INTEL Pro Wireless 2200BG 4gnano image install problems



  • Mar 3 09:17:21 php: /interfaces.php: Cloning new wireless interface iwi0_wlan0
    Mar 3 09:17:21 kernel: iwi_bss: could not load firmware image, error 2
    Mar 3 09:17:21 php: /interfaces.php: Failed to clone interface iwi0 with error code 1, output ifconfig: SIOCIFCREATE2: Input/output error
    Mar 3 09:17:21 kernel: iwi0: could not load firmware

    how to i can fix it.

    PFSENSE rc 2.01. 4g nanobsd
    alix 2d13 board



  • See the second paragraph in the Description section of the man page for iwi:
    http://www.freebsd.org/cgi/man.cgi?query=iwi&apropos=0&sektion=0&manpath=FreeBSD+9.0-RELEASE&arch=default&format=html



  • is not solution for my problems anythink in in your link

    there is a firmware load problem

    added loader.conf

    if_iwi_load="YES"
    wlan_load="YES"
    firmware_load="YES"
    iwi_bss_load="YES"
    iwi_ibss_load="YES"
    iwi_monitor_load="YES"
    legal.intel_iwi.license_ack=1
    legal.intel_ipw.license_ack=1
    legal.intel_wpi.license_ack=1

    Mar 4 00:02:11 	kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    Mar 4 00:02:11 	kernel: The Regents of the University of California. All rights reserved.
    Mar 4 00:02:11 	kernel: FreeBSD is a registered trademark of The FreeBSD Foundation.
    Mar 4 00:02:11 	kernel: FreeBSD 8.1-RELEASE-p6 #0: Mon Dec 12 18:59:41 EST 2011
    Mar 4 00:02:11 	kernel: root@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj./usr/pfSensesrc/src/sys/pfSense_wrap.8.i386 i386
    Mar 4 00:02:11 	kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
    Mar 4 00:02:11 	kernel: CPU: Geode(TM) Integrated Processor by AMD PCS (498.05-MHz 586-class CPU)
    Mar 4 00:02:11 	kernel: Origin = "AuthenticAMD" Id = 0x5a2 Family = 5 Model = a Stepping = 2
    Mar 4 00:02:11 	kernel: Features=0x88a93d <fpu,de,pse,tsc,msr,cx8,sep,pge,cmov,clflush,mmx>Mar 4 00:02:11 	kernel: AMD Features=0xc0400000 <mmx+,3dnow!+,3dnow!>Mar 4 00:02:11 	kernel: real memory = 268435456 (256 MB)
    Mar 4 00:02:11 	kernel: avail memory = 243433472 (232 MB)
    Mar 4 00:02:11 	kernel: pnpbios: Bad PnP BIOS data checksum
    Mar 4 00:02:11 	kernel: netisr_init: forcing maxthreads to 1 and bindthreads to 0 for device polling
    Mar 4 00:02:11 	kernel: wlan: mac acl policy registered
    Mar 4 00:02:11 	kernel: K6-family MTRR support enabled (2 registers)
    Mar 4 00:02:11 	kernel: ACPI Error: A valid RSDP was not found (20100331/tbxfroot-309)
    Mar 4 00:02:11 	kernel: ACPI: Table initialisation failed: AE_NOT_FOUND
    Mar 4 00:02:11 	kernel: ACPI: Try disabling either ACPI or apic support.
    Mar 4 00:02:11 	kernel: cryptosoft0: <software crypto=""> on motherboard
    Mar 4 00:02:11 	kernel: padlock0: No ACE support.
    Mar 4 00:02:11 	kernel: pcib0: <host to="" pci="" bridge=""> pcibus 0 on motherboard
    Mar 4 00:02:11 	kernel: pci0: <pci bus=""> on pcib0
    Mar 4 00:02:11 	kernel: Geode LX: PC Engines ALIX.2 v0.99h tinyBIOS V1.4a (C)1997-2007
    Mar 4 00:02:11 	kernel: pci0: <encrypt decrypt,="" entertainment="" crypto=""> at device 1.2 (no driver attached)
    Mar 4 00:02:11 	kernel: vr0: <via 10="" vt6105m="" rhine="" iii="" 100basetx=""> port 0x1000-0x10ff mem 0xe0000000-0xe00000ff irq 10 at device 9.0 on pci0
    Mar 4 00:02:11 	kernel: vr0: Quirks: 0x2
    Mar 4 00:02:11 	kernel: vr0: Revision: 0x96
    Mar 4 00:02:11 	kernel: miibus0: <mii bus=""> on vr0
    Mar 4 00:02:11 	kernel: ukphy0: <generic ieee="" 802.3u="" media="" interface=""> PHY 1 on miibus0
    Mar 4 00:02:11 	kernel: ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
    Mar 4 00:02:11 	kernel: vr0: [ITHREAD]
    Mar 4 00:02:11 	kernel: vr1: <via 10="" vt6105m="" rhine="" iii="" 100basetx=""> port 0x1400-0x14ff mem 0xe0040000-0xe00400ff irq 11 at device 10.0 on pci0
    Mar 4 00:02:11 	kernel: vr1: Quirks: 0x2
    Mar 4 00:02:11 	kernel: vr1: Revision: 0x96
    Mar 4 00:02:11 	kernel: miibus1: <mii bus=""> on vr1
    Mar 4 00:02:11 	kernel: ukphy1: <generic ieee="" 802.3u="" media="" interface=""> PHY 1 on miibus1
    Mar 4 00:02:11 	kernel: ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
    Mar 4 00:02:11 	kernel: vr1: [ITHREAD]
    Mar 4 00:02:11 	kernel: vr2: <via 10="" vt6105m="" rhine="" iii="" 100basetx=""> port 0x1800-0x18ff mem 0xe0080000-0xe00800ff irq 15 at device 11.0 on pci0
    Mar 4 00:02:11 	kernel: vr2: Quirks: 0x2
    Mar 4 00:02:11 	kernel: vr2: Revision: 0x96
    Mar 4 00:02:11 	kernel: miibus2: <mii bus=""> on vr2
    Mar 4 00:02:11 	kernel: ukphy2: <generic ieee="" 802.3u="" media="" interface=""> PHY 1 on miibus2
    Mar 4 00:02:11 	kernel: ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
    Mar 4 00:02:11 	kernel: vr2: [ITHREAD]
    Mar 4 00:02:11 	kernel: iwi0: <intel(r) pro="" wireless="" 2200bg=""> mem 0xe00c0000-0xe00c0fff irq 9 at device 12.0 on pci0
    Mar 4 00:02:11 	kernel: iwi0: [ITHREAD]
    Mar 4 00:02:11 	kernel: isab0: <pci-isa bridge=""> port 0x6000-0x6007,0x6100-0x61ff,0x6200-0x623f,0x9d00-0x9d7f,0x9c00-0x9c3f at device 15.0 on pci0
    Mar 4 00:02:11 	kernel: isa0: <isa bus=""> on isab0
    Mar 4 00:02:11 	kernel: atapci0: <amd cs5536="" udma100="" controller=""> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 15.2 on pci0
    Mar 4 00:02:11 	kernel: ata0: <ata 0="" channel=""> on atapci0
    Mar 4 00:02:11 	kernel: ata0: [ITHREAD]
    Mar 4 00:02:11 	kernel: ata1: <ata 1="" channel=""> on atapci0
    Mar 4 00:02:11 	kernel: ata1: [ITHREAD]
    Mar 4 00:02:11 	kernel: ohci0: <ohci (generic)="" usb="" controller=""> mem 0xefffe000-0xefffefff irq 12 at device 15.4 on pci0
    Mar 4 00:02:11 	kernel: ohci0: [ITHREAD]
    Mar 4 00:02:11 	kernel: usbus0: <ohci (generic)="" usb="" controller=""> on ohci0
    Mar 4 00:02:11 	kernel: ehci0: <amd cs5536="" (geode)="" usb="" 2.0="" controller=""> mem 0xefffd000-0xefffdfff irq 12 at device 15.5 on pci0
    Mar 4 00:02:11 	kernel: ehci0: [ITHREAD]
    Mar 4 00:02:11 	kernel: usbus1: EHCI version 1.0
    Mar 4 00:02:11 	kernel: usbus1: <amd cs5536="" (geode)="" usb="" 2.0="" controller=""> on ehci0
    Mar 4 00:02:11 	kernel: cpu0 on motherboard
    Mar 4 00:02:11 	kernel: orm0: <isa option="" rom=""> at iomem 0xe0000-0xea7ff pnpid ORM0000 on isa0
    Mar 4 00:02:11 	kernel: atrtc0: <at real="" time="" clock=""> at port 0x70 irq 8 on isa0
    Mar 4 00:02:11 	kernel: ppc0: parallel port not found.
    Mar 4 00:02:11 	kernel: uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
    Mar 4 00:02:11 	kernel: uart0: [FILTER]
    Mar 4 00:02:11 	kernel: uart0: console (9600,n,8,1)
    Mar 4 00:02:11 	kernel: uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
    Mar 4 00:02:11 	kernel: uart1: [FILTER]
    Mar 4 00:02:11 	kernel: Timecounter "TSC" frequency 498053454 Hz quality 800
    Mar 4 00:02:11 	kernel: Timecounters tick every 10.000 msec
    Mar 4 00:02:11 	kernel: IPsec: Initialized Security Association Processing.
    Mar 4 00:02:11 	kernel: usbus0: 12Mbps Full Speed USB v1.0
    Mar 4 00:02:11 	kernel: usbus1: 480Mbps High Speed USB v2.0
    Mar 4 00:02:11 	kernel: ugen0.1: <amd> at usbus0
    Mar 4 00:02:11 	kernel: uhub0: <amd 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usbus0
    Mar 4 00:02:11 	kernel: ugen1.1: <amd> at usbus1
    Mar 4 00:02:11 	kernel: uhub1: <amd 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr=""> on usbus1
    Mar 4 00:02:11 	kernel: ad0: 3811MB <cf card="" ver6.04=""> at ata0-master PIO4
    Mar 4 00:02:11 	kernel: Root mount waiting for: usbus1 usbus0
    Mar 4 00:02:11 	kernel: uhub0: 4 ports with 4 removable, self powered
    Mar 4 00:02:11 	kernel: Root mount waiting for: usbus1
    Mar 4 00:02:11 	kernel: uhub1: 4 ports with 4 removable, self powered
    Mar 4 00:02:11 	kernel: Trying to mount root from ufs:/dev/ufs/pfsense0
    Mar 4 00:02:11 	kernel: iwi_bss: could not load firmware image, error 2
    Mar 4 00:02:11 	kernel: iwi0: could not load firmware
    Mar 4 00:02:11 	kernel: iwi0: timeout waiting for (null) firmware initialization to complete
    Mar 4 00:02:11 	kernel: iwi0: could not load boot firmware (null)
    Mar 4 00:02:13 	apinger: Starting Alarm Pinger, apinger(32193)
    Mar 4 00:02:15 	php: : ROUTING: setting default route to 192.168.2.1
    Mar 4 00:02:17 	dhcpd: Internet Systems Consortium DHCP Server 4.2.3
    Mar 4 00:02:17 	dhcpd: Copyright 2004-2011 Internet Systems Consortium.
    Mar 4 00:02:17 	dhcpd: All rights reserved.
    Mar 4 00:02:17 	dhcpd: For info, please visit https://www.isc.org/software/dhcp/
    Mar 4 00:02:18 	check_reload_status: Updating all dyndns
    Mar 4 00:02:18 	dnsmasq[45450]: started, version 2.55 cachesize 10000
    Mar 4 00:02:18 	dnsmasq[45450]: compile time options: IPv6 GNU-getopt no-DBus I18N DHCP TFTP
    Mar 4 00:02:18 	dnsmasq[45450]: reading /etc/resolv.conf
    Mar 4 00:02:18 	dnsmasq[45450]: using nameserver 195.175.39.39#53
    Mar 4 00:02:18 	dnsmasq[45450]: using nameserver 195.175.39.40#53
    Mar 4 00:02:18 	dnsmasq[45450]: using nameserver 192.168.2.1#53
    Mar 4 00:02:18 	dnsmasq[45450]: ignoring nameserver 127.0.0.1 - local interface
    Mar 4 00:02:18 	dnsmasq[45450]: ignoring nameserver 127.0.0.1 - local interface
    Mar 4 00:02:18 	dnsmasq[45450]: read /etc/hosts - 2 addresses
    Mar 4 00:02:20 	php: : OpenNTPD is starting up.
    Mar 4 00:02:21 	php: : rc.newwanip: Informational is starting vr1.
    Mar 4 00:02:21 	php: : rc.newwanip: on (IP address: 192.168.2.2) (interface: wan) (real interface: vr1).
    Mar 4 00:02:21 	php: : ROUTING: setting default route to 192.168.2.1
    Mar 4 00:02:21 	apinger: Exiting on signal 15.
    Mar 4 00:02:23 	check_reload_status: Restarting ipsec tunnels
    Mar 4 00:02:23 	check_reload_status: Reloading filter
    Mar 4 00:02:23 	apinger: Starting Alarm Pinger, apinger(62230)
    Mar 4 00:02:26 	php: /index.php: Successful webConfigurator login for user 'admin' from 192.168.1.100
    Mar 4 00:02:26 	php: /index.php: Successful webConfigurator login for user 'admin' from 192.168.1.100
    Mar 4 00:02:26 	sshlockout[258]: sshlockout/webConfigurator v3.0 starting up
    Mar 4 00:02:28 	php: : Resyncing OpenVPN instances for interface WAN.
    Mar 4 00:02:28 	php: : Creating rrd update script
    Mar 4 00:02:29 	php: : Creating rrd update script
    Mar 4 00:02:33 	php: : The command '/usr/bin/killall 'ntpd'' returned exit code '1', the output was 'killall: warning: kill -TERM 51746: No such process'
    Mar 4 00:02:33 	php: : Restarting/Starting all packages.
    Mar 4 00:02:35 	dnsmasq[45450]: reading /etc/resolv.conf
    Mar 4 00:02:35 	dnsmasq[45450]: using nameserver 195.175.39.39#53
    Mar 4 00:02:35 	dnsmasq[45450]: using nameserver 195.175.39.40#53
    Mar 4 00:02:35 	dnsmasq[45450]: using nameserver 192.168.2.1#53
    Mar 4 00:02:35 	dnsmasq[45450]: ignoring nameserver 127.0.0.1 - local interface
    Mar 4 00:02:35 	dnsmasq[45450]: ignoring nameserver 127.0.0.1 - local interface
    Mar 4 00:02:35 	php: : OpenNTPD is starting up.
    Mar 4 00:02:35 	php: : pfSense package system has detected an ip change 0.0.0.0 -> ... Restarting packages.
    Mar 4 00:02:35 	check_reload_status: Starting packages
    Mar 4 00:02:36 	login: login on console as root
    Mar 4 00:02:37 	php: : IPSEC: One or more IPsec tunnel endpoints has changed its IP. Refreshing.
    Mar 4 00:02:41 	check_reload_status: Syncing firewall
    Mar 4 00:02:42 	check_reload_status: Reloading filter
    Mar 4 00:02:43 	php: : Restarting/Starting all packages.
    Mar 4 00:02:48 	check_reload_status: Syncing firewall
    Mar 4 00:02:48 	php: /interfaces_assign.php: Creating rrd update script
    Mar 4 00:03:20 	check_reload_status: Syncing firewall
    Mar 4 00:03:23 	apinger: Error while feeding rrdtool: Broken pipe
    Mar 4 00:03:25 	check_reload_status: Syncing firewall
    Mar 4 00:03:25 	php: /interfaces_assign.php: Creating rrd update script
    Mar 4 00:03:54 	php: /interfaces_wireless_edit.php: Cloning new wireless interface iwi0_wlan1
    Mar 4 00:03:54 	kernel: iwi_bss: could not load firmware image, error 2
    Mar 4 00:03:54 	php: /interfaces_wireless_edit.php: Failed to clone interface iwi0 with error code 1, output ifconfig: SIOCIFCREATE2: Input/output error
    Mar 4 00:03:54 	kernel: iwi0: could not load firmware
    Mar 4 00:04:02 	php: /interfaces.php: Cloning new wireless interface iwi0_wlan0
    Mar 4 00:04:02 	kernel: iwi_bss: could not load firmware image, error 2
    Mar 4 00:04:02 	php: /interfaces.php: Failed to clone interface iwi0 with error code 1, output ifconfig: SIOCIFCREATE2: Input/output error
    Mar 4 00:04:02 	kernel: iwi0: could not load firmware
    Mar 4 00:04:17 	php: /interfaces.php: Cloning new wireless interface iwi0_wlan0
    Mar 4 00:04:17 	kernel: iwi_bss: could not load firmware image, error 2
    Mar 4 00:04:17 	php: /interfaces.php: Failed to clone interface iwi0 with error code 1, output ifconfig: SIOCIFCREATE2: Input/output error
    Mar 4 00:04:17 	kernel: iwi0: could not load firmware
    Mar 4 00:04:23 	apinger: /usr/local/bin/rrdtool respawning too fast, waiting 300s.
    Mar 4 00:04:24 	php: /interfaces.php: Cloning new wireless interface iwi0_wlan0
    Mar 4 00:04:24 	php: /interfaces.php: Failed to clone interface iwi0 with error code 1, output ifconfig: SIOCIFCREATE2: Input/output error
    Mar 4 00:04:24 	kernel: iwi_bss: could not load firmware image, error 2
    Mar 4 00:04:24 	kernel: iwi0: could not load firmware
    Mar 4 00:04:25 	check_reload_status: Syncing firewall
    Mar 4 00:04:25 	php: /interfaces.php: Cloning new wireless interface iwi0_wlan0
    Mar 4 00:04:25 	kernel: iwi_bss: could not load firmware image, error 2
    Mar 4 00:04:25 	php: /interfaces.php: Failed to clone interface iwi0 with error code 1, output ifconfig: SIOCIFCREATE2: Input/output error
    Mar 4 00:04:25 	kernel: iwi0: could not load firmware
    Mar 4 00:04:27 	php: /interfaces.php: Cloning new wireless interface iwi0_wlan0
    Mar 4 00:04:27 	kernel: iwi_bss: could not load firmware image, error 2
    Mar 4 00:04:27 	kernel: iwi0: could not load firmware
    Mar 4 00:04:27 	php: /interfaces.php: Failed to clone interface iwi0 with error code 1, output ifconfig: SIOCIFCREATE2: Input/output error
    Mar 4 00:04:27 	php: /interfaces.php: Cloning new wireless interface iwi0_wlan0
    Mar 4 00:04:27 	php: /interfaces.php: Failed to clone interface iwi0 with error code 1, output ifconfig: SIOCIFCREATE2: Input/output error
    Mar 4 00:04:27 	kernel: iwi_bss: could not load firmware image, error 2
    Mar 4 00:04:27 	kernel: iwi0: could not load firmware
    Mar 4 00:04:27 	php: /interfaces.php: The command '/sbin/ifconfig iwi0_wlan0 mode ''' returned exit code '1', the output was 'ifconfig: interface iwi0_wlan0 does not exist'
    Mar 4 00:04:27 	php: /interfaces.php: The command '/sbin/ifconfig iwi0_wlan0 up mode '' ssid 'TEST' protmode 'off' channel any -mediaopt hostap -mediaopt adhoc -hidessid -pureg -puren -apbridge -mediaopt turbo -wme authmode open wepmode off ' returned exit code '1', the output was 'ifconfig: interface iwi0_wlan0 does not exist'
    Mar 4 00:04:30 	kernel: iwi0: timeout waiting for (null) firmware initialization to complete
    Mar 4 00:04:30 	kernel: iwi0: could not load boot firmware (null)
    Mar 4 00:04:32 	dnsmasq[45450]: exiting on receipt of SIGTERM
    Mar 4 00:04:33 	dnsmasq[32818]: started, version 2.55 cachesize 10000
    Mar 4 00:04:33 	dnsmasq[32818]: compile time options: IPv6 GNU-getopt no-DBus I18N DHCP TFTP
    Mar 4 00:04:33 	dnsmasq[32818]: reading /etc/resolv.conf
    Mar 4 00:04:33 	dnsmasq[32818]: using nameserver 195.175.39.39#53
    Mar 4 00:04:33 	dnsmasq[32818]: using nameserver 195.175.39.40#53
    Mar 4 00:04:33 	dnsmasq[32818]: using nameserver 192.168.2.1#53
    Mar 4 00:04:33 	dnsmasq[32818]: ignoring nameserver 127.0.0.1 - local interface
    Mar 4 00:04:33 	dnsmasq[32818]: ignoring nameserver 127.0.0.1 - local interface
    Mar 4 00:04:33 	dnsmasq[32818]: read /etc/hosts - 2 addresses
    Mar 4 00:04:34 	dhcpd: Internet Systems Consortium DHCP Server 4.2.3
    Mar 4 00:04:34 	dhcpd: Copyright 2004-2011 Internet Systems Consortium.
    Mar 4 00:04:34 	dhcpd: All rights reserved.
    Mar 4 00:04:34 	dhcpd: For info, please visit https://www.isc.org/software/dhcp/
    Mar 4 00:04:34 	check_reload_status: updating dyndns opt2
    Mar 4 00:04:36 	apinger: Exiting on signal 15.
    Mar 4 00:04:37 	check_reload_status: Reloading filter
    Mar 4 00:04:37 	apinger: Starting Alarm Pinger, apinger(38917)
    Mar 4 00:04:37 	php: /interfaces.php: Creating rrd update script
    Mar 4 00:04:38 	php: /interfaces.php: Cloning new wireless interface iwi0_wlan0
    Mar 4 00:04:38 	php: /interfaces.php: Failed to clone interface iwi0 with error code 1, output ifconfig: SIOCIFCREATE2: Input/output error
    Mar 4 00:04:38 	kernel: iwi_bss: could not load firmware image, error 2
    Mar 4 00:04:38 	kernel: iwi0: could not load firmware
    Mar 4 00:05:37 	apinger: Error while feeding rrdtool: Broken pipe</cf></amd></amd></amd></amd></at></isa></amd></amd></ohci></ohci></ata></ata></amd></isa></pci-isa></intel(r)></generic></mii></via></generic></mii></via></generic></mii></via></encrypt></pci></host></software></mmx+,3dnow!+,3dnow!></fpu,de,pse,tsc,msr,cx8,sep,pge,cmov,clflush,mmx>
    




  • I don't have any Intel WiFi devices so I'm unable to provide a procedure I know works.

    @SlowGrind:

    Try this link…

    http://forum.pfsense.org/index.php/topic,13427.0.html

    @technical:

    I read the link and it is not solution for my problems anythink in in your link

    The link provided what seemed to be a necessary condition for loading the firmware (acceptance of the licence). I din't intend to claim that would be sufficient!

    @technical:

    added loader.conf

    You should add to /boot/loader.conf.local since that file survives firmware upgrades.

    @technical:

    if_iwi_load="YES"
    wlan_load="YES"
    firmware_load="YES"

    These appear unnecessary since they are apparently already in the kernel.

    @technical:

    iwi_bss_load="YES"
    iwi_ibss_load="YES"
    iwi_monitor_load="YES"

    I don't know the kernel build options so can't readily say if the corresponding modules are already in the kernel (in which case these lines would not be necessary) or if they are supposed to dynamically loaded as kernel modules (such a load would fail on my recent 2.0.1 install since the corresponding kernel modules (iwi_bss.ko, iwi_ibss.ko and iwi_monitor.ko) are not present in the file system).

    @technical:

    legal.intel_iwi.license_ack=1

    The man page I linked to says this is necessary.

    @technical:

    legal.intel_ipw.license_ack=1
    legal.intel_wpi.license_ack=1

    These appear unnecessary unless you are also using other Intel WiFi devices.



  • @SlowGrind:

    Try this link…

    http://forum.pfsense.org/index.php/topic,13427.0.html

    *.ko files download link broken.

    @wallabybob

    legal.intel_ipw.license_ack=1
    legal.intel_wpi.license_ack=1

    i ll added because system reports give the errors.

    how to find iwi_bss.ko, iwi_ibss.ko and iwi_monitor.ko files or how to install new firmware ?


Log in to reply