NEW Package: freeRADIUS 2.x

red2006

ive managed to restore my pfsense configuration from the moment ive configured the CP+freeradius
and its working fine now(slow process no more)

i dont know what rily happened.

and i reuploaded all of my users again.

i now have a very minimal config on my CP and free radius just for the bug testing again of pfsense+CP+freeRadius

i limited the bandwidth per user on CP, so all of the users added on freeradius would have same bandwidth restrictions
and session limit is set on freeradius and everybody on the users tab have the same session limit.

i tested to have a different bandwidth allocation on freeradius acct entry but the users authentication replied accept-reject. i dont know why this happens but i when i emptied the bandwidth limit on the user entry on free radius, the user authentication succeeded… i dont know what the problem on that.

also all of my users have now an unlimited access on the internet but with a hard time out of 1 hour, i will not set anything first on the user max daily time limit until i got some answers or further testing on the max daily usage per user.

i currently have 160 users on the users tab and i dont think i want to reenter them again if i misconfigured again the user max daily time.

ill try to look for ways on how to reset or clear the cache of users max daily time usage coz on my last testing even if the user maxed out of his time per day, he cannot realy login/reauthenticated the next day or any succeeding days, meaning that CP is not really resetting its time/counter/cache on any basis, even if i reconfigure the user to another max daily time usage. The only solution is to rename the username. Thats the only solution to really have a fresh or counter reset on the users account.

thanks alot Nachtfalke.

hope to have a solution on atleast on the max daily usage of the users soon... thanks alot.

another one.

is this possible?
to have the logs or table of user account login or time usage of users from the moment the account was created.
to have it printed or shown on the webGUI?

thanks.
i need that report for my network monitoring blabla... :-)

thanks again... youve been realy a big help on my part.

Nachtfalke

Hi,

I think the problem is CaptivePortal which isn't doing accounting the correct way. Perhaps you should go the same way using redmine.pfsense.org like I wrote here:
http://forum.pfsense.org/index.php/topic,52324.msg300182.html#new

For getting more information when a user is logged on you can enable logging on freeradius2 GUI –> Settings.
Then you could extend the output when someone with wrong or correct username/password authenticates. Take a look at the following link:
http://doc.pfsense.org/index.php/FreeRADIUS_2.x_package#Syslog:_Expand_the_logging_output_to_your_needs

You could try with:


Remaining time in seconds: %{reply:Session-Timeout}

As far as I know freeradius sends back "Sessio9n-Timeout" as attribute in a reply message. You can fill in other attributes - you just have to find out their name and if the appear in a request or a reply and so on :-)

Good luck and thank you for your help!

shell

Suddenly my radius stopped working. Without any message or any error. Starting the service manually gives the following error message:

gdbm fatal: read error

Backup, Restore, fresh install of the package…. no success. Now i'm totally confused ???

Nachtfalke

Please start freeradius from console in debug mode. type:

radiusd -X

and the post the complete output. I am sure the error is somewhere else.

shell

Here is the output:

http://paste.pcspinnt.de/pastebin.php?show=m72943fe0

May be it's a bug. I'm using the newest freeradius2 package (Beta 1.1.8 pkg v1.0.5 platform: 2.0)

Nachtfalke

@shell:

Here is the output:

http://paste.pcspinnt.de/pastebin.php?show=m72943fe0

May be it's a bug. I'm using the newest freeradius2 package (Beta 1.1.8 pkg v1.0.5 platform: 2.0)

You mixed up things. there are two different freeradius packages.
freeradius and freeradius2. They are both not compatible. Which version do you use and which version do you want to use ?

This is the thread for freeradius2 package.

shell

Sorry, wrong paste. Now the right one:

RC1
2.1.12_1 pkg v1.6.6_4
platform: 2.0

Nachtfalke

Ok, no problem.

In checked your radiusd -X output and could not found a problem.

I checked the installed packages on my system with

pkg_info

and I found

gdbm-1.9.1

Make sure that you have this on your pfsense - I am not absolutly sure but I think this comes with pfsense by default.

You can try to add it with:
amd64


pkg_add -r http://files.pfsense.org/packages/amd64/8/All/gdbm-1.9.1.tbz

i386:


pkg_add -r http://files.pfsense.org/packages/8/All/gdbm-1.9.1.tbz

shell

Ui, i've an older version:

gdbm-1.8.3_3 The GNU database manager

Will install the new one. May be this works.

EDIT:

pkg_delete gdbm-1.8.3_3

pkg_delete: file '/usr/local/man/man3/gdbm.3.gz' doesn't exist
pkg_delete: file '/usr/local/include/gdbm.h' doesn't exist
pkg_delete: file '/usr/local/lib/libgdbm.a' doesn't exist
pkg_delete: file '/usr/local/lib/libgdbm.la' doesn't exist
pkg_delete: file '/usr/local/lib/libgdbm.so' doesn't exist
pkg_delete: file '/usr/local/info/gdbm.info' doesn't exist
pkg_delete: couldn't entirely delete package (perhaps the packing list is
incorrectly specified?)

EDIT2:

@#$! >:(

Same error:

gdbm fatal: read error

Nachtfalke

Don't know why.

Can you reinstall pfsense - backup the config before you do that.

shell

No, can't do that. It's big machine with several interfaces and many active VPN connections. No further idea?

EDIT:

Ok, i think i found a bug. Did a few test and commented out some lines. Now, i can start the radiusd.

Here is what i commented out.

@radiusd.conf:

…
instantiate {

exec
expr
#daily
#weekly
#monthly
#forever
expiration
logintime
### Dis-/Enable sql instatiate
#sql
}
…

@sites-available/default:

…
# The ldap module will set Auth-Type to LDAP if it has not
# already been set

### ldap ###

#
# Enforce daily limits on time spent logged in.
#daily
#weekly
#monthly
#forever

#
# Use the checkval module
…
accounting {
#
# Create a 'detail'ed log of the packets.
# Note that accounting requests which are proxied
# are also logged in the detail file.
detail
#daily
#weekly
#monthly
#forever
…

Further informations will follow.

EDIT2:

Ok, looks like a big bug. Copied my old configuration and commented out this lines. Now everything works. Can anybody explain me these settings?

shell

I've written to patches for these files:

--- /usr/local/etc/raddb/sites-available/default        2012-12-12 07:50:48.000000000 +0100
+++ default     2012-12-12 07:39:34.000000000 +0100
@@ -197,10 +197,10 @@

        #
        #  Enforce daily limits on time spent logged in.[color][/color]
-       daily
-       weekly
-       monthly
-       forever
+       #daily
+       #weekly
+       #monthly
+       #forever

        #
        # Use the checkval module
@@ -400,10 +400,10 @@
        #  Note that accounting requests which are proxied
        #  are also logged in the detail file.
        detail
-       daily
-       weekly
-       monthly
-       forever
+       #daily
+       #weekly
+       #monthly
+       #forever

        ### This makes it possible to run the datacounter_acct module only on accounting-stop and interim-updates
        if ((request:Acct-Status-Type == Stop) || (request:Acct-Status-Type == Interim-Update)) {

--- /usr/local/etc/raddb/radiusd.conf   2012-12-12 07:49:27.000000000 +0100
+++ radiusd.conf        2012-12-12 07:38:03.000000000 +0100
@@ -87,10 +87,10 @@

        exec
        expr
-       daily
-       weekly
-       monthly
-       forever
+       #daily
+       #weekly
+       #monthly
+       #forever
        expiration
        logintime
        ### Dis-/Enable sql instatiate

These two patches are applied via crontab every night. I know this is just a workaround.

Nachtfalke

It's not a bug. You have a missing config file on your system.
You should have a file called "counter" here:

usr/local/etc/raddb/modules/

This is for granting time based access.
The function on freeradius.inc is called:

freeradius_modulescounter_resync()

You will find it on line 2611.

And the initial configuration on line 112 and the following.

shell

Ah ok, i remember this file. But it's there:

-rw-r-----  1 root  wheel   3.6K Dec  7 13:27 /usr/local/etc/raddb/modules/counter

Here it is: http://paste.pcspinnt.de/pastebin.php?show=m64f35679

Nachtfalke

@shell:

Ah ok, i remember this file. But it's there:
-rw-r-----  1 root  wheel   3.6K Dec  7 13:27 /usr/local/etc/raddb/modules/counter
Here it is: http://paste.pcspinnt.de/pastebin.php?show=m64f35679

Ok, then the problem isn't freeradius but some missing files on your pfsense. missing packages like gdbm or something else.
That's why I said - backup the pfsense config, reinstall pfsense and restore config. this will reinstall all packages and restore all config.

If this isn't the way you want to go - then you can modify the freeradius.inc file and uncomment the lines you posted.
Uncomment them on line 349 and 1596. Then you do not need any cron script.

bdani

Hi there!

Has anyone ever tried to set MikroTik RADIUS authentication?
I want to auth my AP-s from PF freeradius2.

With freeradius is working, but I cannot set bandwith limits… :(
With freeradius2 isn't communicating... :(

any ideas? :)

Thanks in advance... :(

Nachtfalke

@bdani:

Hi there!

Has anyone ever tried to set MikroTik RADIUS authentication?
I want to auth my AP-s from PF freeradius2.

With freeradius is working, but I cannot set bandwith limits… :(
With freeradius2 isn't communicating... :(

any ideas? :)

Thanks in advance... :(

Select an interface for authentication or set "*" for any interface.
on "client/NAS" set the IP address of the mikrotik AP and the correct password.
On Mikrotik set as RADIUS IP the IP of the listening interface and the correct/same password as on "Clients/NAS".

Enable logging on freeradius2 to see what is happening on syslog.

bdani

@Nachtfalke:

@bdani:

Hi there!

Has anyone ever tried to set MikroTik RADIUS authentication?
I want to auth my AP-s from PF freeradius2.

With freeradius is working, but I cannot set bandwith limits… :(
With freeradius2 isn't communicating... :(

any ideas? :)

Thanks in advance... :(

Select an interface for authentication or set "*" for any interface.
on "client/NAS" set the IP address of the mikrotik AP and the correct password.
On Mikrotik set as RADIUS IP the IP of the listening interface and the correct/same password as on "Clients/NAS".

Enable logging on freeradius2 to see what is happening on syslog.

hmmm…

Status: Services
radiusd FreeRADIUS Server Stopped

But I do not know why.... ???

I've checkd the log (all of /var/log) but nothing find why...

MikroTik log say:
timeot...

Now I know why :-)

Where can I see why can't start service?

Nachtfalke

@bdani:

(…)
Where can I see why can't start service?

Go to pfsense console and run freeradius in debug mode. You can do this with that command:

radiusd -X

The output will tell you what is missing/going wrong. If you have questions then please post the complete output you got.

WinstonSmith

@myke:

@Nachtfalke:

In general you should create your CA ander server cert on pfsene Cert Manager.
then select these two certificates on freeradius -> EAP and save.

Client certificates can be build on pfsense Cert Manager and export the .p12 file. This should work and the .p12 file should be without any password. can you try with an empty password ? But this is more a "pfsense" problem than a freeradius problem.

I am not sure but if I remember correct there was another thread here in the forum which is about the .p12 file and a password. Perhaps the search function can help you.

Thanks for the answer.

My Certificate Authority and certificate was created in pfsense Cert manager. I just created .pfx with openssl.
In first time i try with an empty password and second time with a password "pfsense" but exactly the same result.

I use pfsense 2.0.1 AMD release.

Myke.

Did anyone get this working? I came across this relatively fresh posting because I ran into the same problem (didn't I? Maybe someone spots a difference below)

_I created a root-CA and a CA in pfSense cert-manager and created a server-cert and client-cert for EAP-TLS only. In Services->FreeRadius->EAP->CERTIFICATES FOR TLS I choose the CA, server-cert and client-cert. I checked "Create client.p12 for export" and saved.

When I download the .p12 file from /usr/local/etc/raddb/certs/client_cert.p12 or using the cert-manager I get asked for a password when trying to install them on OSX or iOS …_

Thanks a lot!!
Sascha