/var/db/aliastables/pfBlockerEurope.txt" contains bad data
pfctl: Syntax error in config file: pf rules not loaded The line in question reads [
/tmp/rules.debug]:

There were error(s) loading the rules: no IP address found for grep:
/tmp/rules.debug:18: file "/var/db/aliastables/pfBlockerEurope.txt" contains bad data
pfctl: Syntax error in config file: pf rules not loaded The line in question reads [
/tmp/rules.debug]:

There were error(s) loading the rules: no IP address found for grep:
/tmp/rules.debug:18: file "/var/db/aliastables/pfBlockerEurope.txt" contains bad data
pfctl: Syntax error in config file: pf rules not loaded The line in question reads [
/tmp/rules.debug]:

There were error(s) loading the rules: no IP address found for grep:
/tmp/rules.debug:18: file "/var/db/aliastables/pfBlockerEurope.txt" contains bad data
pfctl: Syntax error in config file: pf rules not loaded The line in question reads [
/tmp/rules.debug]:

There were error(s) loading the rules: no IP address found for grep:
/tmp/rules.debug:18: file "/var/db/aliastables/pfBlockerEurope.txt" contains bad data
pfctl: Syntax error in config file: pf rules not loaded The line in question reads [
/tmp/rules.debug]:

There were error(s) loading the rules: no IP address found for grep:
/tmp/rules.debug:18: file "/var/db/aliastables/pfBlockerEurope.txt" contains bad data
pfctl: Syntax error in config file: pf rules not loaded The line in question reads [
/tmp/rules.debug]:

There were error(s) loading the rules: no IP address found for grep:
/tmp/rules.debug:18: file "/var/db/aliastables/pfBlockerEurope.txt" contains bad data
pfctl: Syntax error in config file: pf rules not loaded The line in question reads [
/tmp/rules.debug]:

There were error(s) loading the rules: no IP address found for grep:
/tmp/rules.debug:18: file "/var/db/aliastables/pfBlockerEurope.txt" contains bad data
pfctl: Syntax error in config file: pf rules not loaded The line in question reads [
/tmp/rules.debug]:

There were error(s) loading the rules: no IP address found for grep:
/tmp/rules.debug:18: file "/var/db/aliastables/pfBlockerEurope.txt" contains bad data
pfctl: Syntax error in config file: pf rules not loaded The line in question reads [
/tmp/rules.debug]:

marcelloc

what version are you using?

I have no embedded hardware to test it, I'm looking a way to do this using virtualbox.

hubsd

pfSense 2.0-RELEASE (i386) / nanobsd on Compact Flash 2 Gb
pfBlocker-dev 0.1.4.1

I have a 4 Gb microdrive somewhere, should I give it a try ?