Dansguardian package for 2.0
-
start topic on documentation
http://forum.pfsense.org/index.php/topic,42664.msg220385.html#msg220385Ok, So lets start.
Compiling in 8.1 with no args results on working instalation on pfsense.
I will try it on 64 bits
-
amd64 package to dansguardian 2.10 stable version download link
Important note about dansguardian:
DansGuardian 2 is:-
licensed under the GPL version 2 with permission to link to OpenSSL
-
Open Source
-
Free Software where 'Free' means Freedom
-
freely (no cost) downloadable from this site for non-commercial use
-
freely (no cost) downloadable from this site for general purpose unix distributions like FreeBSD, Debian, Fedora, Ubuntu, etc
-
not freely downloadable from this site for installation by 3rd parties charging for installation or support
-
not freely downloadable from this site for commercial use
-
a registered trade mark of Daniel Barron
-
copyright Daniel Barron
So, if you want dansguardian for comercial use, buy a licence since you start using it.
-
-
So, if you want dansguardian for comercial use, buy a licence since you start using it.
To better understand the license and distribution of access DansGuardian: http://dansguardian.org/?page=copyright2
[]'s
Jack -
Here are some notes about my freeBSD installation that I got dansguardian from:
I installed it in VirtualBox. Before I installed either squid or dansguardian, I installed the virtual box "helper" package that is optionally included in the freeBSD installation. (you choose to add a bunch of packages during the install process and then actually unpack the packages as needed later) During the install process for the helper package, it downloaded dozens of other dependency packages. Some of these may have been needed for the squid and dansguardian installations. Neither dansguardian or squid required that I install any other dependencies before they worked.
running```
find / dansguardianThe dansguardian version I used was 2.12.0.0 alpha 32 bit. I think it's safe to assume that the stable 2.10 version would work the same. I don't think the 64 bit version should have any problems either. -
If you use freebsd ports, after compiling dansguardian stable version, you can do a make package to build a package instalation file.
That's what i did in x64 version.
Just install squid package and then
pkg_add -r https://github.com/downloads/marcelloc/pfsense-packages/dansguardian-2.10.1.1_1.amd64.tbz
-
64bits pfsense binary package to dansguardian 2.10 stable version download link
32bits pfsense binary package to dansguardian 2.10 stable version download link
Important note about dansguardian:
DansGuardian 2 is:-
licensed under the GPL version 2 with permission to link to OpenSSL
-
Open Source
-
Free Software where 'Free' means Freedom
-
freely (no cost) downloadable from this site for non-commercial use
-
freely (no cost) downloadable from this site for general purpose unix distributions like FreeBSD, Debian, Fedora, Ubuntu, etc
-
not freely downloadable from this site for installation by 3rd parties charging for installation or support
-
not freely downloadable from this site for commercial use
-
a registered trade mark of Daniel Barron
-
copyright Daniel Barron
So, if you want dansguardian for comercial use, buy a licence since you start using it.
To understand DansGuardian license and distribution take a look on http://dansguardian.org/?page=copyright2
-
-
Show of ball marcello … Congratulations again for the work!
I made sure to add a blog post in our reporting "good news": http://www.pfsense-br.org/blog/2011/12/dansguardian-2-10-1-1-no-pfsense-2-0/
Do you have plans to develop a management interface for the GUI?
[]'s
Jack -
Do you have plans to develop a management interface for the GUI?
Yes, but just after finishing mailscanner package gui.
-
Yes, but just after finishing mailscanner package gui.
All right marcelloc!
one thing at a time! ;-)
[]'s
Jack -
-
marcelloc, as always nice work! I see you're already adding files to the github… Can't wait to test the package out when its ready for beta testing. Question, since squid is a requirement; will the package state that squid needs to be installed first? I ask because I've been using squid3 and when I added squidguard it removed the binaries for squid3 and replaced them with squid2.. No biggy since I was able to rectify from the cmdline. But other users may not be so lucky.
something to think of
-
Hi cino, good to see that this package will be usefull for pfsense.
I can publish this package without forcing a specific version of squid.
If dansguardian do not find it's dependencies, then pkg_add will look for 2.x squid version.
One think that I observed is that all good stuff from squid is in squidguard so I think that this first version will be able to replace havp portion of proxy solution as many people use time and group acls.
The result will be something like
dansguardian -> squid -> squidguard
or
squid -> squidguard -> dansguardian
I was planning to finish dansguardian.inc this week but mailscanner initialization was buggy and starting endless processes and killing machine resources. It's fixed now but I need to monitor it to be 100% sure it's fixed.
-
It makes sense to me that dansguardian would be closest to the WAN so that it filters things once, then they are cached by squid. Later requests would be serviced by squid without having to be filtered by dansguardian again. This will be faster.
If squid is closest to the WAN and a browser request goes to dansguardian first, then dans will re-filter every request for the same page, even though it is simply coming from the local squid cache. This will be slower.
About squidguard, why do we need squidguard? Doesn't dansguardian support blacklists also? Or does squidguard provide functionality that dansguardian does not?
Finally, thank you VERY VERY much for doing this.
–Ray
-
About squidguard, why do we need squidguard? Doesn't dansguardian support blacklists also? Or does squidguard provide functionality that dansguardian does not?
Squidguard is very well implemented in pfsense and also has timegroup lists.
Blacklists are implemented to dansguardian as well content filtering.
If I do not find a way to do time groups in dansguardian(or in squid) as squidguard does we will still need it.
Current status is still under devel(80% done).
This is the most complex packages I ever every worked on, I hope it get usefull for everybody.Donations are always welcome ;D
-
Current status
What is already done:
-
Package gui can start and stop dansguardian 2.12 daemon
-
dansguardian.conf 100% build via gui
-
filtergroupsfiles (since version 2.8 dansguardian accepts up to 99 groups)
-
userlist and group association tab
-
clamav integration
-
Blacklists categories association in groups
What is under devel:
-
Blacklist downloads
-
test ssl filtering support available on 2.12
-
Integration with squid/squidguard
Dansguardian has almost 40 config files. I had no idea of that when I started writing this package :P
-
-
@marcelloc i see you published the package today. I haven't installed it yet since I have a question. I looked at the deps and I knew squid could be an issue. I'm running squid3 on my box for ipv6. Do you see an issue if I try to install the package? I have no problem manually fixing it on my box if needed… good example was when i install squid-guard, it uninstall squid3 in-place of squid2... so i manually uninstalled squid2 and put squid3 back in... after that, life was good.
-
I do not force squid install, so if you have version 3, it probably do not install version 2.x.
I'm also checking some first issues from my devel machine to a clean vm.
-
Hello marcelloc i installed dansguardian on my pfsense (IPv6) 2.1-DEVELOPMENT (amd64). It seemed to install correctly, no errors in the installer that I noticed, but the service won't start.
In the system log (UI) i see this:
php: /pkg_edit.php: The command 'chown -R nobody:nobody /usr/loca/etc/dansguardian' returned exit code '1', the output was 'chown: /usr/loca/etc/dansguardian: No such file or directory'
note the path: /usr/loca/etc/dansguardian
I checked /usr/local/etc/dansguardian and it does exist and has lots of files so this may just be a typo somewhere?
I ran this command to look for "/usr/loca/":
grep -r "/usr/loca/" /usr/local/*
/usr/local/pkg/dansguardian.inc: mwexec("chown -R $daemonuser:$daemongroup /usr/loca/etc/dansguardian");I also see this error in the system log:
php: /pkg_edit.php: The command '/usr/local/etc/rc.d/dansguardian stop' returned exit code '127', the output was '/usr/local/etc/rc.d/dansguardian: not found'I looked in the file system for /usr/local/etc/rc.d/dansguardian and it doesn't exist there.
Below is everything in /var/log/system.log relating to dansguardian:
Jan 27 12:22:04 pfs php: /pkg_mgr_install.php: Beginning package installation for Dansguardian .
Jan 27 12:22:04 pfs check_reload_status: Syncing firewall
Jan 27 12:22:09 pfs php: /pkg_mgr_install.php: The command 'chown -R nobody:nobody /usr/loca/etc/dansguardian' returned exit code '1', the output was 'chown: /usr/loca/etc/dansguardian: No such file or directory'
Jan 27 12:22:09 pfs php: /pkg_mgr_install.php: The command 'chown -R nobody:nobody /var/log/dansguardian' returned exit code '1', the output was 'chown: /var/log/dansguardian: No such file or directory'
Jan 27 12:22:09 pfs php: /pkg_mgr_install.php: The command '/usr/local/etc/rc.d/dansguardian stop' returned exit code '127', the output was '/usr/local/etc/rc.d/dansguardian: not found'
Jan 27 12:22:10 pfs php: /pkg_mgr_install.php: The command 'chown -R nobody:nobody /usr/loca/etc/dansguardian' returned exit code '1', the output was 'chown: /usr/loca/etc/dansguardian: No such file or directory'
Jan 27 12:22:10 pfs php: /pkg_mgr_install.php: The command '/usr/local/etc/rc.d/dansguardian stop' returned exit code '127', the output was '/usr/local/etc/rc.d/dansguardian: not found'
Jan 27 12:22:10 pfs check_reload_status: Reloading filter
Jan 27 12:24:09 pfs check_reload_status: Syncing firewall
Jan 27 12:24:09 pfs check_reload_status: Syncing firewall
Jan 27 12:24:09 pfs php: /pkg_edit.php: The command 'chown -R nobody:nobody /usr/loca/etc/dansguardian' returned exit code '1', the output was 'chown: /usr/loca/etc/dansguardian: No such file or directory'
Jan 27 12:24:09 pfs php: /pkg_edit.php: The command '/usr/local/etc/rc.d/dansguardian stop' returned exit code '127', the output was '/usr/local/etc/rc.d/dansguardian: not found'
Jan 27 12:27:40 pfs check_reload_status: Syncing firewall
Jan 27 12:27:40 pfs check_reload_status: Syncing firewall
Jan 27 12:27:40 pfs php: /pkg_edit.php: The command 'chown -R nobody:nobody /usr/loca/etc/dansguardian' returned exit code '1', the output was 'chown: /usr/loca/etc/dansguardian: No such file or directory'
Jan 27 12:27:40 pfs php: /pkg_edit.php: The command '/usr/local/etc/rc.d/dansguardian stop' returned exit code '127', the output was '/usr/local/etc/rc.d/dansguardian: not found'
Jan 27 12:28:50 pfs check_reload_status: Syncing firewall
Jan 27 12:28:50 pfs check_reload_status: Syncing firewall
Jan 27 12:28:50 pfs php: /pkg_edit.php: The command 'chown -R nobody:nobody /usr/loca/etc/dansguardian' returned exit code '1', the output was 'chown: /usr/loca/etc/dansguardian: No such file or directory'
Jan 27 12:28:50 pfs php: /pkg_edit.php: The command '/usr/local/etc/rc.d/dansguardian stop' returned exit code '127', the output was '/usr/local/etc/rc.d/dansguardian: not found'Thanks for your help!
-
Thanks for the feedback, there is a missing "l" on path.
I'm sitll looking for other issues, until commit the patches.
-
Just published some fixes and changed version to 0.1.1
features not finished yet:
-
blacklist update frequency
-
ssl man in the middle feature
-
