Getting errors in console on new install - FIXED



  • So I installed a nanoimg to an ALIX board (2d13) and Everything seemed to have installed fine, however, when I reboot the router and it comes back up, i'm getting some errors (below). Does anyone know what they mean?

    Thanks.

    
    ad0: FAILURE - READ status=51 <ready,dsc,error>error=10 <nid_not_found>LBA=7813119
    ad0: FAILURE - READ status=51 <ready,dsc,error>error=10 <nid_not_found>LBA=7813119
    ad0: FAILURE - READ status=51 <ready,dsc,error>error=10 <nid_not_found>LBA=7813119
    ad0: FAILURE - READ status=51 <ready,dsc,error>error=10 <nid_not_found>LBA=7813119
    ad0: FAILURE - READ status=51 <ready,dsc,error>error=10 <nid_not_found>LBA=7813119
    ad0: FAILURE - READ status=51 <ready,dsc,error>error=10 <nid_not_found>LBA=7813119
    ad0: FAILURE - READ status=51 <ready,dsc,error>error=10 <nid_not_found>LBA=7813119
    ad0: FAILURE - READ status=51 <ready,dsc,error>error=10 <nid_not_found>LBA=7813119
    ad0: FAILURE - READ status=51 <ready,dsc,error>error=10 <nid_not_found>LBA=7813119
    ad0: FAILURE - READ status=51 <ready,dsc,error>error=10 <nid_not_found>LBA=7813119
    ad0: FAILURE - READ status=51 <ready,dsc,error>error=10 <nid_not_found>LBA=7813119</nid_not_found></ready,dsc,error></nid_not_found></ready,dsc,error></nid_not_found></ready,dsc,error></nid_not_found></ready,dsc,error></nid_not_found></ready,dsc,error></nid_not_found></ready,dsc,error></nid_not_found></ready,dsc,error></nid_not_found></ready,dsc,error></nid_not_found></ready,dsc,error></nid_not_found></ready,dsc,error></nid_not_found></ready,dsc,error> 
    


  • never mind… found my answer...

    http://doc.pfsense.org/index.php/DMA_and_LBA_Errors


Locked