Freenas, samba on pfsense
-
Can I do this? This is for a home system, not the USS enterprise.
Wondering if I could do this since my wndr3700 has a lousy 10 MB/s speeds for USB, pathetic. -
at the end of line, it's your system ;)
you can do it, but only if you have know-how(I don't have it).
-
What hardware are you running on? It will be easier if you can virtualize each one rather than try to get pf sense to run them all.
-
Not fast enough for that. I was wanting to use a slow 2.0ghz p4.
I don't think getting samba on would be that hard would it?
-
The hardware sounds fine for virtualization, but you really have to try to get an idea for sure.
Regarding installing Samba, well, you have to know a little about FreeBSD and how to deal with install problems which might crop up without everything going belly up. Good luck and let us know if it works. -
I have to agree that you probably could virtualise pfSense on that hardware with CPU cycles to spare.
My own box is a P4-M underclocked to 1.2GHz and it handles my loadbalanced WANs (60Mbps total) with ease.Steve
