LAN -> WAN Problem

straike

Hello

I am a newbie and I have a big problem.
I would like redirect my LAN to my WAN in order to go on Internet. I made a success of thanks to bridge (LAN on WAN).

But I wouldn't like use a bridge. In fact, I only want a router from LAN to WAN.
I've so tried everything : static route, disable the firewall..

I have currently:

LAN :
DHCP Server : 192.168.1.X
Gateway : 192.168.1.1
Mask : 255.255.255.0

WAN (obtained by DHCP) :
IP : 192.168.0.10
Gateway : 192.168.0.254
Mask : 255.255.255.0
Dns : 212.27.54.252

I think I must use static route but it doesn't work.

Thanks for your help. :)

jeroen234

give the wan a static ip adress with out a gateway
so that nat is disabled
then set up a static route to where you lan trafic has to go

straike

Thanks for your answer but it doesn't work. :'(

In fact, Pfsense says me that I must give it a gateway in WAN.

I give you some adjustement of my config :

Interfaces -> WAN
IP address : 192.168.0.10
Gateway : 192.168.0.254 (I'm obliged)
FTP Helper -> unchecked
Block private networks -> unchecked
Block bogon networks -> unchecked

Interfaces -> LAN
IP address : 192.168.1.1
Gateway : 192.168.1.1
FTP Helper -> unchecked

System -> Advanced functions
Shared Physical Network -> unchecked
Filtering Bridge -> unchecked
Static route filtering -> unchecked
Disable Firewall -> checked (I would like ever test without firewall problems ! ;))
Disable NAT Reflection -> unchecked

System -> Static Routes
Interface Network Gateway
LAN 192.168.0.0/24 192.168.0.254

Thanks for your help !

straike

I have formatted my configuration and now it's working !
Thanks