Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Search
    • Register
    • Login
    Introducing Netgate Nexus: Multi-Instance Management at Your Fingertips.

    Help with tiers

    Scheduled Pinned Locked Moved Routing and Multi WAN
    4 Posts 2 Posters 2.1k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • C
      costasppc
      last edited by

      Hello,

      PFsense 2.0 on Alix 2D3 hardware.

      I have 3 WANs, and I need to create a WAN group to be used for load balancing and failover. The 2 WANs are fast, the one is slower.

      If I create a gateway group and set tier 5 to the fast WANs and tier 1 in the slower, I should have (round robined) 10 connections with the fast and 1 with the slower, right?

      Do I have to create failover groups? If one WAN fails isn't automatically excluded from the group?

      Is it included again when is up?

      Do I have to set the WAN group as gateway somewhere?

      Best regards and thank you very much

      Kostas

      1 Reply Last reply
      Reply Quote 0
      • N
        Nachtfalke
        last edited by

        You are wrong!

        Set all three WANs to the same Tier - Tier 1. This means that there is round robin between all three WANs. If one or two WANs are down then it automatically failover to the third WAN. If only one WAN is down then there is round robin between the two WANs.
        GW in a Group with the SAME Tier will du LoadBalancing and Failover.
        Different Tiers mean, that only if all GWs of Tier1 are down there is a failover to the next Tier level.

        To change the weight between the WANs you have to go to your Gateways (not GW Groups) and then select there the weight.

        For example if you have:

        WAN1 = 20MBit/s
        WAN2 = 10Mbit/s
        WAN3 = 5Mbit/s

        than you should use:
        WAN1 = weight 4
        WAN2 = weight 2
        WAN3 = weight 1

        Hope this will help you.

        1 Reply Last reply
        Reply Quote 0
        • C
          costasppc
          last edited by

          Thank you very much!

          I will try and post again.

          Best regards

          Kostas

          1 Reply Last reply
          Reply Quote 0
          • N
            Nachtfalke
            last edited by

            Yes, please post back if it works, fails or if you have further questions :-)

            1 Reply Last reply
            Reply Quote 0

            Hello! It looks like you're interested in this conversation, but you don't have an account yet.

            Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

            With your input, this post could be even better 💗

            Register Login
            • First post
              Last post
            Copyright 2026 Rubicon Communications LLC (Netgate). All rights reserved.
            Privacy Policy · Cookie Policy