ADSL modem and PFsense 2.0
-
Hi all,
I have the follewing setup:
ISP -> 92.x.x.161 [WAN]Zyxel p660-D1 modem[lan] 92.x.x.161 -> 92.x.x.164 [WAN] Pfsense [LAN] 192.168.2.1 -> 2 servers
The modem works as a bridge. I have 5 IP addresses given by my ISP. I have to server with 2.1 addressen and DNS from my ISP. Works fine for accessing the internet from the servers.
The problem is the other way around. I cannot acces the Pfsense from an outsides network (Office, home) i set up an PPTP server with a user.
If im on the network 192.168.2.1 i can VPN with windows to that IP with the user i addes myself. Only i cannot acces the PPTP from outside.When i check with canyouseeme.org if my 1723 is open on my 92.x.x.164 it says its open.
I connect with VPN from windows to 92.x.x.164:1723 but no acces…
Thanks!
-
What rules you have on WAN and PPTP interfaces, how you have setup pptp server?
Screenshots would be nice to have if possible. -
I have Wan set to Allow Any. Same for PPTP.
PPTP rules:
WAN rules:
PPTP server:
-
This is the log. It looks like it trys al kind of ports to acces the PPTP on the PFSense?
-
Try to create two rules on wan
another with all any expect protocol, which is GRE and and another one with protocol TCP and destination port 1723 -
Did that. no luck! I can only still connect VPN from only within the LAN.
Made 2 rules like you said.
1- pass, WAN, GRE, any, any
2- pass WAN TCP, any, any, any port range PPTP to PPTP -
does your modem support pptp passthrough? is it enabled?