OpenVPN site-to-site issue



  • i have fully read the pfsense documents
    there was mention site to site is very easy setup and i followed as it as. **SERVER SIDE

    my settings is
    Server mode - peer to peer shared key
    protocol - udp
    interface - wan
    Shared Key - automatic

    tunnel network 10.0.8.1/30
    local network  172.16.0.0/16
    remote network 192.168.0.0/16

    CLIENT SIDE

    Server mode - peer to peer shared key
    protocol - udp
    interface - wan
    Shared Key - PASTE SERVER CERTIFICARE

    Server host or address - my static public ip

    tunnel network 10.0.8.2/30
    remote network 172.16.0.0/16

    save

    some times server status show up and some times server status show down
    i could not understand what i do.
    when server is show up
    then i have try to ping front end pfsense lan ip its pinging
    but not ping lan pc's

    i already create a wan rule source any protocol any destination any

    still m failed
    pls help and guide,

    what should i do to its working and where i wrong configuration.

    Thanks

    Mohan
    +91 98260 61122
    mohanrao83@gmail.com**


Log in to reply