Watchguard XTM 5 Series

stephenw10

Ah, sorry I thought I'd included the sysctl command. Fail.

I also forgot that you need an aml file loaded to get speedstep to work because the bios doesn't generate the p-state tables by default in the xtm5. That's the main reason for loading one.

It also looks like it only supports C1 and that's enabled anyway.

Also C-states are different to P-states which is what speedstep and turbo control.
See: https://en.wikipedia.org/wiki/ACPI#Power_states

tiggymiggy

@stephenw10

OK, so looks like I need to generate this file. All I can find is Hackintosh community posts. Is it the same process?

stephenw10

Yup. Try my 8400 file. Probably a single edit from that. Or it might just work fine as is.
xtm5_e8400.aml.txt

tiggymiggy

@stephenw10 Thanks for this file, I will try it in my pfsense install per your earlier posts in this thread.

I am comparing it ti t-rexy's aml files, looks like I just need to get the right values in the _pr section.. The question is, how do I find or generate the correct values for this section?

 Scope (_PR)
    {
        Processor (CPU1, 0x01, 0x00000810, 0x06)
        {
            Name (_PPC, Zero)  // _PPC: Performance Present Capabilities
            Name (_PCT, Package (0x02)  // _PCT: Performance Control
            {
                ResourceTemplate ()
                {
                    Register (FFixedHW, 
                        0x10,               // Bit Width
                        0x00,               // Bit Offset
                        0x0000000000000199, // Address
                        ,)
                }, 

                ResourceTemplate ()
                {
                    Register (FFixedHW, 
                        0x10,               // Bit Width
                        0x00,               // Bit Offset
                        0x0000000000000198, // Address
                        ,)
                }
            })
            Name (_CST, Package (0x02)  // _CST: C-States
            {
                One, 
                Package (0x04)
                {
                    ResourceTemplate ()
                    {
                        Register (FFixedHW, 
                            0x01,               // Bit Width
                            0x02,               // Bit Offset
                            0x0000000000000000, // Address
                            0x01,               // Access Size
                            )
                    }, 

                    One, 
                    0x02, 
                    0x61A8
                }
            })
            Name (_PSS, Package (0x04)  // _PSS: Performance Supported States
            {
                Package (0x06)
                {
                    0x0BB8, 
                    0xFDE8, 
                    0x0A, 
                    0x0A, 
                    0x0924, 
                    0x0924
                }, 

                Package (0x06)
                {
                    0x0A6A, 
                    0xD228, 
                    0x0A, 
                    0x0A, 
                    0x081E, 
                    0x081E
                }, 

                Package (0x06)
                {
                    0x091D, 
                    0xB98C, 
                    0x0A, 
                    0x0A, 
                    0x071A, 
                    0x071A
                }, 

                Package (0x06)
                {
                    0x07D0, 
                    0xA410, 
                    0x0A, 
                    0x0A, 
                    0x0616, 
                    0x0616
                }
            })
        }

EDIT:
File works! Now showing frequency strangely enough, of course max is now showing 3Ghz as the 8400 max frequency is. Really excited to get this aml file sorted!

stephenw10

            Package (0x06)
            {
                0x07D0, 
                0xA410, 
                0x0A, 
                0x0A, 
                0x0616, 
                0x0616
            }

It's been a while but IIRC you need one entry for each state.
0x07D0 is 2000MHz the lowest speed
0xA410 is the CPU voltage but I forget how that's calculated
0x0616 is the CPU wattage passed to the OS, what pfSense shows in the sysctls.

tiggymiggy

@stephenw10

Could the voltage calculation have something to do with this? values are off... seem to need to divide by 4 to get in the right ballpark. i will keep looking though

Meaning of the fid and vid
The frequency ID (fid) is the multiplier for the reference clock (e.g. the FSB clock). The voltage ID (vid) is processor specific.

Unfortunately Intel publishes no information about the meaning of this value but the conversion formula for Core CPU's seems to be

UCpu = 700 mV + vid x 12.5 mV

and for Core 2 CPU's it seems to be

UCpu = 800 mV + vid x 12.5 mV

Xerox

Hi all
Is amibcp useful to change what is displayed on LCD ??
What field ?

After flashrom xtm5_83.rom it displays pfsense v1.8

stephenw10

You have to extract the module and then hex-edit it to change that. Or at least that's what I did long, long ago!

There are some more details on the forum here if you search through it.

Steve

CodeJACK

Maybe you are referring to once pfsense is booted, you want to see other details on the LCD?

If so, you need to install the LCDproc package from the pfsense package manager. You will then see all the options that can be output on the LCD.

I've not been able to get this working with 2.7 though. So if anyone has any ideas for that???

stephenw10

Works fine in 2.7 for me. What problem are you seeing?

The only issue is the button mapping is incorrect. I think that's because it conflicted with the older devices at the time but none of those run pfSense any longer so maybe time to update it.

CodeJACK

@stephenw10 LCDproc service wont even start on mine.

Maybe its something left over from the upgrade as the install of Unifi Network Manager is also screwed since upgrading. ( https://github.com/unofficial-unifi/unifi-pfsense )

Is there any log in particular that I can explore to find out exactly why the service wont start?

stephenw10

Try to start the service then check the system log. Though anything could be happening if you loaded that unifi package. That could very well be completely broken in 2.7 and may have pulled in some bad pkgs that also broke lcdproc.

CodeJACK

@stephenw10 Yeah, I thought that too but stripped it out and still have the same issue. I might try fresh install this weekend and see if there is any better results.

stephenw10

If you try starting lcdproc at the CLI it might throw more useful errors. If there have been some bad packages pulled in there will likely be missing lib errors.

CodeJACK

@stephenw10 OK, couldnt wait and had a look. So it seems there was a new version of LCDproc released in the past couple of days. I was using 0.11.4_1 but this version is now installed: 0.11.4_2
Yup, some changes were made but not seemingly something that should have affected me:
https://github.com/pfsense/FreeBSD-ports/commits/devel/sysutils/pfSense-pkg-LCDproc

It wouldnt start manually either when i ran "service lcdproc onestart" so I tried running "service LCDd onestart" and it started and displayed the server stats. So I restarted LCDproc and now its running without issues :-)

So I was either doing something stupid before or this new versions resolved something. Im thinking the former :-)

Xerox

I never installed pfsense on this machine, I installed a voip pbx based on centos7, installed flashrom and flashed xtm5_83.rom
From there, display says "pfsense v1.8" or so....

stephenw10

Yeah, it's hardcoded in the BIOS module. To remind you to install pfSense.

Xerox

So can't I modify the .rom file directly ?

stephenw10

That's not what I did. I opened the rom file, extracted the module, hex-edited it then reinserted the module. It was years ago though and pretty much the first time I'd tried anything like that so there may well be a better way now.

Xerox

Well, I don't understand the part "extract" the module from .rom file, which software to do it ?