Arpresolve: can't allocate route for 192.168.50.254
-
Hi all, install pfsense 1.0.1, update to lastest snapshot and don´t work my OPT1, i set this with 192.168.50.250 without gw, I have static route for lan 192.168.50.0 with gw 192.168.50.254, when reset machine and look at route table:
default 201.14.143.254 UGS 1 29 1492 ng0
127.0.0.1 127.0.0.1 UH 0 0 16384 lo0
192.168.4 link#2 UC 0 0 1500 rl0
192.168.4.2 00:13:d4:0c:2d:0e UHLW 1 115 1500 rl0 997
192.168.50 192.168.50.254 UGS 0 2 1500 rl1
201.14.128.22 lo0 UHS 0 0 16384 lo0
201.14.143.254 201.14.128.22 UH 1 23 1492 ng0ok, when enter in opt1 settings and something click in save configs the route table shows:
default 201.14.143.254 UGS 0 109 1492 ng0
127.0.0.1 127.0.0.1 UH 0 0 16384 lo0
192.168.4 link#2 UC 0 0 1500 rl0
192.168.4.2 00:13:d4:0c:2d:0e UHLW 1 428 1500 rl0 697
192.168.50 link#3 UC 0 0 1500 rl1 <<<- look
201.14.128.22 lo0 UHS 0 0 16384 lo0
201.14.143.254 201.14.128.22 UH 1 50 1492 ng0and my route works, why ? in version beta 0.89 its works fine, but the hd has dead… reboot machine the problem persists, i have to go on interfaces, opt1, click save and go! route ready!
Please help me!
-
You don't need (and never needed) static routes for locally attached subnets. Delete these routes and it should simply work (if your firewallrules are set up correct).
-
ok thanks hoba, now works, sorry for this, noob question ::)