Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Watchguard XTM 5 Series

    Hardware
    129
    1.1k
    1.1m
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • D
      DeLorean
      last edited by

      @747Builder:

      NO i havent tried the SPI connector YET… ill have to take a good look at the pinout and make a cable up that plugs in. i make up cables for each different device i use the SPI connector on. ill order the parts tonight

      You can try a USB 9pin header cable (the cable from motherboard to the front USB ports in some cases).
      The pinsout of the SPI connector are 1:1 as the chip, except the above 2 pins are not used.
      I have measured this by a multimeter @ Continuity mode (beep)

      Grtz
      DeLorean

      ![pinsout SPI connector.PNG](/public/imported_attachments/1/pinsout SPI connector.PNG)
      ![pinsout SPI connector.PNG_thumb](/public/imported_attachments/1/pinsout SPI connector.PNG_thumb)
      ![ST M25P80 pinsout.PNG](/public/imported_attachments/1/ST M25P80 pinsout.PNG)
      ![ST M25P80 pinsout.PNG_thumb](/public/imported_attachments/1/ST M25P80 pinsout.PNG_thumb)

      1 Reply Last reply Reply Quote 0
      • ?
        A Former User
        last edited by

        This post is deleted!
        1 Reply Last reply Reply Quote 0
        • chpalmerC
          chpalmer
          last edited by

          Mentioned back on page 26..    https://tostarcn.en.alibaba.com/product/60037013540-800213290/Intel_B75_LGA1155_1u_Firewall_Server_with_6_LAN_and_Bypass_10_Gigabit_Optical_Card.html

          Does anyone know where one could obtain that expanded card with the optical interface?  Looks like it would work on an XTM5..

          Intel-B75-LGA1155-1u.jpg_thumb
          Intel-B75-LGA1155-1u.jpg

          Triggering snowflakes one by one..
          Intel(R) Core(TM) i5-4590T CPU @ 2.00GHz on an M400 WG box.

          1 Reply Last reply Reply Quote 0
          • chpalmerC
            chpalmer
            last edited by

            https://www.alibaba.com/product-detail/N70SL-B-1U-1037U-Firewall-Motherboard_60063994554.html

            Slot is actually on the motherboard dag nab it!

            Triggering snowflakes one by one..
            Intel(R) Core(TM) i5-4590T CPU @ 2.00GHz on an M400 WG box.

            1 Reply Last reply Reply Quote 0
            • H
              hayrullahberk
              last edited by

              i have a small question what is the maximum system requirements for xtm505 - mb-7850 v1.0 motherboard ?

              1 Reply Last reply Reply Quote 0
              • D
                DeLorean
                last edited by

                @hayrullahberk:

                i have a small question what is the maximum system requirements for xtm505 - mb-7850 v1.0 motherboard ?

                Hardware (motherboard) doesn't have system requirements.
                System requirements are for software.
                Do you mean, what the maximum amount of Ram is and which is the fasfest Cpu that the motherboard supports ?

                The maximum amount of Ram supported on a XTM5 is 4Gb DDR2 (as the motherboard manual says),
                but i have read story's about succesfully using 8Gb.
                For the fasfest Cpu, that's a tricky question to answer.
                By default, a XTM5 series motherboard has a cpu in the range of 65Watt TDP, if you wanna stay in this temperaturerange,
                then the Intel Core 2 Quad Q9550s – 2.83 GHz - 1333Mhz is the fastest.

                Grtz
                DeLorean

                1 Reply Last reply Reply Quote 0
                • H
                  hayrullahberk
                  last edited by

                  Very Thanks  :) :) :)

                  1 Reply Last reply Reply Quote 0
                  • stephenw10S
                    stephenw10 Netgate Administrator
                    last edited by

                    Some Xeons will run in it either the socket 775 models or the socket 771 with the pin-mod. Not sure they're any faster than the C2Q though. I've not personally tried but there are reports in this thread.

                    Steve

                    1 Reply Last reply Reply Quote 0
                    • ?
                      A Former User
                      last edited by

                      This post is deleted!
                      1 Reply Last reply Reply Quote 0
                      • ?
                        A Former User
                        last edited by

                        This post is deleted!
                        1 Reply Last reply Reply Quote 0
                        • D
                          DeLorean
                          last edited by

                          @747Builder:

                          Delorean,

                          pin 3 isnt connected between the SPI header and the chip on mine but the SHIELDED cable i used to connect the adapter on my willems programmer works great and can read/write the flash chip just fine from the SPI header.

                          Thanks for the update.
                          In the meanwhile i have finally tried the BIOS update with flashrom trough serial console,
                          and succesfully updated 5 of these red boxes  :)
                          But now i'm sure that your programmer works, and this is my lifeline if anything goes wrong.
                          I have now flashed all XTM 5 boxes here in the house, and i'm safe for the moment.
                          Thanks for taking the time to investigate this. ;-)

                          ps : can you give a link of the shielded cable you used ?

                          Grtz
                          DeLorean

                          1 Reply Last reply Reply Quote 0
                          • ?
                            A Former User
                            last edited by

                            This post is deleted!
                            1 Reply Last reply Reply Quote 0
                            • D
                              dlucas46
                              last edited by

                              Those of you that are running Xeon processors have you had any problems with the temperature sensors?

                              I have just done my first 771 to 775 mod on one of these watchguards and want to confirm if I am seeing an error or usual behaviour since the microcode in the BIOS might be wrong.

                              I installed a L5420 and the dashboard widget is reporting over 70 Celsius but the BIOS is reporting about 40 Celsius.

                              I am using the Intel Core temp sensor option in settings and not None / ACPI.

                              Anybody else seen this behaviour before?  Which temperature is correct?

                              Should I redo the thermal paste?  I did not use Arctic silver but cheap gold stuff, as I had run out of the good stuff.  Since the two are reporting different temps I would think that the paste might be OK.

                              Thanks

                              1 Reply Last reply Reply Quote 0
                              • stephenw10S
                                stephenw10 Netgate Administrator
                                last edited by

                                It could very likely be incorrect.

                                The coretemp driver reads a delta value from the CPU sensor and removes that from a known maximum value for the CPU. But since you've modified the CPU to pretend to be something else it's probably using the wrong values there. No way to fix that in software that I know of. Check your Tjmax value against the documented value for that CPU:

                                [2.4.0-BETA][admin@xtm5.stevew.lan]/root: sysctl dev.cpu.0.coretemp
dev.cpu.0.coretemp.throttle_log: 0
dev.cpu.0.coretemp.tjmax: 85.0C
dev.cpu.0.coretemp.resolution: 1
dev.cpu.0.coretemp.delta: 53

                                Steve

                                1 Reply Last reply Reply Quote 0
                                • D
                                  dlucas46
                                  last edited by

                                  Hi Steve,

                                  I guessed Coretemp was the issue. 
                                  The Tjmax for a L5420 is 70c but coretemp sets the processor to 105c.

                                  As far as I can see this is because the code contains an else if clause for the core2duo but the Xeon has the same family model Id (0x17) and the same stepping (6) so the code executes and sets the wrong value.
                                  I have modified the coretemp.c file on a 10.3 BSD and rebuilt it to set a tjmax of 70 instead.

                                  Have just loaded it up and now have dashboard and widget reporting 40c instead of 75c.

                                  I will do some testing and then post it here.

                                  1 Reply Last reply Reply Quote 0
                                  • D
                                    DeLorean
                                    last edited by

                                    @stephenw10:

                                    It could very likely be incorrect.

                                    The coretemp driver reads a delta value from the CPU sensor and removes that from a known maximum value for the CPU. But since you've modified the CPU to pretend to be something else it's probably using the wrong values there. No way to fix that in software that I know of. Check your Tjmax value against the documented value for that CPU:

                                    [2.4.0-BETA][admin@xtm5.stevew.lan]/root: sysctl dev.cpu.0.coretemp
dev.cpu.0.coretemp.throttle_log: 0
dev.cpu.0.coretemp.tjmax: 85.0C
dev.cpu.0.coretemp.resolution: 1
dev.cpu.0.coretemp.delta: 53

                                    Steve

                                    On YouTube there is a vid about LGA775 to LGA771 mod ,
                                    and this vid explains the use of a tool for modifying / adding cpu instructionsets to the BIOS rom file,
                                    can this be usefull for a XTM5 or not ?

                                    This is the link of the vid :
                                    https://www.youtube.com/watch?v=HUqBW-kq1_0

                                    Grtz
                                    DeLorean

                                    1 Reply Last reply Reply Quote 0
                                    • stephenw10S
                                      stephenw10 Netgate Administrator
                                      last edited by

                                      Mmm, that would probably work. Not sure I have the tools I used anymore. Definitely don't have the WinXP system I did all that on.  ;)

                                      Be ready to recover from bricking though if you try it!

                                      Steve

                                      1 Reply Last reply Reply Quote 0
                                      • ?
                                        A Former User
                                        last edited by

                                        This post is deleted!
                                        1 Reply Last reply Reply Quote 0
                                        • W
                                          wubs
                                          last edited by

                                          I hope this isn't too off topic, but I've got an XTM 525 and I can only get WGXepc64 to control the case fan. Has anyone in this thread had any luck with controlling the 2 CPU and/or PSU fans? My only thought is to swap one of the CPU fans to run on the case fan connector and remove the case fan entirely, but then I'm still stuck with one fan at 100% all the time for the CPU cooler and also the one for the PSU. I also don't know if there is a way to specify specific fans in WGXepc64, but the default at least seems to be the case fan. I really just want to quiet this box down so it can hang out in my office without sounding like an airplane is taking off constantly.

                                          1 Reply Last reply Reply Quote 0
                                          • stephenw10S
                                            stephenw10 Netgate Administrator
                                            last edited by

                                            For some reason the CPU fans are controller by a separate chip that is connected only via SMBus. Despite the LPC controller having multiple FAN outputs.

                                            WGXepc only has access to the LPC controller so cannot set the CPU fan speed, in the default fan setup at least.

                                            https://forum.pfsense.org/index.php?topic=43574.msg717350#msg717350

                                            Steve

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post