Is VLAN needed for pfSense
I am new to pfSense and noob, use since last Years FreeBSD.
I'm confused with Configuration for VLAN and pfSense, have googled since weeks, but no found for single WAN and single LAN Configuation, multi WAN, multi LAN is described
Have all read, but…
Installed newest pfSense
8.1-RELEASE-p6 FreeBSD 8.1-RELEASE-p6 #0: Mon Dec 12 18:15:35 EST 2011 root@FreeBSD_8.0_pfSense_2.0-AMD64.snaps.pfsense.org:/usr/obj./usr/pfSensesrc/src/sys/pfSense_SMP.8 amd64
Motorola Netopia 3347NWG, with 4 Ports
HP ProLiant N40L, Turion II Neo N40L, 1x 250GB, Micro-Tower, for pfSense
Ethernet Card, bge Driver, WAN
Embedded NC107i PCI Express Gigabit Ethernet Server Adapter
Intel EXPI9301CTBLK, 1000CT Gigabit Adapter PCIe, em Driver, LAN
Netgear ProSafe GS108E, 8 Port Gigabit Switch
Have 3 PC, all FreeBSD, and VoIP Phone.
Default is now Gateway ADSL Modem IP Address 192.168.1.110
pfSense LAN WebGUI is 192.168.1.101
pfSense WAN is 192.168.1.100
PCs IP Address are
PC2 192.168.1.2, Switch Port 2
PC3 192.168.1.3, Switch Port 3
PC4 192.168.1.4, Switch Port 4
VoIP Phone 192.168.1.8, Switch Port 8
Naturally can set DHCP Server on LAN 192.168.1.2-192.168.1.99
Wish only working pfSense with one WAN, one LAN, one Lan Net.
Do I need to separte LAN and DMZ? All mine PC are on LAN, and this is DMZ I think.
Which WAN Type should I use PPPoE (ADSL Modem) or something others?
Do I need VLAN and which Configuration for WAN, LAN eventually VLAN is working here?
What must I use for working Internet for mine FreeBSD PCs in
Now is there
ifconfig_re0="inet 192.168.1.2 netmask 255.255.255.0"
Thanks in Advance
Perry last edited by
No just change subnet on lan to something like 192.168.2.0/24
I can't change mine LAN Subnet from 192.168.1.0/24 many Configurations and Scripts have this 192.168.1.2-8.
But should I change WAN Subnet to 192.168.2.0/24, perhaps?
Perry last edited by
Yes do that
Have switched better all mine PC and VoIP to LAN Subnet 192.168.2.0/2 and use LAN Gateway 192.168.2.101 from HP pfSense.
Works excellently. Now must I more learn about pfSense.
No PPPoE, no DHCP, all statically.
ifconfig_msk0="inet 192.168.2.3 netmask 255.255.255.0"