LCDProc 0.5.4-dev

[mdima]

Hi Steve,
mmhhh… can you send me your config.xml file? (of course, hide the password, public ips, and so on)

Ciao,
Michele

[stephenw10]

Here's my config file, password redacted, it's test box so it doesn't have a public IP.
I don't see it in my logs any more, possibly because the logging level is now back at 3 or I was using the 'debug' version of LCDd, but previously there was a line at boot something like:

LCDd: Could not open 13666, aborting

There is still a log line:

LCDd: Connect from host 127.0.0.1:58234 on socket 12

This implies that at some point there are two clients running.

Steve

config-x-core.localdomain-20120223131917.xml.txt

[stephenw10]

I have replicated some of my previous testing for reference.
Editing lcdproc.inc so that the resulting lcdproc.sh is:

#!/bin/sh
# This file was automatically generated
# by the pfSense service handler.

rc_start() {

	ps auxw |awk '/lcdproc_client.ph[p]/ {print $2}'|xargs kill
	ps auxw |awk '/LCD[d]/ {print $2}'|xargs kill
	/usr/bin/nice -20 /usr/local/sbin/LCDd -u nobody -c /usr/local/etc/LCDd.conf
	/usr/bin/nice -20 /usr/local/bin/php -f /usr/local/pkg/lcdproc_client.php &

}

rc_stop() {

	ps auxw |awk '/lcdproc_client.ph[p]/ {print $2}'|xargs kill
	ps auxw |awk '/LCD[d]/ {print $2}'|xargs kill
}

case $1 in
	start)
		rc_start
		;;
	stop)
		rc_stop
		;;
	restart)
		rc_stop
		rc_start
		;;
esac

Results in after boot:

[2.0.1-RELEASE][root@x-core.localdomain]/root(1): ps aux|grep lcd
root   16096  3.0  6.9 36188 16980  ??  SN    1:41PM   0:00.27 /usr/local/bin/php -f /usr/local/pkg/lcdproc_client.php
root   16748  3.0  6.9 36188 16980  ??  SN    1:41PM   0:00.27 /usr/local/bin/php -f /usr/local/pkg/lcdproc_client.php
[2.0.1-RELEASE][root@x-core.localdomain]/root(2): ps aux | grep LCD

And in the system log:

Feb 23 13:41:31 	LCDd: Critical error while initializing, abort.
Feb 23 13:41:31 	LCDd: sock_init: error creating socket - Address already in use
Feb 23 13:41:31 	LCDd: sock_create_inet_socket: cannot bind to port 13666 at address 127.0.0.1 - Address already in use

Which implies this wasn't happening before.

Steve

[mdima]

mmhhh… Steve, stupid question.

Are you sure that somewhere there is a script that runs the package at the startup, as a surplus of the times where you had to run LCDproc manually because it was not compatible with the sdelcd driver?

Did you start from scratch with this test box?

Thanks,
Michele

[mdima]

Hello everybody,
    any update on this package? None is using it or it's considered running and stable?

Thanks for any feedback,
Michele

[stephenw10]

Sorry, not much spare time for testing.
As it stands, although it doesn't start cleanly, it is fully functional on the X-Core. The additional LCDd hardly uses much by way of resources and it sorts itself out the first time one of the interfaces changes. So if you are using a ppp WAN then when the address changes all packages are restarted and it come up clean.

My test box is a new install of 2.0.1 with no changes other than adding lcdproc-dev and some firewall rules so I can access it via the WAN interface for convenience.

Steve

[Brak]

I can only get lcdproc-dev to not crash-loop on my Firebox X Core when I spam the left arrow button and hope I can get the lcdproc menu to open up. I do this right after I restart/start the service. If I get the menu open, everything then works fine when I exit the menu.

I also have the issue of if an interface goes down, lcdproc crashes and attempts to restart.

[mdima]

mmhhh… what about all the people with non watchguard products?

eventually, do anybody has a firebox to lend me? I promise I send back after I check/fix/give it up...

[stephenw10]

Hmm, expensive shipping to Milan. Might be cheaper to just buy you one from Ebay!  ::)

Steve

[mdima]

Well, yes, but the shipping would be expensive anyway, plus I get a firebox I don't need… :D

really, this for me is a kind of hobby, and spending (the cheapest I found from Australia) 250 Euro to fix this is really a challenge... :D

Do you think we could involve watchguard for this? Or someone to share the send/return shipping costs...

[stephenw10]

We can definitely get one cheaper than that. The X-Core box I have here has become a bit temperamental. I'll keep a look out for another one.

Steve

[stephenw10]

Here's a suggestion, while reading through some other bootup scripts I found this:

// Do not process while booting
if($g['booting']) 
	exit;

Perhaps we could use this somehow to limit the number of reloads? Of course it could easily stop it loading at all.  ::)

Steve

[mdima]

Good hint, thanks!! I will make some experiments with it and let you know…

Ciao,
Michele

[marcelloc]

@stephenw10:

Here's a suggestion, while reading through some other bootup scripts I found this:

// Do not process while booting
if($g['booting']) 
	exit;

Perhaps we could use this somehow to limit the number of reloads? Of course it could easily stop it loading at all.  ::)

Steve

It's on dansguardian as well but I did not saw changes on bootup time or times it tries to restart daemon.

What I did was changing reload option to stop and start.

I'm not sure about That but it looks like pfsense bootup script calls sync_package function for every xml file on package. Dansguardian has about 20 XML files and It's boot takes more then a minute in start / stop calls.

Something I'll try is to do not stop/start daemon if uptime is less then 01 minute for example or check if last stop/start call has less then x seconds.

[fmertz]

I have a test driver with LED support. It's been tested some on X-Peak and X-Core-e models, but there is code for X-Core as well. The updated FreeBSD driver is here:

https://github.com/downloads/fmertz/sdeclcd/sdeclcd.so

Once up and running, telnet to lcdproc (pretend to be a client) and type

telnet localhost 13666
hello
connect LCDproc 0.5.5 protocol 0.3 lcd wid 20 hgt 2 cellwid 5 cellhgt 8
output 1 <—Short red blink about every 4 seconds
success
output 2 <—Short green blink about every 4 seconds
success

The output logic is this: we have 32 bit to work with, and we need 3 states (Red, Green and off). This is 2 bits. So, in 32 bits, I have 16 time slots to work with. So, basically, code in the LED sequence of colors you want to see (Red, Green or off) and keep filling in the groups of 2 bits by shifting. the sequence just repeats indefinitely.

Worksheet:
XXXX XXXX XXXX XXXX, X is 0,1, or 2, and represents 2 bits

0000 0000 0000 0001 is slow short blink red
0101 0101 0101 0101 is fast short blink red
0011 0011 0011 0011 is medium medium blink red
0000 1111 0000 1111 is slow long blink red
0000 2222 0000 1111 is slow blink alternating between red and green, and off in between

The representation above needs to be made decimal for the “output” command. Sequence is about 4 seconds.

Thanks for letting me know if this works out for everyone. Would be nice to work this out into the PHP client, too.

[easyhugo]

@easyhugo:

@mdima:

@easyhugo:

Hi Guys

Is it possible to ad this Lcd to

http://allnet.de/1577.html?&tx_mmallnetproductplugin_pi1[showUid]=421433&cHash=949c8a38a8
ftp://212.18.29.48/ftp/pub/allnet/utility-server/fw8888/lcm_server_1.0.tar.bz2

i,m trying this for some time but with no success, see other posts from me

thx max

Hi Max (easyhugo),
it's impossible to know for me which driver this LCD panel uses… do you know the chipset? Can it use one of the drivers already made or you need another driver?

Ciao,
Michele

Hi
sorry but no driver work with this display, it does not work without these lcm server.

@stephenw10:

My German is very bad!  :-[ (Only beaten by my non-existant Italian!  ::))

However, according to [url=http://www.ipcop-forum.de/forum/viewtopic.php?f=22&t=26948#p231301]this post by IPCop ledgend Wintermute the display in the FW8888 is an LCM-162.

This doesn't appear to be supported directly by LCDproc but this blog post seems to show it is possible. That's quite old now so support maybe better integrated.

What drivers/versions have you tried?

Steve

Edit: This post confirms this.

and yes wintermute is an excellent ipcop programmer, but ipcop is not an freebsd os so i cant copy the files .
i have tried to copy the lcm to the pfsense and change the config files but with no success.
my test with these lcm if i tried the dev version was not born  :D so at now i will connect the guys from allnet how this lcm will work
the answer i would then post

thx

edit:
from the lcm pckage:

Make commands:
     Static binary:
          gcc –static -o lcm_server lcm_server.c
       
     Dynamic linked binary:
          gcc -o lcm_server lcm_server.c

Execution command:
     lcm_server /dev/ttyS1 "Banner"

Command FIFO:
    /var/run/lcm_cmd

Available commands:
          Clear -- Clear the LCM display
      Home -- Set the cursor back to row 0, column 0
      Display {on/off/nocur} -- Turn display on, off and on without cursor
      BKLight {on/off}      -- Turn LCM backlight on and off
      Setpos {0~1} {0~15}    -- Set the cursor position to row and column
      Write {text}      -- Write the text to LCM start from
                current cursor position
    Examples:
echo "Display oncur" > /var/run/lcm_cmd
echo "Setpos 0 0" > /var/run/lcm_cmd
echo "Write test message" > /var/run/lcm_cmd

Key FIFO:
    /var/run/lcm_key

Available keys: UP, DOWN, RET, ESC

Example:
cat /var/run/lcm_key

Note: There is no key de-bounce mechanism on LCM.
      Multiple key response may happen while receiving keys.

hi

the guys from allnet are not the fastest, no response to my mail from 18.2.2012
so google is now my friend angain to my problem with these lcm server on fw8888

in found an interesting site http://www.tecnowledge.net/2009/06/getting-lcdproc-to-work-with-an-lcm-162-freebsd/
how the managed these lcm server in freebsd
this description are from 2009 with an lcdproc version 0.5.2 but now im not sure if these changes are now included

thx max

max

[stephenw10]

In a parallel discussion we have established that the lcm-162 is in fact almost identical to the firebox lcd (or at least the nexcom display is).
Try using the firebox sdeclcd driver and see if you get anything at all.

Steve

[fmertz]

Execution command:
    lcm_server /dev/ttyS1 "Banner"

This tells me the interface is serial, not parallel. Good old RS-232. My SDEC LCD driver will not work.

Looking through the code here:```
ftp://212.18.29.48/ftp/pub/allnet/utility-server/fw8888/lcm_server_1.0.tar.bz2

It seems like the commands for the LCD are the "usual" set (same as SDEC LCD, and possibly HD44780). Being serial interface, you can give a shot to the HD44780, part of lcdproc. You will have to read the documentation for the driver to properly configure it for your display. The reward is that, once working (if it does), then clients like lcdproc itself, or the pfSense PHP client will work, too. Good luck, and keep us posted.

PS: [http://www.tecnowledge.net/2009/06/getting-lcdproc-to-work-with-an-lcm-162-freebsd/](http://www.tecnowledge.net/2009/06/getting-lcdproc-to-work-with-an-lcm-162-freebsd/) is for a parallel port interface, not serial.

[mdima]

Hi fmertz,
  well, if the command/behavior is the same, maybe the sdec driver could accept the port as parameter from the client (there are already serial and parallel ports). Just an idea…

Ciao,
Michele

[fmertz]

This would require new code. The parallel interface is driven directly with in/out machine language commands. Serial ports are typically coded with more abstraction, i.e. treated like files. At this point, let's see if the HD driver will do…