Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    LCDProc 0.5.4-dev

    Scheduled Pinned Locked Moved
    pfSense Packages
    68
    587
    528.4k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • stephenw10S
      stephenw10 Netgate Administrator
      last edited by

      Could you show us your system logs?
      I suspect you are seeing the same as me. Is that on your X-Core box?

      Steve

      1 Reply Last reply Reply Quote 0
      • M
        mdima
        last edited by

        @m4f1050:

        I tried this LCDProc 0.5.4-dev and all it does is flash a few screens real fast then it says "Thank you for using pfSense" and sits on that screen forever…  :O

        Hi m4f,
          Did you set all the new properties in the service configuration?
        Can you tell me what values did you enter?

        Thanks,
          Michele

        1 Reply Last reply Reply Quote 0
        • M
          m4f1050
          last edited by

          Steve: Yes, it's on the X500 (I also have an X700 but they are the same hardware)

          Hrm!   I had uninstalled it, when I installed it again it installed 0.5.5 v 0.8   :O

          Here are my settings:

          Under Server tab:
          Enable LCDProc: checked
          Com Port: Parallel port 1 (/dev/lpt0)
          Display Size: 2 rows 20 columns
          Driver: Watchguard Firebox with SDEC (x86 only)
          Refresh frequency: 5 seconds
          The rest are set Default and the LED option is disabled

          Under Screens tab I have enabled:
          Version, Time, Uptime, System, Disk, Load, States,
          Load Balancer, Interfaces, CPU Freq and Internet Traffic

          1 Reply Last reply Reply Quote 0
          • M
            m4f1050
            last edited by

            I get these on boot, but after it boots my LCD works with this newer version.

             Last 50 system log entries

Jan 20 22:05:37 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:05:37 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:05:25 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:05:25 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:05:13 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:05:13 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:05:02 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:05:02 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:05:01 php: : Hotplug event detected for opt2 but ignoring since interface is configured with static IP ()

Jan 20 22:05:01 php: : Hotplug event detected for opt4 but ignoring since interface is configured with static IP ()

Jan 20 22:05:01 php: : Hotplug event detected for opt1 but ignoring since interface is configured with static IP ()

Jan 20 22:05:01 php: : Hotplug event detected for opt3 but ignoring since interface is configured with static IP ()

Jan 20 22:04:54 check_reload_status: Linkup starting re5

Jan 20 22:04:54 check_reload_status: Linkup starting re4

Jan 20 22:04:54 check_reload_status: Linkup starting re3

Jan 20 22:04:54 kernel: re5: link state changed to DOWN

Jan 20 22:04:54 kernel: re4: link state changed to DOWN

Jan 20 22:04:54 kernel: re3: link state changed to DOWN

Jan 20 22:04:54 kernel: re2: link state changed to DOWN

Jan 20 22:04:54 check_reload_status: Linkup starting re2

Jan 20 22:04:50 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:04:50 sshlockout[17089]: sshlockout/webConfigurator v3.0 starting up

Jan 20 22:04:50 php: /index.php: Successful webConfigurator login for user 'admin' from 192.168.2.1

Jan 20 22:04:50 php: /index.php: Successful webConfigurator login for user 'admin' from 192.168.2.1

Jan 20 22:04:50 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:04:39 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:04:38 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:04:27 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:04:27 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:04:16 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:04:15 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:04:05 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:04:04 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:03:53 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:03:53 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:03:42 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:03:41 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:03:30 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:03:30 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:03:19 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:03:18 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:03:07 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:03:07 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:02:56 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:02:55 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:02:45 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:02:44 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:02:33 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:02:33 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

Jan 20 22:02:32 apinger: /usr/local/bin/rrdtool respawning too fast, waiting 300s.

            EDIT:

            I removed everything except SYSTEM TIME and SYSTEM STATS, good enough for me  :)

            1 Reply Last reply Reply Quote 0
            • M
              mdima
              last edited by

              Steve,
                can you pls tell me which are your options/screen?

              Thanks,
              Michele

              1 Reply Last reply Reply Quote 0
              • stephenw10S
                stephenw10 Netgate Administrator
                last edited by

                I'm running the Time and Uptime screens. Both boxes.

                Steve

                1 Reply Last reply Reply Quote 0
                • M
                  mdima
                  last edited by

                  @stephenw10:

                  I'm running the Time and Uptime screens. Both boxes.

                  Steve

                  mmmhhh… I am trying to mess it up as much as I can, but really, after every try I only get 1 server and 1 client running (also with enable/disable of ipsec that foces a package resync)... with:
                  Refresh: 1 second
                  Driver: sureelec
                  Screens: ALL

                  I don't even find the problem on the stats and time screens, both from a machine running since 31 days or a machine just booted...

                  Anyway, I will change the package in order to let the client make only 3 attempts to connect to the service then quit...

                  1 Reply Last reply Reply Quote 0
                  • stephenw10S
                    stephenw10 Netgate Administrator
                    last edited by

                    I appreciate all your efforts, thanks.  :)

                    It's looking like a driver issue is more likely then.
                    There seem to be two issues here:
                    1. When the package is started/restarted in quick succession some delay in the process can result in LCDd trying to start before the previous version has stopped. Or possibly the previous version simply does not stop as I have found when trying to kill it manually.

                    2. The LCDd process can start to use a lot of CPU time causing the box to become unresponsive (but still routes traffic OK).

                    For testing purposes we can either:
                    Build the old driver against 0.55 or
                    Swap out LCDd with a 0.54 version and equivalent driver.

                    What do think? I may have 0.54 version files the fmertz mailed to me. I'll try that if I do.

                    Steve

                    1 Reply Last reply Reply Quote 0
                    • F
                      fmertz
                      last edited by

                      @stephenw10:

                      looking like a driver issue is more likely then.

                      Well, a driver is a shared library. It is coded so there is just one copy of the code between multiple instances of LCDd server. For instance data, everything is dynamically allocated, so each instance behaves independently. Obviously, as there is just one set of interface ports, and one LCD, this flexibility is not necessarily helping. I think fixing the multiple instances of the server will go a long way towards fixing these problems. I can look at the code again to see if I can fail initialization on second instance and up. Let me know if I can help compiling anything.

                      1 Reply Last reply Reply Quote 0
                      • T
                        tix
                        last edited by

                        @stephenw10:

                        2. The LCDd process can start to use a lot of CPU time causing the box to become unresponsive (but still routes traffic OK).

                        I have just acquired an x700 from work and trying to get it running smoothly and am encountering this problem.  It is a clean full install (on HDD) of 2.0.1 with IPv6 git sync'd as of 21 Jan.
                        I keep running into this within 16-24 hours uptime where the system is non-responsive but still routes although more slowly than normal.  I cannot SSH use the webif, or console when this happens.  The RRD graphs stop as well.  I have only the load and states screens enabled thinking maybe the number of screens was an issue, but today when it became unresponsive it was stuck on the load screen and the current load was displayed as a 24.4!!!

                        I am also of the (pretty much worthless) opinion that it is too many instances of the LCDProc client as I can see the log entries posted above.  I am going to disable LCDProc-dev for now and see if everything stays stable for at least 24 hours.

                        1 Reply Last reply Reply Quote 0
                        • marcellocM
                          marcelloc
                          last edited by

                          Also check states table size and usage on Dashboard.

                          Treinamentos de Elite: http://sys-squad.com

                          Help a community developer! ;D

                          1 Reply Last reply Reply Quote 0
                          • stephenw10S
                            stephenw10 Netgate Administrator
                            last edited by

                            @tix:

                            I am going to disable LCDProc-dev for now and see if everything stays stable for at least 24 hours.

                            The more people running this and giving feedback the faster it's likely to be solved. So thanks.  :)
                            If you are running it again try to SSH in. After you enter the password it appears to have frozen but if you wait long enough it will log in (several minutes). Then you can see what's running. E.g.

                            
[2.0.1-RELEASE][root@pfsense.fire.box]/root(4): ps aux | grep lcd
root   16576  0.0  0.3  3656  1508  ??  S    10:59PM   0:00.00 /bin/sh /tmp/lcdclient.sh
root   16628  0.0  3.4 47452 17388  ??  S    10:59PM   0:00.31 /usr/local/bin/php -f /usr/local/pkg/lcdproc_client.php
[2.0.1-RELEASE][root@pfsense.fire.box]/root(5): ps aux | grep LCD
nobody 16562  0.0  0.3  3368  1464  ??  Ss   10:59PM   0:00.02 /usr/local/sbin/LCDd -c /usr/local/etc/LCDd.conf

                            You should see one instance of each of those three programs running. If you have more then it has started or stopped incorrectly.

                            You can also run```
                            top -SH

                            LCDd should be consuming 1% or less cpu.

Steve
                            1 Reply Last reply Reply Quote 0
                            • M
                              m4f1050
                              last edited by

                              Here is my recent log of LCDproc after a fresh reboot of my Firebox, right now I have System Time and System Stats working.

                              EDIT:  I had my WAN cable unplugged.  I replaced my X500 with my X700 while I did this…

                              
Jan 22 20:37:22 LCDd: Connect from host 127.0.0.1:21770 on socket 13
Jan 22 20:37:22 LCDd: Connect from host 127.0.0.1:34709 on socket 12
Jan 22 20:37:20 LCDd: Listening for queries on 127.0.0.1:13666
Jan 22 20:37:20 LCDd: Using Configuration File: /usr/local/etc/LCDd.conf
Jan 22 20:37:20 LCDd: LCDd version 0.5.5 starting
Jan 22 20:37:17 php: lcdproc: Sync: End package sync
Jan 22 20:37:17 php: lcdproc: Sync: Begin package sync
Jan 22 20:37:17 php: lcdproc: Sync: End package sync
Jan 22 20:37:17 php: lcdproc: Sync: Begin package sync
Jan 22 20:37:17 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)
Jan 22 20:37:17 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)
Jan 22 20:37:17 php: : Restarting/Starting all packages.
Jan 22 20:37:11 check_reload_status: Starting packages
Jan 22 20:37:11 php: : pfSense package system has detected an ip change 0.0.0.0 -> ... Restarting packages.
Jan 22 20:37:11 php: : OpenNTPD is starting up.
Jan 22 20:37:05 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)
Jan 22 20:37:05 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)
Jan 22 20:36:57 php: : ERROR! PPTP enabled but could not resolve the $pptpdtarget
Jan 22 20:36:56 php: : The command '/usr/bin/killall 'ntpd'' returned exit code '1', the output was 'killall: warning: kill -TERM 59839: No such process'
Jan 22 20:36:56 php: : Creating rrd update script
Jan 22 20:36:56 php: : Resyncing OpenVPN instances for interface LAN.
Jan 22 20:36:54 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)
Jan 22 20:36:54 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)
                              1 Reply Last reply Reply Quote 0
                              • T
                                tix
                                last edited by

                                @stephenw10:

                                The more people running this and giving feedback the faster it's likely to be solved. So thanks.  :)
                                If you are running it again try to SSH in. After you enter the password it appears to have frozen but if you wait long enough it will log in (several minutes). Then you can see what's running. E.g.

                                You should see one instance of each of those three programs running. If you have more then it has started or stopped incorrectly.

                                You can also run```
                                top -SH

                                LCDd should be consuming 1% or less cpu.

Steve

                                Thanks Steve but I've tried that and even after more than an hour I still cannot get the menu so I usually give up and do a power-cycle as that is the only way I've found to recover.
                                I would love to be able to confirm if there are multiple instances as well as memory usage and such but so far that is not an option.

                                I forgot to mention previously that someone had suggested that when the connection drops that all the packages are restarted so I disabled the gateway monitor but that made no difference.

                                The next time I get to watch it for a full day (next weekend?), I will keep an SSH session up running top and hopefully capture some useful information.

                                EDIT:
                                One more thing:  The looking at the RRD graphs (processor, memory, & states), there is nothing indicating an increase in processes or utilization.  Everything is "normal" and then just stops graphing until I reboot.

                                1 Reply Last reply Reply Quote 0
                                • M
                                  m4f1050
                                  last edited by

                                  Here is the X700's System Log pertaining LCDproc 0.5.5 v0.8

                                  
Jan 22 22:26:33 LCDd: Connect from host 127.0.0.1:42443 on socket 13
Jan 22 22:26:31 LCDd: Connect from host 127.0.0.1:61742 on socket 12
Jan 22 22:26:29 LCDd: Listening for queries on 127.0.0.1:13666
Jan 22 22:26:29 LCDd: Using Configuration File: /usr/local/etc/LCDd.conf
Jan 22 22:26:29 LCDd: LCDd version 0.5.5 starting
Jan 22 22:26:26 php: lcdproc: Sync: End package sync
Jan 22 22:26:26 php: lcdproc: Sync: Begin package sync
Jan 22 22:26:26 php: lcdproc: Sync: End package sync
Jan 22 22:26:26 php: lcdproc: Sync: Begin package sync
Jan 22 22:26:26 php: : Restarting/Starting all packages.
Jan 22 22:26:21 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)
Jan 22 22:26:20 check_reload_status: Starting packages
Jan 22 22:26:20 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)

                                  top -S for LCDd

                                  
PID.....USERNAME.THR.PRI.NICE.SIZE...RES....STATE.TIME.WCPU.COMMAND
27586.nobody......1.....74..r30...3368K.1488K.RUN.....0:00.0.00%.LCDd
                                  1 Reply Last reply Reply Quote 0
                                  • T
                                    tix
                                    last edited by

                                    I turned LCDd on overnight and left my SSH sessions active running top -SH
                                    This morning I have an unresponsive machine except the SSH sessions are still active.  (Also, everyone was asleep so there was no usage from LAN to WAN.)

                                    I killed the LCDd process after capturing the information below and load drops to less than .10 but I cannot restart it.  If I use the webif it will generate the previously mentioned log entries and the same occurs starting it from the CLI.

                                    top -SH

                                    last pid: 31188;  load averages:  7.99,  7.75,  6.91        up 0+17:13:06  08:55:32
92 processes:  11 running, 68 sleeping, 1 zombie, 12 waiting
CPU: 18.9% user,  0.0% nice, 80.6% system,  0.5% interrupt,  0.0% idle
Mem: 62M Active, 15M Inact, 39M Wired, 34M Buf, 118M Free
Swap: 512M Total, 512M Free

  PID USERNAME PRI NICE   SIZE    RES STATE    TIME   WCPU COMMAND
34608 nobody    74  r30  3368K  1488K RUN     77:11 100.00% LCDd
   10 root     171 ki31     0K     8K RUN    797:50  0.00% idle
   11 root     -28    -     0K    96K WAIT     1:57  0.00% {swi5: +}
45412 root      44    0  6588K  4776K kqread   0:56  0.00% lighttpd
   11 root     -32    -     0K    96K WAIT     0:50  0.00% {swi4: clock}
    0 root     -16    0     0K    48K sched    0:44  0.00% {swapper}
34700 root      76    0 33092K 16244K RUN      0:31  0.00% php
45906 root      44    0  3712K  1960K RUN      0:31  0.00% top
32600 root      76    0 33092K 16136K RUN      0:31  0.00% php
40548 root      76   20  3656K  1492K piperd   0:14  0.00% sh
   13 root     -16    -     0K     8K -        0:13  0.00% yarrow
24126 root      44    0  4948K  2516K select   0:12  0.00% syslogd
19804 root      44    0  7992K  3604K select   0:11  0.00% sshd
   19 root      44    -     0K     8K syncer   0:07  0.00% syncer
35740 root      48    0 37188K 18800K piperd   0:07  0.00% php
21686 root      44    0  3316K   924K piperd   0:06  0.00% logger

                                    System.log tail

                                     tail /var/log/system.log
Jan 23 02:35:21 pfsense dnsmasq[6805]: possible DNS-rebind attack detected: appsforbb.com
Jan 23 02:58:07 pfsense dnsmasq[6805]: read /etc/hosts - 31 addresses
Jan 23 03:26:29 pfsense dnsmasq[6805]: read /etc/hosts - 31 addresses
Jan 23 03:58:37 pfsense dnsmasq[6805]: read /etc/hosts - 31 addresses
Jan 23 05:34:21 pfsense dnsmasq[6805]: read /etc/hosts - 31 addresses
Jan 23 06:34:48 pfsense dnsmasq[6805]: read /etc/hosts - 31 addresses
Jan 23 07:35:19 pfsense dnsmasq[6805]: read /etc/hosts - 31 addresses
Jan 23 07:59:59 pfsense dhclient: RENEW
Jan 23 07:59:59 pfsense dhclient: Creating resolv.conf
                                    1 Reply Last reply Reply Quote 0
                                    • stephenw10S
                                      stephenw10 Netgate Administrator
                                      last edited by

                                      Further confirmation of a problem. Thanks.
                                      By the way pfSense uses circular logs so you have to use clog to tail them.
                                      See: http://doc.pfsense.org/index.php/LOGS:Why_can%27t_I_view_view_log_files_with_cat/grep/etc%3F%28clog%29

                                      Steve

                                      1 Reply Last reply Reply Quote 0
                                      • M
                                        m4f1050
                                        last edited by

                                        Well, today when I woke up and saw my Watchguard I noticed the "Thanks for using pfSense" and hung LCDd…  I can restart it, but it would be nice for it not to crash.  Will keep testing...  All I did was add Interface  (and on the dropdown kept WAN)

                                        1 Reply Last reply Reply Quote 0
                                        • M
                                          mdima
                                          last edited by

                                          Hello everybody,
                                           I just updated the package. The news are the following:

                                          • Fix the uptime screen
                                          • In the settings, "Enable LCDproc" becomes "Enable LCDproc at startup"
                                          • Added "After Install Info" message
                                          • Limited the client loop to three times. After three errors connecting to the LCDd service the client will end

                                          I hope the 4th point will solve the problems for the Firebox boxes! Just wait for the 0.9 version of the package and update it…

                                          Thanks to all for the feedbacks,
                                          Michele

                                          EDIT: With a feedback, please post the driver/port you're using, the values of the options of the service and the list of the screens active, thanks!!

                                          1 Reply Last reply Reply Quote 0
                                          • P
                                            power_matz
                                            last edited by

                                            Hello,

                                            can I leave the LED backlight on all the time? Is this implemented in this update?
                                            Or will it come in a future version?

                                            M.

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post