Alix2D13 upgrade from 1.2.3 to 2.0-Release failing
I've tried upgrading from the GUI and CLI. This is the 2G nanobsd upgrade image
At least in the CLI, I can see the whole process proceed normally until it gets to the part where it's actually updating.
1) Update from a URL 2) Update from a local file Q) Quit Please select an option to continue: 1 Enter the URL to the .tgz update file: > http://files.chi.pfsense.org/mirror/updates/pfSense-2.0-RELEASE-2g-i386-nanobsd-upgrade.img.gz Fetching file size... File size: 68229808 Fetching file... looking up files.chi.pfsense.org connecting to files.chi.pfsense.org:80 requesting http://files.chi.pfsense.org/mirror/updates/pfSense-2.0-RELEASE-2g-i386-nanobsd-upgrade.img.gz remote size / mtime: 68229808 / 1316225048 /root/firmware.tgz 100% of 65 MB 1759 kBps 00m00s Fetching MD5... looking up files.chi.pfsense.org connecting to files.chi.pfsense.org:80 requesting http://files.chi.pfsense.org/mirror/updates/pfSense-2.0-RELEASE-2g-i386-nanobsd-upgrade.img.gz.md5 remote size / mtime: 92 / 1316225048 /root/firmware.tgz.md5 100% of 92 B 58 kBps URL MD5: 96672e01257370aaf60159f2dbc91fbb Downloaded file MD5: 96672e01257370aaf60159f2dbc91fbb MD5 checksum matches. NanoBSD upgrade file detected... One moment please... Invoking firmware upgrade...
It's been doing this for about 20 minutes now.
I originally had problems when trying to upgrade to the 2.0-RC3 build…so I figured I'd just wait until the final release and then try it again. Looks like the same type issue as before.
Any way to troubleshoot this?
Okay, here's a clue.
/etc/rc.firmware pfSenseNanoBSDupgrade /root/pfSense-2.0-RELEASE-2g-i386-nanobsd-upgrade.img.gz Broadcast Message from email@example.com (no tty) at 12:37 EST... NanoBSD Firmware upgrade in progress... Broadcast Message from firstname.lastname@example.org (no tty) at 12:37 EST... Installing /root/pfSense-2.0-RELEASE-2g-i386-nanobsd-upgrade.img.gz. kern.geom.debugflags: 16 -> 16 Something went wrong when trying to update the fstab entry. Aborting upgrade.
What exactly does the part "kern.geom.debugflags: 16 -> 16" mean?
Also, tested and verified that fstab is setup correct and that I could successfully make modifications to it using vi.