Pantech UML290
-
I am trying to get a Verizon 4G connection working, and having no luck. This link would imply that it "just works":
http://doc.pfsense.org/index.php/Verizon_UML290I assigned my ppp interface to the device cuaU0, although ls /dev/cu* shows a couple other devices - which are not available in the ppp config page.
When I try to connect I just get this in my ppp log:
Feb 24 23:28:19 ppp: [opt3_link0] chat: Detected Hayes compatible modem. Feb 24 23:28:19 ppp: [opt3_link0] chat: Dialing server at *99***3#... Feb 24 23:28:19 ppp: [opt3_link0] chat: The remote modem did not answer. Feb 24 23:28:19 ppp: [opt3_link0] MODEM: chat script failed Feb 24 23:28:19 ppp: [opt3_link0] Link: DOWN event Feb 24 23:28:19 ppp: [opt3_link0] LCP: Down event Feb 24 23:28:19 ppp: [opt3_link0] Link: reconnection attempt 4 in 2 secondsI found this http://ubuntuforums.org/showthread.php?s=274f1bef08b7833c32a7a393c9068f92&t=1665287&page=2 showing different logins used for 3G vs 4G, I do not currently have 4G coverage, so I also tried connecting with the #777 dial string - any ideas?
-
i had a feeling - had to hard set the modem to 3G for it to work, apparently theres no facility for auto-detecting the network.
Use the Pantech Modem Utility to hard code 3G in to the firmware - per this article:
http://www.evdoinfo.com/content/view/3492/64/
and used #777 as the dial string - will hunt for a 4G tower to verify that.
-
My UML290 works fine without changing anything on 4G, though from the sounds of it you don't have 4G coverage, which is probably why. I know that card has similar requirements on other routers with connectivity where no 4G exists.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginPrivacy Policy · Cookie Policy