Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Watchguard XTM 5 Series

    Scheduled Pinned Locked Moved
    Hardware
    129
    1.1k
    1.2m
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • F
      Fffrank @samtap
      last edited by

      @samtap It's actually the tab key on vt100.

      I was finally able to get mine to boot again. I don't know if I had a bad CF card or if my processor was causing issues. Another E8500 was <$10 so I swapped that out and replaced my CF card. Wrote the image on my card reader from Windows with Rufus and it booted right up. It still has an issue where occasionally the console will continue past the bios with (my guess) black on black text.... but pulling the cables and re-initializing putty brings it back up.

      From the CF card I installed PFSense to a 60gb hard drive that I pulled out of an early macbook. I'd rather not worry about burning up the card. I've not stressed it, yet but my temps are much lower and I haven't received any i/o errors, yet.

      I believe I've been successful. Finishing up the rest of my network rack tonight and I'll configure and deploy it. Fingers crossed!

      1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by

        Yes, use TAB to enter the BIOS setup over serial. However everything (except the date and time?) is read-only in the standard BIOS.

        You should not need to enter the BIOS to boot from CF though.

        Steve

        1 Reply Last reply Reply Quote 0
        • S
          samtap
          last edited by

          Thanks @Fffrank and @stephenw10, it is the TAB key! Would have taken me forever to find that out by myself ;-). I know the bios is locked but it's good to know I can access it once i've flashed the unlocked/modified bios.

          1 Reply Last reply Reply Quote 0
          • I
            it.supportidata.se @t-rexky
            last edited by

            @t-rexky Hi - we decommissioned a couple of gen 2 (04/26/2010 Bios) XTM510's last year. We've been running pfSense as routers on vmWare for several years but it's always a bit of a challenge having them virtual when it comes time to shut down the environment. If I can get the XTM510's converted I'll use them instead of the VM's that have served so well for the last couple of years.

            Long story short, have succeeded in copying an install image to the 1GB CF and then installing 2.4.4 64bit to a 120MB SSD and booting to that. Interfaces are up and all seems green. Getting ready to replace the original Celeron 440's with a couple CoreDuo E5700's that I picked up off of eBay.

            Can I use the your BIOS image to update my current locked American Megatrends 080015 (Rev. 8.15) with the Core Duo E5700's?

            1 Reply Last reply Reply Quote 0
            • stephenw10S
              stephenw10 Netgate Administrator
              last edited by

              Yes you can. You would probably want to use the most recent file of his or the file I modded long ago as they don't contain DSDT speedstep data which the other do and wouldn't match your CPU.

              Steve

              I 1 Reply Last reply Reply Quote 0
              • I
                it.supportidata.se @stephenw10
                last edited by

                @stephenw10 Thanks for your reply - I assume his latest that will work for me is this?:

                t-rexky 5 months ago
                I can only imagine how many hours you spent on this! Reverse-engineering can be a lot of fun, but with a general purpose chip and so many possibilities this must have been labour of love…

                I modified the most recent version of my unlocked BIOS to implement the LED initialization to red and the adventurous can obtain the file from my dropbox:

                https://www.dropbox.com/s/o09qcz21apu4dk6/xtm515-bios1.3-unlocked1.9.led.rom.zip?dl=0

                This has been tested on one of my units and it works fine. Please note that this version does not implement any SpeedStep definitions - it is effectively the unlocked WatchGuard factory BIOS with all my other tweaks.

                1 Reply Last reply Reply Quote 0
                • stephenw10S
                  stephenw10 Netgate Administrator
                  last edited by

                  Yes, I believe that should work though I've not tested it myself.

                  I 1 Reply Last reply Reply Quote 0
                  • I
                    it.supportidata.se @stephenw10
                    last edited by

                    @stephenw10 Well, better to be safe than sorry, I have pulled down both of your images - just to verify -
                    There were a few posts several years ago that said you had to have EXACTLY the 02/03/2010 BIOS, but from what I understand from you and t-rexky your versions are ok to flash over the 04/26/2010 BIOS? Since I have spent a bit of time and a little dough shopping to get new disks, cpus and memory, I don't want to end up with nothing to put them in!

                    Thanks again for your responses and all the work you guys have put into this over the years.

                    D 1 Reply Last reply Reply Quote 0
                    • stephenw10S
                      stephenw10 Netgate Administrator
                      last edited by

                      Well you have two shots! 😉

                      But backup your existing rom file first. You can always write it back with an SPI device it you really have to.

                      Steve

                      I 1 Reply Last reply Reply Quote 0
                      • I
                        it.supportidata.se @stephenw10
                        last edited by

                        @stephenw10 Deed is done. Thanks Steve. Used your image and went smooth as silk.

                        1 Reply Last reply Reply Quote 1
                        • T
                          timveer
                          last edited by timveer

                          ** Bounty available **
                          Hello all, this may not be the mega-millions bounty, but I'll throw $20 on the table.

                          I have a Watchguard XTM 505, that was working fine with pfSense. However, like all tech idiots, I figured I'll flash the bios so that I can boot the Watchguard in terminal without having to wait, but just plug it in (console cable) start it up and watch the little characters dance on the screen :)

                          So, I flashed the bios, no problem all went fine, I rebooted into pfSense after that, again all went fine. But when I went to make changes to the bios, using putty, the highlighted item was the same color as the background (which I didn't realize at the time) and I think I changed a few settings I shouldn't have. pfSense didn't boot!!!

                          So, back into the bios and I selected "Choose preferred settings" (or something like that), F10 Save & Exit. pfSense won't boot again!!! Arrgghhhhhh!

                          So, flashing again isn't going to happen as I can't get pfSense to boot, which means I can't get out to console and, unfortunately, all I know of Linux is that they use a cool penguin for a mascot!

                          If someone can:
                          a: tell me how to reflash the bios (and I'll need a bios file)
                          or
                          b: what are the bios settings (a list of settings or screen shots) to make the dang thing work again.

                          Let me know what you need and I'll get the thing back on track. Once done, I'll shoot the $20 over on Paypal.

                          Cheers,
                          MadDogDean

                          PS: The Watchguard has the 02/03/2010 BIOS

                          Don't laugh at our speed… this was a good day!!

                          1 Reply Last reply Reply Quote 0
                          • stephenw10S
                            stephenw10 Netgate Administrator
                            last edited by

                            What BIOS image exactly did you flash to it?

                            First thing to try here is just reset the CMOS using the jumper on the board. That will give you back the default values. And that should boot pfSense. It depends on what BIOS image you put in there though.

                            All images should boot from CF, even the default BIOS, so you can try writing a Nano image to a CF card and booting that:
                            https://nyifiles.pfsense.org/mirror/downloads/pfSense-CE-2.3.5-RELEASE-2g-amd64-nanobsd.img.gz

                            Steve

                            1 Reply Last reply Reply Quote 0
                            • M
                              MadDogDean
                              last edited by MadDogDean

                              Hi Steve, the bios I flashed was from Alpha labs over at https://alpha-labs.net/2017/08/pfsense-on-watchguard/

                              I was following this thread on the forum, but with over 800 postings, it became a little overwhelming. Over at Alpha Labs, the author, Christian, did quite a thorough write-up and step by to do it.

                              The ROM is xtm5_83.rom (this is the one that seems to be floating in the ether)

                              I'll give that a try to reset the CMOS and see how that fares.

                              I already downloaded the 2.3.5 image and dropped it on a 4GB CF. That side of things should be good. I'll get to the box and work my wonders.
                              Cheers,
                              MadDogDean

                              1 Reply Last reply Reply Quote 0
                              • stephenw10S
                                stephenw10 Netgate Administrator
                                last edited by

                                Ok, that's the rom I made some year ago now (unless it was changed without renaming it).
                                So mostly that should just give you access to the settings. I'll have to double check the settings but I think 'always boot from CF' was still enabled by default. Disabling that will allow you to boot from USB to run an install. IT should boot from SATA though with the default settings.

                                Steve

                                M 1 Reply Last reply Reply Quote 0
                                • M
                                  MadDogDean @stephenw10
                                  last edited by

                                  @stephenw10 Thanks Steve, I'll check the "always boot from CF", and I'll give a go to reset the CMOS settings.

                                  I'm not at the box right now, which jumper is it?
                                  Cheers,
                                  MadDogDean

                                  1 Reply Last reply Reply Quote 0
                                  • M
                                    MadDogDean
                                    last edited by

                                    @stephenw10
                                    Steve, or any of you other brainiacs, which is the CMOS jumper?
                                    I was able to find the Lanner FW-7581 manual wherein it says the CMOS reset is J5 - ha! There is no J5 on my board. and according to the mb diagram, there should be a CMOS jumper near the CF, but on my board it's not there.
                                    Is there a CMOS reset jumper on these boards, or just "pull the battery, have a beer, come back and it'll drain and reset"?
                                    Cheers,
                                    MadDogDean

                                    1 Reply Last reply Reply Quote 0
                                    • T
                                      t-rexky
                                      last edited by

                                      @MadDogDean Yes, if you cannot find the clear CMOS jumper or contacts then the battery removal works. You can wait for a few minutes with no battery (and the unit unplugged from the mains of course), or if you are impatient you can use a conductive object to short the two battery socket contacts to discharge the circuit on the board instantly. If you are concerned about force discharging the circuit then just wait it out...

                                      M 1 Reply Last reply Reply Quote 0
                                      • M
                                        MadDogDean @t-rexky
                                        last edited by MadDogDean

                                        @t-rexky Thanks for that. Pulled the battery, had a couple beers, and now I think I better wait till tomorrow to goof with the rest ;)
                                        BTW, if it is of help, I can post the Lanner FW-7581 User Guide on Dropbox - the two mb's are almost the same, and maybe it'll help someone.
                                        Cheers,
                                        MadDogDean

                                        1 Reply Last reply Reply Quote 0
                                        • stephenw10S
                                          stephenw10 Netgate Administrator
                                          last edited by

                                          Don't drink and firewall! 😉

                                          M 1 Reply Last reply Reply Quote 0
                                          • M
                                            MadDogDean @stephenw10
                                            last edited by

                                            @stephenw10 @t-rexky
                                            Well I'll be a monkey's uncle. 4 hours, 6 beers later, reinstalled the battery and booted straight into pfSense. Tada!!! Enough screwing with the BIOS! Lets get down to business - yeehaa!

                                            If you guys want to DM with your Paypal address, I'll split the Bounty.

                                            Now my next adventure is to scour the forum and figure out how to do a multi-wan, when your ISP delivers both channels using the same Gateway. Any suggestions for good, cheap NAT routers would be good.

                                            Or, if anyone has experience with the Cisco Catalyst 2960 (24 P0ort POE switch) - is it possible to set up a couple ports as a NAT to send to the pfSense in order to fool it into multi-wan to use these 2 same Gateway's channels.

                                            Our ISP is part of a duopoly and both are equally as crappy as the other - but what other choice is there...

                                            Cheers,
                                            MadDogDean

                                            F 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post