Watchguard XTM 5 Series
-
I'm sure you could use a hardware controller. Personally I would just get some quieter fans if you need it.
Steve
I ordered three of these and am going to nix the case fan entirely. My wife just wants it to be quieter in our office. :X
https://www.amazon.com/gp/product/B000LB0M8S/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 -
Does anyone have any rack mount ears they are willing to sell?
I am in the UK. Cheers.
-
I just put to of these ( Crucial CT25664AA800 Specs: DDR2 PC2-6400 • CL=6 • Unbuffered • NON-ECC • DDR2-800 • 1.8V • 256Meg x 64) into my XTM-505, recognized by stock BIOS w/o any issues. Send me a PM if you'd like to buy ($20 shipped) the other pair I have. @dhoffman98:
@747Builder:
dont forget you need low density 4G sticks… apparently NON low density sticks dont work.
Right… Forgot to mention that was another requirement on my list.
NON ECC
Unbuffered
AND Low Density.I'm finding them out there, but it's almost $50 per stick.
I'd like to set up Squid, but only have 2GB right now, and hear that would take more than 2GB.
-
Does anyone have any rack mount ears they are willing to sell?
I am in the UK. Cheers.
Good luck! These are a rare find.
-
I have flashed pfsense 2.3.4 to a CF card, it boots and i can access the BIOS, but when PFsense boots there is no text on the screen. Does anyone have an image they could send me with pfsense and interfaces already setup?
-
I have flashed pfsense 2.3.4 to a CF card, it boots and i can access the BIOS, but when PFsense boots there is no text on the screen. Does anyone have an image they could send me with pfsense and interfaces already setup?
I think you use the VGA version instead of the Serial version.
You need to use this version :
https://nyifiles.pfsense.org/mirror/downloads/pfSense-CE-2.3.4-RELEASE-4g-amd64-nanobsd.img.gzI presume you unzipped the .gz file and used Win32 Disk Imager for placing the .IMG on your CF card ?
Grtz
DeLorean -
Thanks for the pointer. That worked. I was also using 32 version before. I was hoping someone could send me an image of their setup with things such as lcdproc and stuff already setup so I don't have to tinker with it myself :)
-
Tinkering is half the fun! ;)
-
Tinkering is half the fun! ;)
Do you know which settings should be used to get LCDproc package working in pfsense 2.3.4? Is Lcdproc working with XTM5? thanks
-
Yes it works. Just choose the SDEC driver. Most of the other settings there are hard coded anyway.
Steve
-
Yes it works. Just choose the SDEC driver. Most of the other settings there are hard coded anyway.
Steve
I have selected this setting and also selected start on boot, but i can't seem to get lcdproc service to start. When I go to Status>services and try to manually start LCDpro c it refuses to start. Do you have any ideas?
-
Did you choose some screens for it to display on the second tab?
Steve
-
I'm sure you could use a hardware controller. Personally I would just get some quieter fans if you need it.
Steve
I ordered three of these and am going to nix the case fan entirely. My wife just wants it to be quieter in our office. :X
https://www.amazon.com/gp/product/B000LB0M8S/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1I tried out some fans on my XTM 520 and found that they run slower and moved lesser air. I this OK?
Here is the fan: https://www.komplett.no/product/770799/datautstyr/pc-komponenter/vifterkjoelingvannkjoeling/vifter/noctua-nf-a4x10-flx-40mm-vifte# -
The original fans are 20mm tick and you replaced them with 10mm tick fans.
The thinner the fans are, the less air they move, so that behaviour is normal.ps: i prefer to use Sunon fans, because these are very reliable and silent.
Grtz
DeLorean -
This post is deleted! -
Interesting. I doubt the serial is stored in the BIOS ROM. It may be checking the BIOS hash output perhaps.
Which BIOS did you test? The initial mod I made was only to change the user level to allow access. Hard to believe that would have had much effect there. Though at that time the editor program available to me produced corrupted images quite often. Hmm looking back though I'm not sure I ever uploaded that image anywhere…
Steve
-
This post is deleted! -
Well, it's possible. But that would mean an individual BIOS image for each box which seems unlikely.
If that is that case I suspect that the bios editior is overwriting some custom part of the image it doesn't know about. I'm not sure there's anything we can do about that.
Steve
-
Hi there, I just got my hands on a XTM 5 and wanted to play with pfSense, Strangely it has a newer BIOS Version WD0 from 04/26/2010. I found no info about that. Since I wanted to upgrade the Processor and enable Speedstep to reduce Power consumption, the BIOS mod surely will not work for my Device or can I simply downgrade the BIOS to the mod'ed Version?
-
Hi, Any support for Watchguard XTM 5 series XTM 535? I know XTM 530 is supported, but cannot find any information on XTM 535. Picked up a XTM 535 for $100 and want to wipe watch guard OS and install pfsense.
