Installing on Soekris w/ built-in CF

[pcatiprodotnet]

I was unable to locate a HowTo…  Do easy walkthrough instructions exist for installing pfSense-embedded through the ethernet interface (not serial) on Soekris models which have only built-in/non-removable CF ?
http://www.soekris.com/net4826.htm
[update] I suppose I could use the following method, and update that CD with the newest pfsense…
http://pyramid.metrix.net/trac/wiki/InstallingPyramid/PxeBootLiveCD
Thank you, -pc

[hoba]

As this system only has 1 sis nic it will come up with the assign interface dialog at boot when using the default config so you have to assign interfaces via serial console first unless you change the config in your flashfile so the device is accessable directly at the nic on bootup.