NanoBSD rw issue

Hi,

i recently switched to pfSense 2.0 with a fresh install. Using the embedded version on an CF.

The problem ist that the partitions who should be ro are mounted rw. So i guess the CF would last long.
I executed /etc/rc.conf_mount_ro but mount -p still shows:

/dev/ufs/pfsense0 / ufs sync,noatime 1 1
devfs /dev devfs rw 0 0
/dev/md0 /tmp ufs rw 2 2
/dev/md1 /var ufs rw 2 2
/dev/ufs/cf /cf ufs sync,noatime 1 1
devfs /var/dhcpd/dev devfs rw 0 0

How is this possible? Only used the snort stable package for a short time. But its removed already.
Any idea how i can fix this? Or for what i can look? I am a but clueless right now.

stephenw10

This is a known bug. http://redmine.pfsense.org/issues/1279
It won't cause your CF card to fail though since nothing writes to the card anyway. Mounting it RO just ensures this.

Steve

Edit: See this thread for more.

dotdash

If you do this from the shell, instead of the WebGUI, it shows the ro flag.

EDIT- Here is the command from the same box ssh first, and then Diag, Command

_/dev/ufs/pfsense0 / ufs ro,sync,noatime 1 1
devfs /dev devfs rw 0 0
/dev/md0 /tmp ufs rw 2 2
/dev/md1 /var ufs rw 2 2
/dev/ufs/cf /cf ufs ro,sync,noatime 1 1
devfs /var/dhcpd/dev devfs rw 0 0

/dev/ufs/pfsense0 / ufs sync,noatime 1 1
devfs /dev devfs rw 0 0
/dev/md0 /tmp ufs rw 2 2
/dev/md1 /var ufs rw 2 2
/dev/ufs/cf /cf ufs sync,noatime 1 1
devfs /var/dhcpd/dev devfs rw 0 0_

stephenw10

Hmm, that's pretty odd! ???

Are you logged in as admin or root at the shell?

Steve

dotdash

SSH'd in as admin, dropped to shell from menu.

jimp

Diag > Command will always show rw because it switches to rw to run your command.

Only when viewed from the shell on the console/ssh will you see ro.