LCDProc 0.5.4-dev
-
I'm having trouble with my Matrix Orbital LK202-25 V1.12
It seems to be setting some pixels to all black. And also always the first and last proceeded by a K: Have a look at the attached image:
I also get this from systemlog:
Apr 12 12:59:01 php: lcdproc: Start client procedure. Error counter: (0)
Apr 12 12:59:00 LCDd: MtxOrb: unable to read device serial number
Apr 12 12:59:00 LCDd: MtxOrb: unable to read device firmware revision
Apr 12 12:59:00 LCDd: MtxOrb: unable to read device type
-
I would love to get this working. Any help would be so appreciated. Even a direction in way of how to setup the LCDd.conf file would help.
Are you using the package or just configuring LCDd.conf for testing purposes? Usually the package generates the lcdd.conf file automatically.
FTDI is a usb to serial interface. To get this working you probably want to direct LCDd to use the usb connected serial port not the USB port directly.
Look in /dev/ without the USB connected. Now connect the USB and look in /dev/ again. You should see some new serial devices have appeared. A 'U' in the name implies they are USB connected.
Use serial port and whatever device appeared in the conf.Steve
Edit: Actually there appears to be special support for that LCD in lcdproc 0.5. Set driver type to hd44780 and connection type to pertelian. Set the port to whatever new serial port you found. You will have to do this manually at the moment because the lcdproc-dev package only supports lcd2usb as a connection type currently. Also your setting will be overwritten at boot! :-\
-
Any news / progress on the 4 Leds of the CFA635 ?
I modified the lcdproc_client.php to work with the CFA635 (driver CFontzPacket) inclusive the 4 LEDs. I also changed the IPSec detection for the IPSec screen (it was not working in the current version).
Led 1 : CPU usage
Led 2 : Interface status
Led 3 : IPSec status
Led 4 : Gateway statusMaybe someone can include this into the package ?
/* $Id$ */ /* lcdproc_client.php Copyright (C) 2007 Seth Mos <seth.mos@xs4all.nl>Copyright (C) 2012 Michele Di Maria <michele@nt2.it>All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1\. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2\. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* trick interface into running this. we are only * calling from useland so this is not a security issue */ require_once("config.inc"); require_once("functions.inc"); require_once("interfaces.inc"); require_once("ipsec.inc"); require_once("/usr/local/pkg/lcdproc.inc"); function get_pfstate() { global $config; $matches = ""; if (isset($config['system']['maximumstates']) and $config['system']['maximumstates'] > 0) $maxstates="/{$config['system']['maximumstates']}"; else $maxstates="/". pfsense_default_state_size(); $curentries = `/sbin/pfctl -si |grep current`; if (preg_match("/([0-9]+)/", $curentries, $matches)) { $curentries = $matches[1]; } return $curentries . $maxstates; } function disk_usage() { $dfout = ""; exec("/bin/df -h | /usr/bin/grep -w '/' | /usr/bin/awk '{ print $5 }' | /usr/bin/cut -d '%' -f 1", $dfout); $diskusage = trim($dfout[0]); return $diskusage; } function mem_usage() { $memory = ""; exec("/sbin/sysctl -n vm.stats.vm.v_page_count vm.stats.vm.v_inactive_count " . "vm.stats.vm.v_cache_count vm.stats.vm.v_free_count", $memory); $totalMem = $memory[0]; $availMem = $memory[1] + $memory[2] + $memory[3]; $usedMem = $totalMem - $availMem; $memUsage = round(($usedMem * 100) / $totalMem, 0); return $memUsage; } /* Calculates non-idle CPU time and returns as a percentage */ function cpu_usage() { $duration = 250000; $diff = array('user', 'nice', 'sys', 'intr', 'idle'); $cpuTicks = array_combine($diff, explode(" ", `/sbin/sysctl -n kern.cp_time`)); usleep($duration); $cpuTicks2 = array_combine($diff, explode(" ", `/sbin/sysctl -n kern.cp_time`)); $totalStart = array_sum($cpuTicks); $totalEnd = array_sum($cpuTicks2); // Something wrapped ?!?! if ($totalEnd <= $totalStart) return 0; // Calculate total cycles used $totalUsed = ($totalEnd - $totalStart) - ($cpuTicks2['idle'] - $cpuTicks['idle']); // Calculate the percentage used $cpuUsage = floor(100 * ($totalUsed / ($totalEnd - $totalStart))); return $cpuUsage; } function get_uptime_stats() { exec("/usr/bin/uptime", $output, $ret); $temp = explode(",", $output[0]); if(stristr($output[0], "day")) { $status = "$temp[0] $temp[1]"; } else { $status = "$temp[0] "; } $status = trim(str_replace(" ", " ", $status)); $status = substr($status, strpos($status, "up ") + 3); return($status); } function get_loadavg_stats() { exec("/usr/bin/uptime", $output, $ret); if(stristr($output[0], "day")) { $temp = explode(" ", $output[0]); $status = "$temp[11] $temp[12] $temp[13]"; } else { $temp = explode(" ", $output[0]); $status = "$temp[10] $temp[11] $temp[12]"; } return($status); } function get_mbuf_stats() { exec("netstat -mb | grep \"mbufs in use\" | awk '{ print $1 }' | cut -d\"/\" -f1", $mbufs_inuse); exec("netstat -mb | grep \"mbufs in use\" | awk '{ print $1 }' | cut -d\"/\" -f3", $mbufs_total); $status = "$mbufs_inuse[0] \/ $mbufs_total[0]"; return($status); } function get_version() { global $g; $version = @file_get_contents("/etc/version"); $version = trim($version); return("{$g['product_name']} {$version}"); } function get_cpufrequency(){ $cpufreqs = ""; exec("/sbin/sysctl -n dev.cpu.0.freq_levels", $cpufreqs); $cpufreqs = explode(" ", trim($cpufreqs[0])); $maxfreq = explode("/", $cpufreqs[0]); $maxfreq = $maxfreq[0]; $curfreq = ""; exec("/sbin/sysctl -n dev.cpu.0.freq", $curfreq); $curfreq = trim($curfreq[0]); $status = "$curfreq\/$maxfreq Mhz"; return($status); } function get_cpufrequency_perc(){ $cpufreqs = ""; exec("/sbin/sysctl -n dev.cpu.0.freq_levels", $cpufreqs); $cpufreqs = explode(" ", trim($cpufreqs[0])); $maxfreq = explode("/", $cpufreqs[0]); $maxfreq = $maxfreq[0]; $curfreq = ""; exec("/sbin/sysctl -n dev.cpu.0.freq", $curfreq); $curfreq = trim($curfreq[0]); $status = $curfreq/$maxfreq * 100; return($status); } function get_interfaces_stats() { global $g; global $config; $ifstatus = array(); $i = 0; $ifdescrs = array('wan' => 'WAN', 'lan' => 'LAN'); for ($j = 1; isset($config['interfaces']['opt' . $j]); $j++) { $ifdescrs['opt' . $j] = $config['interfaces']['opt' . $j]['descr']; } foreach ($ifdescrs as $ifdescr => $ifname){ $ifinfo = get_interface_info($ifdescr); if($ifinfo['status'] == "up") { $online = "Up"; } else { $online = "Down"; } if(!empty($ifinfo['ipaddr'])) { $ip = htmlspecialchars($ifinfo['ipaddr']); } else { $ip = "-"; } $ifstatus[] = htmlspecialchars($ifname) ." [$online]"; } $status = " ". implode(", ", $ifstatus); return($status); } function get_slbd_stats() { global $g; global $config; if (!is_array($config['load_balancer']['lbpool'])) { $config['load_balancer']['lbpool'] = array(); } $a_pool = &$config['load_balancer']['lbpool']; $slbd_logfile = "{$g['varlog_path']}/slbd.log"; $nentries = $config['syslog']['nentries']; if (!$nentries) $nentries = 50; $now = time(); $year = date("Y"); $pstatus = ""; $i = 0; foreach ($a_pool as $vipent) { $pstatus[] = "{$vipent['name']}"; if ($vipent['type'] == "gateway") { $poolfile = "{$g['tmp_path']}/{$vipent['name']}.pool"; if(file_exists("$poolfile")) { $poolstatus = file_get_contents("$poolfile"); } else { continue; } foreach ((array) $vipent['servers'] as $server) { $lastchange = ""; $svr = split("\|", $server); $monitorip = $svr[1]; if(stristr($poolstatus, $monitorip)) { $online = "Up"; } else { $online = "Down"; } $pstatus[] = strtoupper($svr[0]) ." [{$online}]"; } } else { $pstatus[] = "{$vipent['monitor']}"; } } if(count($a_pool) == 0) { $pstatus[] = "Disabled"; } $status = implode(", ", $pstatus); return($status); } function get_carp_stats () { global $g; global $config; if(is_array($config['virtualip']['vip'])) { $carpint = 0; $initcount = 0; $mastercount = 0; $backupcount = 0; foreach($config['virtualip']['vip'] as $carp) { if ($carp['mode'] != "carp") { continue; } $ipaddress = $carp['subnet']; $password = $carp['password']; $netmask = $carp['subnet_bits']; $vhid = $carp['vhid']; $advskew = $carp['advskew']; $carp_int = find_carp_interface($ipaddress); $status = get_carp_interface_status($carp_int); switch($status) { case "MASTER": $mastercount++; break; case "BACKUP": $backupcount++; break; case "INIT": $initcount++; break; } } $status = "M/B/I {$mastercount}/{$backupcount}/{$initcount}"; } else { $status = "CARP Disabled"; } return($status); } function get_ipsec_tunnel_sad() { /* query SAD */ if(file_exists("/usr/local/sbin/setkey")) $fd = @popen("/usr/local/sbin/setkey -D", "r"); else $fd = @popen("/sbin/setkey -D", "r"); $sad = array(); if ($fd) { while (!feof($fd)) { $line = chop(fgets($fd)); if (!$line) continue; if ($line == "No SAD entries.") break; if ($line[0] != "\t") { if (is_array($cursa)) $sad[] = $cursa; $cursa = array(); list($cursa['src'],$cursa['dst']) = explode(" ", $line); $i = 0; } else { $linea = explode(" ", trim($line)); if ($i == 1) { $cursa['proto'] = $linea[0]; $cursa['spi'] = substr($linea[2], strpos($linea[2], "x")+1, -1); } else if ($i == 2) { $cursa['ealgo'] = $linea[1]; } else if ($i == 3) { $cursa['aalgo'] = $linea[1]; } } $i++; } if (is_array($cursa) && count($cursa)) $sad[] = $cursa; pclose($fd); } return($sad); } function get_ipsec_tunnel_src($tunnel) { global $g, $config, $sad; $if = "WAN"; if ($tunnel['interface']) { $if = $tunnel['interface']; $realinterface = convert_friendly_interface_to_real_interface_name($if); $interfaceip = find_interface_ip($realinterface); } return $interfaceip; } function output_ipsec_tunnel_status($tunnel) { global $g, $config, $sad; $if = "WAN"; $interfaceip = get_ipsec_tunnel_src($tunnel); $foundsrc = false; $founddst = false; if(!is_array($sad)) { /* we have no sad array, bail */ return(false); } foreach($sad as $sa) { if($sa['src'] == $interfaceip) $foundsrc = true; if($sa['dst'] == $tunnel['remote-gateway']) $founddst = true; } if($foundsrc && $founddst) { /* tunnel is up */ $iconfn = "pass"; return(true); } else { /* tunnel is down */ $iconfn = "reject"; return(false); } } function get_ipsec_stats_old() { global $g, $config, $sad; $sad = array(); $sad = get_ipsec_tunnel_sad(); $activecounter = 0; $inactivecounter = 0; if($config['ipsec']['tunnel']) { foreach ($config['ipsec']['tunnel'] as $tunnel){ $ipsecstatus = false; $tun_disabled = "false"; $foundsrc = false; $founddst = false; if (isset($tunnel['disabled'])) { $tun_disabled = "true"; continue; } if(output_ipsec_tunnel_status($tunnel)) { /* tunnel is up */ $iconfn = "true"; $activecounter++; } else { /* tunnel is down */ $iconfn = "false"; $inactivecounter++; } } } if (is_array($config['ipsec']['tunnel'])) { $status = "Up/Down $activecounter/$inactivecounter"; } else { $status = "Up/Down $activecounter/$inactivecounter";//"IPSEC Disabled"; } return($status); } function get_ipsec_stats() { global $config; if (isset($config['ipsec']['phase1'])){ $spd = ipsec_dump_spd(); $sad = ipsec_dump_sad(); $activecounter = 0; $inactivecounter = 0; foreach ($config['ipsec']['phase2'] as $ph2ent){ ipsec_lookup_phase1($ph2ent,$ph1ent); $ipsecstatus = false; $tun_disabled = "false"; $foundsrc = false; $founddst = false; if (isset($ph1ent['disabled']) || isset($ph2ent['disabled'])) { $tun_disabled = "true"; continue; } if(ipsec_phase2_status($spd,$sad,$ph1ent,$ph2ent)) { /* tunnel is up */ $iconfn = "true"; $activecounter++; } else { /* tunnel is down */ $iconfn = "false"; $inactivecounter++; } } } if (isset($config['ipsec']['phase1'])){ $status = "Up/Down $activecounter/$inactivecounter"; } else { $status = "IPSEC Disabled"; } return($status); } /* Define functions */ function send_lcd_commands($lcd, $lcd_cmds) { if(!is_array($lcd_cmds) || (empty($lcd_cmds))) { lcdproc_warn("Failed to interpret lcd commands"); return; } while (($cmd_output = fgets($lcd, 8000)) !== false) { if(preg_match("/^huh?/", $cmd_output)) { lcdproc_notice("LCDd output: \"$cmd_output\". Executed \"$lcd_cmd\""); } } foreach($lcd_cmds as $lcd_cmd) { if(! fwrite($lcd, "$lcd_cmd\n")) { lcdproc_warn("Connection to LCDd process lost $errstr ($errno)"); $lcdproc_connect_errors++; return false; } } return true; } function get_lcdpanel_width(){ global $config; $lcdproc_size_config = $config['installedpackages']['lcdproc']['config'][0]; if (is_null($lcdproc_size_config['size'])) { return "16"; } else { $dimensions = split("x", $lcdproc_size_config['size']); return $dimensions[0]; } } function get_lcdpanel_height(){ global $config; $lcdproc_size_config = $config['installedpackages']['lcdproc']['config'][0]; if (is_null($lcdproc_size_config['size'])) { return "2"; } else { $dimensions = split("x", $lcdproc_size_config['size']); return $dimensions[1]; } } function get_lcdpanel_refresh_frequency(){ global $config; $lcdproc_size_config = $config['installedpackages']['lcdproc']['config'][0]; $value = $lcdproc_size_config['refresh_frequency']; if (is_null($value)) { return "5"; } else { return $value; } } function outputled_enabled_CFontzPacket(){ global $config; $lcdproc_config = $config['installedpackages']['lcdproc']['config'][0]; $value = $lcdproc_config['outputleds']; if (is_null($value)) {return false;} else { if ($value && $lcdproc_config['driver'] == "CFontzPacket") {return true;} else {return false;} } } function outputled_enabled_CFontz633(){ global $config; $lcdproc_config = $config['installedpackages']['lcdproc']['config'][0]; $value = $lcdproc_config['outputleds']; if (is_null($value)) {return false;} else { if ($value && $lcdproc_config['driver'] == "CFontz633") {return true;} else {return false;} } } function outputled_carp () { /* Returns the status of CARP for the box. Assumes ALL CARP status are the same for all the intefaces. -1 = CARP Disabled 0 = CARP on Backup 1 = CARP on Master */ global $g; global $config; if(is_array($config['virtualip']['vip'])) { $carpint = 0; foreach($config['virtualip']['vip'] as $carp) { if ($carp['mode'] != "carp") { continue; } $carp_int = find_carp_interface($carp['subnet']); $status = get_carp_interface_status($carp_int); switch($status) { case "MASTER": return 1; break; case "BACKUP": return 0; break; } } } else { return -1; } } function outputled_ipsec () { /* Returns the status of CARP for the box. Assumes ALL CARP status are the same for all the intefaces. -1 = IPSec Disabled 0 = IPSecot least one Tunnel Error 1 = IPSec all Tunnes up */ global $g; global $config; global $config; if (isset($config['ipsec']['phase1'])){ $spd = ipsec_dump_spd(); $sad = ipsec_dump_sad(); $activecounter = 0; $inactivecounter = 0; foreach ($config['ipsec']['phase2'] as $ph2ent){ ipsec_lookup_phase1($ph2ent,$ph1ent); $ipsecstatus = false; $tun_disabled = "false"; $foundsrc = false; $founddst = false; if (isset($ph1ent['disabled']) || isset($ph2ent['disabled'])) { $tun_disabled = "true"; continue; } if(ipsec_phase2_status($spd,$sad,$ph1ent,$ph2ent)) { /* tunnel is up */ $iconfn = "true"; $activecounter++; } else { /* tunnel is down */ $iconfn = "false"; $inactivecounter++; } } } if (isset($config['ipsec']['phase1'])){ if ($inactivecounter == 0) { return 1; } else { return 0; } } else { return -1; } } function outputled_gateway() { /* Returns the status of the gateways. -1 = No gateway defined 0 = At least 1 gateway down or with issues 1 = All gateway up */ global $g; global $config; $gateways_status = array(); $gateways_status = return_gateways_status(true); foreach ($a_gateways as $gname => $gateway) { if ($gateways_status[$gname]['status'] != "none") { return 0; } } return 1; } function get_traffic_stats(&$in_data, &$out_data){ global $config; global $traffic_last_ugmt, $traffic_last_ifin, $traffic_last_ifout; $lcdproc_screen_config = $config['installedpackages']['lcdprocscreens']['config'][0]; /* read the configured interface */ $ifnum = $lcdproc_screen_config['scr_traffic_interface']; /* get the real interface name (code from ifstats.php)*/ $realif = get_real_interface($ifnum); if(!$realif) $realif = $ifnum; // Need for IPSec case interface. /* get the interface stats (code from ifstats.php)*/ $ifinfo = pfSense_get_interface_stats($realif); /* get the current time (code from ifstats.php)*/ $temp = gettimeofday(); $timing = (double)$temp["sec"] + (double)$temp["usec"] / 1000000.0; /* calculate the traffic stats */ $deltatime = $timing - $traffic_last_ugmt; $in_data = "IN: " . formatSpeedBits(((double)$ifinfo['inbytes']-$traffic_last_ifin)/$deltatime); $out_data = "OUT: " . formatSpeedBits(((double)$ifinfo['outbytes']-$traffic_last_ifout)/$deltatime); $traffic_last_ugmt = $timing; $traffic_last_ifin = (double)$ifinfo['inbytes']; $traffic_last_ifout = (double)$ifinfo['outbytes']; } function formatSpeedBits($speed) { /* format speed in bits/sec, input: bytes/sec Code from: graph.php ported to PHP*/ if ($speed < 125000) {return sprintf("%3d.1 Kbps", $speed / 125);} if ($speed < 125000000) {return sprintf("%3d.1 Mbps", $speed / 125000);} // else return sprintf("%3d.1 Gbps", $speed / 125000000); } function add_summary_declaration(&$lcd_cmds, $name) { $lcdpanel_height = get_lcdpanel_height(); $lcdpanel_width = get_lcdpanel_width(); if ($lcdpanel_height >= "4") { $lcd_cmds[] = "widget_add $name title_summary string"; $lcd_cmds[] = "widget_add $name text_summary string"; if ($lcdpanel_width > "16") {$lcd_cmds[] = "widget_set $name title_summary 1 3 \"CPU MEM STATES FREQ\"";} else {$lcd_cmds[] = "widget_set $name title_summary 1 3 \"CPU MEM STATES\"";} } } function add_summary_values(&$lcd_cmds, $name, $lcd_summary_data) { if ($lcd_summary_data != "") { $lcd_cmds[] = "widget_set $name text_summary 1 4 \"{$lcd_summary_data}\""; } } function build_interface($lcd) { global $g; global $config; $lcdproc_screens_config = $config['installedpackages']['lcdprocscreens']['config'][0]; $refresh_frequency = get_lcdpanel_refresh_frequency() * 8; $lcd_cmds = array(); $lcd_cmds[] = "hello"; $lcd_cmds[] = "client_set name pfSense"; /* process screens to display */ if(is_array($lcdproc_screens_config)) { foreach($lcdproc_screens_config as $name => $screen) { if($screen == "on") { switch($name) { case "scr_version": $lcd_cmds[] = "screen_add $name"; $lcd_cmds[] = "screen_set $name heartbeat off"; $lcd_cmds[] = "screen_set $name name $name"; $lcd_cmds[] = "screen_set $name duration $refresh_frequency"; $lcd_cmds[] = "widget_add $name title_wdgt string"; $lcd_cmds[] = "widget_add $name text_wdgt scroller"; $lcd_cmds[] = "widget_set $name title_wdgt 1 1 \"Welcome to\""; break; case "scr_time": $lcd_cmds[] = "screen_add $name"; $lcd_cmds[] = "screen_set $name heartbeat off"; $lcd_cmds[] = "screen_set $name name $name"; $lcd_cmds[] = "screen_set $name duration $refresh_frequency"; $lcd_cmds[] = "widget_add $name title_wdgt string"; $lcd_cmds[] = "widget_add $name text_wdgt scroller"; $lcd_cmds[] = "widget_set $name title_wdgt 1 1 \"+ System Time\""; break; case "scr_uptime": $lcd_cmds[] = "screen_add $name"; $lcd_cmds[] = "screen_set $name heartbeat off"; $lcd_cmds[] = "screen_set $name name $name"; $lcd_cmds[] = "screen_set $name duration $refresh_frequency"; $lcd_cmds[] = "widget_add $name title_wdgt string"; $lcd_cmds[] = "widget_add $name text_wdgt scroller"; $lcd_cmds[] = "widget_set $name title_wdgt 1 1 \"+ System Uptime\""; break; case "scr_hostname": $lcd_cmds[] = "screen_add $name"; $lcd_cmds[] = "screen_set $name heartbeat off"; $lcd_cmds[] = "screen_set $name name $name"; $lcd_cmds[] = "screen_set $name duration $refresh_frequency"; $lcd_cmds[] = "widget_add $name title_wdgt string"; $lcd_cmds[] = "widget_add $name text_wdgt scroller"; $lcd_cmds[] = "widget_set $name title_wdgt 1 1 \"+ System Name\""; break; case "scr_system": $lcd_cmds[] = "screen_add $name"; $lcd_cmds[] = "screen_set $name heartbeat off"; $lcd_cmds[] = "screen_set $name name $name"; $lcd_cmds[] = "screen_set $name duration $refresh_frequency"; $lcd_cmds[] = "widget_add $name title_wdgt string"; $lcd_cmds[] = "widget_add $name text_wdgt scroller"; $lcd_cmds[] = "widget_set $name title_wdgt 1 1 \"+ System Stats\""; break; case "scr_disk": $lcd_cmds[] = "screen_add $name"; $lcd_cmds[] = "screen_set $name heartbeat off"; $lcd_cmds[] = "screen_set $name name $name"; $lcd_cmds[] = "screen_set $name duration $refresh_frequency"; $lcd_cmds[] = "widget_add $name title_wdgt string"; $lcd_cmds[] = "widget_add $name text_wdgt scroller"; $lcd_cmds[] = "widget_set $name title_wdgt 1 1 \"+ Disk Use\""; break; case "scr_load": $lcd_cmds[] = "screen_add $name"; $lcd_cmds[] = "screen_set $name heartbeat off"; $lcd_cmds[] = "screen_set $name name $name"; $lcd_cmds[] = "screen_set $name duration $refresh_frequency"; $lcd_cmds[] = "widget_add $name title_wdgt string"; $lcd_cmds[] = "widget_add $name text_wdgt scroller"; $lcd_cmds[] = "widget_set $name title_wdgt 1 1 \"+ Load Averages\""; break; case "scr_states": $lcd_cmds[] = "screen_add $name"; $lcd_cmds[] = "screen_set $name heartbeat off"; $lcd_cmds[] = "screen_set $name name $name"; $lcd_cmds[] = "screen_set $name duration $refresh_frequency"; $lcd_cmds[] = "widget_add $name title_wdgt string"; $lcd_cmds[] = "widget_add $name text_wdgt scroller"; $lcd_cmds[] = "widget_set $name title_wdgt 1 1 \"+ Traffic States\""; break; case "scr_carp": $lcd_cmds[] = "screen_add $name"; $lcd_cmds[] = "screen_set $name heartbeat off"; $lcd_cmds[] = "screen_set $name name $name"; $lcd_cmds[] = "screen_set $name duration $refresh_frequency"; $lcd_cmds[] = "widget_add $name title_wdgt string"; $lcd_cmds[] = "widget_add $name text_wdgt scroller"; $lcd_cmds[] = "widget_set $name title_wdgt 1 1 \"+ CARP State\""; break; case "scr_ipsec": $lcd_cmds[] = "screen_add $name"; $lcd_cmds[] = "screen_set $name heartbeat off"; $lcd_cmds[] = "screen_set $name name $name"; $lcd_cmds[] = "screen_set $name duration $refresh_frequency"; $lcd_cmds[] = "widget_add $name title_wdgt string"; $lcd_cmds[] = "widget_add $name text_wdgt scroller"; $lcd_cmds[] = "widget_set $name title_wdgt 1 1 \"+ IPsec Tunnels\""; break; case "scr_slbd": $lcd_cmds[] = "screen_add $name"; $lcd_cmds[] = "screen_set $name heartbeat off"; $lcd_cmds[] = "screen_set $name name $name"; $lcd_cmds[] = "screen_set $name duration $refresh_frequency"; $lcd_cmds[] = "widget_add $name title_wdgt string"; $lcd_cmds[] = "widget_add $name text_wdgt scroller"; $lcd_cmds[] = "widget_set $name title_wdgt 1 1 \"+ Load Balancer\""; break; case "scr_interfaces": $lcd_cmds[] = "screen_add $name"; $lcd_cmds[] = "screen_set $name heartbeat off"; $lcd_cmds[] = "screen_set $name name $name"; $lcd_cmds[] = "screen_set $name duration $refresh_frequency"; $lcd_cmds[] = "widget_add $name title_wdgt string"; $lcd_cmds[] = "widget_add $name text_wdgt scroller"; $lcd_cmds[] = "widget_set $name title_wdgt 1 1 \"+ Interfaces\""; break; case "scr_mbuf": $lcd_cmds[] = "screen_add $name"; $lcd_cmds[] = "screen_set $name heartbeat off"; $lcd_cmds[] = "screen_set $name name $name"; $lcd_cmds[] = "screen_set $name duration $refresh_frequency"; $lcd_cmds[] = "widget_add $name title_wdgt string"; $lcd_cmds[] = "widget_add $name text_wdgt scroller"; $lcd_cmds[] = "widget_set $name title_wdgt 1 1 \"+ MBuf Usage\""; break; case "scr_cpufrequency": $lcd_cmds[] = "screen_add $name"; $lcd_cmds[] = "screen_set $name heartbeat off"; $lcd_cmds[] = "screen_set $name name $name"; $lcd_cmds[] = "screen_set $name duration $refresh_frequency"; $lcd_cmds[] = "widget_add $name title_wdgt string"; $lcd_cmds[] = "widget_add $name text_wdgt scroller"; $lcd_cmds[] = "widget_set $name title_wdgt 1 1 \"+ CPU Frequency\""; break; case "scr_traffic": $lcd_cmds[] = "screen_add $name"; $lcd_cmds[] = "screen_set $name heartbeat off"; $lcd_cmds[] = "screen_set $name name $name"; $lcd_cmds[] = "screen_set $name duration $refresh_frequency"; $lcd_cmds[] = "widget_add $name title_wdgt string"; $lcd_cmds[] = "widget_add $name text_wdgt string"; break; } add_summary_declaration($lcd_cmds, $name); } } } send_lcd_commands($lcd, $lcd_cmds); } function loop_status($lcd) { global $g; global $config; global $lcdproc_connect_errors; $lcdproc_screens_config = $config['installedpackages']['lcdprocscreens']['config'][0]; $lcdpanel_width = get_lcdpanel_width(); $lcdpanel_height = get_lcdpanel_height(); if(empty($g['product_name'])) { $g['product_name'] = "pfSense"; } $refresh_frequency = get_lcdpanel_refresh_frequency(); /* keep a counter to see how many times we can loop */ $i = 1; while($i) { /* prepare the summary data */ if ($lcdpanel_height >= "4") { $summary_states = split("/",get_pfstate()); $lcd_summary_data = sprintf("%02d%% %02d%% %6d", cpu_usage(), mem_usage(), $summary_states[0]); if ($lcdpanel_width > "16") { $lcd_summary_data = $lcd_summary_data . sprintf(" %3d%%", get_cpufrequency_perc()); } } else { $lcd_summary_data = "";} $lcd_cmds = array(); /* initializes the widget counter */ $widget_counter = 0; /* controls the output leds */ if (outputled_enabled_CFontz633() | outputled_enabled_CFontzPacket()) { $led_output_value = 0; /* LED 1: CPU Usage */ if (cpu_usage() > 50) {$led_output_value = $led_output_value + pow(2, 4);} else {$led_output_value = $led_output_value + pow(2, 0);} /* LED 2: Interface status */ if (substr_count(get_interfaces_stats(), "Down") > 0 ) {$led_output_value = $led_output_value + pow(2, 5);} else {$led_output_value = $led_output_value + pow(2, 1);} /* LED 3: IPSec status */ switch (outputled_ipsec ()) { case -1:/* IPSec disabled */ case 0: /* IPSec at least one Tunnel with error */ {$led_output_value = $led_output_value + pow(2, 6);} case 1: /* IPSec all Tunnel up */ {$led_output_value = $led_output_value + pow(2, 2);} } /* LED 4: Gateway status */ switch (outputled_gateway()) { case -1:/* Gateways not configured */ case 0: /* Gateway down or with issues */ {$led_output_value = $led_output_value + pow(2, 7);} case 1: /* All Gateways up */ {$led_output_value = $led_output_value + pow(2, 3);} } /* Sends the command to the panel */ $lcd_cmds[] = "output {$led_output_value}"; //$lcd_cmds[] = "output {1111 1111}"; } /* process screens to display */ foreach((array) $lcdproc_screens_config as $name => $screen) { if($screen != "on") { continue; } switch($name) { case "scr_version": $version = get_version(); $lcd_cmds[] = "widget_set $name text_wdgt 1 2 $lcdpanel_width 2 h 4 \"{$version}\""; break; case "scr_time": $time = date("n/j/Y H:i"); $lcd_cmds[] = "widget_set $name text_wdgt 1 2 $lcdpanel_width 2 h 4 \"{$time}\""; break; case "scr_uptime": $uptime = get_uptime_stats(); $lcd_cmds[] = "widget_set $name text_wdgt 1 2 $lcdpanel_width 2 h 4 \"{$uptime}\""; break; case "scr_hostname": exec("/bin/hostname", $output, $ret); $hostname = $output[0]; $lcd_cmds[] = "widget_set $name text_wdgt 1 2 $lcdpanel_width 2 h 4 \"{$hostname}\""; break; case "scr_system": $processor = cpu_usage(); $memory = mem_usage(); $lcd_cmds[] = "widget_set $name text_wdgt 1 2 $lcdpanel_width 2 h 4 \"CPU {$processor}%, Mem {$memory}%\""; break; case "scr_disk": $disk = disk_usage(); $lcd_cmds[] = "widget_set $name text_wdgt 1 2 $lcdpanel_width 2 h 4 \"Disk {$disk}%\""; break; case "scr_load": $loadavg = get_loadavg_stats(); $lcd_cmds[] = "widget_set $name text_wdgt 1 2 $lcdpanel_width 2 h 4 \"{$loadavg}\""; break; case "scr_states": $states = get_pfstate(); $lcd_cmds[] = "widget_set $name text_wdgt 1 2 $lcdpanel_width 2 h 4 \"Cur/Max {$states}\""; break; case "scr_carp": $carp = get_carp_stats(); $lcd_cmds[] = "widget_set $name text_wdgt 1 2 $lcdpanel_width 2 h 4 \"{$carp}\""; break; case "scr_ipsec": $ipsec = get_ipsec_stats(); $lcd_cmds[] = "widget_set $name text_wdgt 1 2 $lcdpanel_width 2 h 4 \"{$ipsec}\""; break; case "scr_slbd": $slbd = get_slbd_stats(); $lcd_cmds[] = "widget_set $name text_wdgt 1 2 $lcdpanel_width 2 h 4 \"{$slbd}\""; break; case "scr_interfaces": $interfaces = get_interfaces_stats(); $lcd_cmds[] = "widget_set $name text_wdgt 1 2 $lcdpanel_width 2 h 4 \"{$interfaces}\""; break; case "scr_mbuf": $mbufstats = get_mbuf_stats(); $lcd_cmds[] = "widget_set $name text_wdgt 1 2 $lcdpanel_width 2 h 4 \"{$mbufstats}\""; break; case "scr_cpufrequency": $cpufreq = get_cpufrequency(); $lcd_cmds[] = "widget_set $name text_wdgt 1 2 $lcdpanel_width 2 h 4 \"{$cpufreq}\""; break; case "scr_traffic": get_traffic_stats($in_data, $out_data); $lcd_cmds[] = "widget_set $name title_wdgt 1 1 \"{$in_data}\""; $lcd_cmds[] = "widget_set $name text_wdgt 1 2 \"{$out_data}\""; break; } if ($name != "scr_traffic_interface") { $widget_counter++; add_summary_values($lcd_cmds, $name, $lcd_summary_data); } } if (send_lcd_commands($lcd, $lcd_cmds)) { $lcdproc_connect_errors = 0; // Reset the error counter } else { //an error occurred return; } if (($refresh_frequency * $widget_counter) > 5) { sleep(5); } else { sleep($refresh_frequency * $widget_counter); } $i++; } } /* Initialize the wan traffic counters */ $traffic_last_ugmt = 0; $traffic_last_ifin = 0; $traffic_last_ifout = 0; /* Initialize the global error counter */ $lcdproc_connect_errors = 0; $lcdproc_max_connect_errors = 3; /* Connect to the LCDd port and interface with the LCD */ while ($lcdproc_connect_errors <= $lcdproc_max_connect_errors) { lcdproc_warn("Start client procedure. Error counter: ($lcdproc_connect_errors)"); sleep(1); $lcd = fsockopen(LCDPROC_HOST, LCDPROC_PORT, $errno, $errstr, 10); stream_set_timeout($lcd, 0 , 25000); // Sets the socket timeout as 25ms if (!$lcd) { lcdproc_warn("Failed to connect to LCDd process $errstr ($errno)"); $lcdproc_connect_errors++; } else { build_interface($lcd); loop_status($lcd); fclose($lcd); } } if ($lcdproc_connect_errors >= $lcdproc_max_connect_errors) { lcdproc_warn("Too many errors, the client ends."); } ?></michele@nt2.it></seth.mos@xs4all.nl> -
Sorted out my display with thanks to Markus @ lcdproc.
If the following settings could be added to the config page when the "MtxOrb" driver is selected for lcdproc it would be great for Matrix Orbital users:
Type = { lcd | lkd | vfd | vkd }
hasAdjustableBacklight = { yes | no } -
Is there any known issues getting LCDProc running on the nano versions?
I converted my Firebox X700 to nano on CF instead of a HDD install and I cannot get the package to run correctly. The package installer shows success but I cannot get the display operational and on boot I get the following error:
Starting package LCDproc-dev... Warning: fopen(/usr/local/etc/LCDd.conf): failed to open stream: Read-only file system in /usr/local/pkg/lcdproc.inc on line 43 Bootup completeLine 43 is```
$handle = fopen($file, 'w');I had this working perfectly on the full HDD version. -
Hmm, that's odd.
The package system should take care of the filesystem.What do you see from this command:
mount -pSteve
-
This is the output
mount -p /dev/ufs/pfsense0 / ufs rw,sync,noatime 1 1 devfs /dev devfs rw 0 0 /dev/md0 /tmp ufs rw 2 2 /dev/md1 /var ufs rw 2 2 /dev/ufs/cf /cf ufs rw,sync,noatime 1 1 devfs /var/dhcpd/dev devfs rw 0 0Forgot to mention that this is on 2.1-Dev Everything else is working great including the OpenVPN Client Export package which is the only other package installed.
-
mdima,
I have an iMonLCD (OEM type) and I found that it should be supported on 0.5.5 package on this document:
http://lcdproc.sourceforge.net/docs/lcdproc-0-5-5-user.htmlHowever, after install the LCDProc 0.5.5 package, the support for iMon is missing.
Is there any way to bring it back?
-
@tix:
Forgot to mention that this is on 2.1-Dev
In that case it's untested and you're on your own. ;) Interesting to note though.
However there's clearly something not right because your filesystem is mounted RW and it should be RO for Nano installs. I think I may have read something about that recently, check the 2.1 sub forum.Steve
Edit: Did you test from the cli or using the Diag: Command: in the web gui?
@jimp:Diag > Command does switch to rw. The shell does not.
-
I have an iMonLCD (OEM type) and I found that it should be supported on 0.5.5 package
It appears that the iMon LCDproc driver requires a kernel module in order to work. The links provided in the document are all Linux based. If there isn't a FreeBSD module then it's very unlikely. :(
Steve
Edit: There may be hope: http://aopopov.home.xs4all.nl/imon/imon.html
-
is there a way to get a temperature screen added?
wondering if the code that is used for the system information widget/functions.inc.php could be helpful
function get_temp() { // switch(get_hwtype()) { // default: // return; // } // // return $ret; $temp_out = ""; exec("/sbin/sysctl dev.cpu.0.temperature | /usr/bin/awk '{ print $2 }' | /usr/bin/cut -d 'C' -f 1", $dfout); $temp_out = trim($dfout[0]); if ($temp_out == "") { exec("/sbin/sysctl hw.acpi.thermal.tz0.temperature | /usr/bin/awk '{ print $2 }' | /usr/bin/cut -d 'C' -f 1", $dfout); $temp_out = trim($dfout[0]); } return $temp_out; }thanks in-advance!
-
In that case it's untested and you're on your own. ;) Interesting to note though.
I was afraid of that :)
However there's clearly something not right because your filesystem is mounted RW and it should be RO for Nano installs. I think I may have read something about that recently, check the 2.1 sub forum.
I thought so too, but being new to the nano version, I wasn't sure…
Edit: Did you test from the cli or using the Diag: Command: in the web gui?
@jimp:Diag > Command does switch to rw. The shell does not.
CLI via SSH
I may end up grabbing the newest SNAP and starting over when I get a chance this weekend. I have some 'other' 2.1-dev issues that seem to be resolved on a clean install of the newest SNAPs….
edit: stephenw - you are right. There seems to be some issues with CF cards 'hanging' and causing slow response, mine included. http://forum.pfsense.org/index.php/topic,48256.0.html
-
Hello,
I am running the latest version of the driver package installed with the web UI.
The LCDproc server stops after a while setting "thanks for using pfsense" in the display.
Restarting the server works but the the behaviour occures after a while.I used the version (0.5.3 I think) without any problems.
Is there anyone who is interested in any logfiles (if so, which are of interest?).
If not, where can I get an older version of the package?Matthias
-
What LCD do you have? Which driver?
Edit: I see you're using a firebox.
I have seen this behaviour at start up but not during normal running. Does it coincide with an IP change or an interface going up or down, when packages are restarted?The old firebox lcd driver, which was 0.52 then 0.53, was not a pfSense package and as such it was only ever started once at boot. Currently there is an unresolved issue with the package being restarted multiple times during boot. This seems cause a problem with LCDd which cannot start/stop fast enough. On my box the daemon/client often ends up running incorrectly but after restarting manually it runs fine until I next reboot the box.
Steve
-
Here's a suggestion, while reading through some other bootup scripts I found this:
// Do not process while booting if($g['booting']) exit;Perhaps we could use this somehow to limit the number of reloads? Of course it could easily stop it loading at all. ::)
Steve
Just some news about this function if still needed.
I found a way to detect and prevent multiple starts during boot.
here is the code I'm including on packages I'm maintaining# detect boot process if (is_array($_POST)){ if (preg_match("/\w+/",$_POST['__csrf_magic'])) unset($boot_process); else $boot_process="on"; } if(is_process_running("NAME_OF_DAEMON_PROCESS_HERE") && isset($boot_process)) return; -
This looks good. I'll try and test it ASAP. Unfortunately my replacement X-Core has a dead backlight on the LCD. ::)
Hopefully I can combine my two boxes to make one reliable one. :)Are you including this code in the rc file?
Steve
-
Are you including this code in the rc file?
No, it's on sync function at inc package file.
on postfix.inc for example:
function sync_package_postfix() { global $config; # detect boot process if (is_array($_POST)){ if (preg_match("/\w+/",$_POST['__csrf_magic'])) unset($boot_process); else $boot_process="on"; } if(is_process_running("master") && isset($boot_process)) return; #check patch in /etc/inc/config. $relay_domains = ""; $transport = ""; . . . -
Still not working. :(
But it does correctly do something.May 7 18:24:10 php: : Creating rrd update script May 7 18:24:11 php: : Restarting/Starting all packages. May 7 18:24:11 php: lcdproc: Sync: Begin package sync May 7 18:24:12 php: lcdproc: Sync: End package sync May 7 18:24:12 php: : Resyncing OpenVPN instances for interface WAN. May 7 18:24:12 php: lcdproc: Sync: Begin package sync May 7 18:24:12 php: lcdproc: Sync: End package sync May 7 18:24:12 php: : Creating rrd update script May 7 18:24:12 php: : The command '/usr/bin/killall 'ntpd'' returned exit code '1', the output was 'killall: warning: kill -TERM 58686: No such process' May 7 18:24:12 dnsmasq[47718]: reading /etc/resolv.conf May 7 18:24:12 dnsmasq[47718]: using nameserver 192.168.1.1#53 May 7 18:24:12 dnsmasq[47718]: ignoring nameserver 127.0.0.1 - local interface May 7 18:24:12 dnsmasq[47718]: ignoring nameserver 127.0.0.1 - local interface May 7 18:24:13 php: : OpenNTPD is starting up. May 7 18:24:13 php: : pfSense package system has detected an ip change 0.0.0.0 -> ... Restarting packages. May 7 18:24:13 check_reload_status: Starting packages May 7 18:24:14 LCDd: LCDd version 0.5.5 starting May 7 18:24:14 LCDd: Using Configuration File: /usr/local/etc/LCDd.conf May 7 18:24:14 LCDd: Listening for queries on 127.0.0.1:13666 May 7 18:24:14 php: : IPSEC: One or more IPsec tunnel endpoints has changed its IP. Refreshing. May 7 18:24:15 php: lcdproc: Start client procedure. Error counter: (0) May 7 18:24:15 login: login on console as root May 7 18:24:15 sshlockout[53881]: sshlockout/webConfigurator v3.0 starting up May 7 18:24:16 LCDd: Connect from host 127.0.0.1:26764 on socket 11 May 7 18:24:16 check_reload_status: Reloading filter May 7 18:24:18 php: : Restarting/Starting all packages. May 7 18:24:18 php: lcdproc: Sync: Still Booting! May 7 18:24:18 php: lcdproc: Sync: Still Booting! May 7 18:24:21 LCDd: Client on socket 11 disconnected May 7 18:24:21 LCDd: sock_send: socket write error May 7 18:24:22 LCDd: Server shutting down on SIGTERM May 7 18:24:23 LCDd: LCDd version 0.5.5 starting May 7 18:24:23 LCDd: Using Configuration File: /usr/local/etc/LCDd.conf May 7 18:24:23 LCDd: sock_create_inet_socket: cannot bind to port 13666 at address 127.0.0.1 - Address already in use May 7 18:24:23 LCDd: sock_init: error creating socket - Address already in use May 7 18:24:23 LCDd: Critical error while initializing, abort. May 7 18:24:23 php: lcdproc: Start client procedure. Error counter: (0) May 7 18:24:34 php: lcdproc: Failed to connect to LCDd process Operation timed out (60) May 7 18:24:34 php: lcdproc: Start client procedure. Error counter: (1) May 7 18:24:40 php: /index.php: Successful webConfigurator login for user 'admin' from 192.168.1.111 May 7 18:24:40 php: /index.php: Successful webConfigurator login for user 'admin' from 192.168.1.111 May 7 18:24:45 php: lcdproc: Failed to connect to LCDd process Operation timed out (60) May 7 18:24:45 php: lcdproc: Start client procedure. Error counter: (2) May 7 18:24:56 php: lcdproc: Failed to connect to LCDd process Operation timed out (60) May 7 18:24:56 php: lcdproc: Start client procedure. Error counter: (3) May 7 18:25:07 apinger: Error while feeding rrdtool: Broken pipe May 7 18:25:07 php: lcdproc: Failed to connect to LCDd process Operation timed out (60) May 7 18:25:07 php: lcdproc: Too many errors, the client ends.It's still hard to get a grip on why this is failing.
The package is initially started and the LCDd daemon successfully connects to the client on socket 11. Then all packages are restarted. For some reason the LCDd instance fails to stop quickly and a new one tries to start but can't because port 13666 is in use. Then the first instance stops and the client times out. :-\Steve
-
Try this way:
function sync_package_lcdproc_screens() { # detect boot process if (is_array($_POST)){ if (preg_match("/\w+/",$_POST['__csrf_magic'])) sync_package_lcdproc(); } } function sync_package_lcdproc() { global $g; global $config; global $input_errors; # detect boot process if (is_array($_POST)){ if (!preg_match("/\w+/",$_POST['__csrf_magic'])) return; } lcdproc_notice("Sync: Begin package sync"); config_lock(); . . . -
The problem is not that it's syncing multiple times, it's that the package is started and then restarted multiple times.
Adding the boot detection in the sync function cuts this down, since it normally restarts the package after a sync if it's already running, but it's still a problem.Here's the function I'm testing with:
function sync_package_lcdproc_screens() { sync_package_lcdproc(); } function sync_package_lcdproc() { global $g; global $config; global $input_errors; # detect boot process and prevent syncing if (is_array($_POST)){ if (preg_match("/\w+/",$_POST['__csrf_magic'])) unset($boot_process); else $boot_process="on"; } if(is_process_running("LCDd") && isset($boot_process)){ lcdproc_notice("Sync: Still Booting!"); return; } lcdproc_notice("Sync: Begin package sync"); config_lock(); ....etcYou can see it in the logs once for each sync, lcdproc and lcdproc_screens:
May 7 18:24:18 php: : Restarting/Starting all packages. May 7 18:24:18 php: lcdproc: Sync: Still Booting! May 7 18:24:18 php: lcdproc: Sync: Still Booting!However it still goes on to restart lcdproc and for some reason that causes a problem during boot.
Restarting the package at any other time works fine.It would be better to prevent the package restarting during boot but the rc file is a shell script not a php file so I have no idea how that might be done. :-\
Thanks for looking at this.
Steve
