Build fails - ERROR Building libtool



  • Try update your ports (with ./update_git_repos.sh) - there were some changes made yesterday which should fix the problems you were seeing.



  • @wagonza:

    Try update your ports (with ./update_git_repos.sh) - there were some changes made yesterday which should fix the problems you were seeing.

    I've just tried and it stopped at "Executing buildports.RELENG_2_0"
    I've updated ports, source code and pfsense-tools but still not working.



  • It should eventually continue after that, how long did you leave it for?



  • @wagonza:

    It should eventually continue after that, how long did you leave it for?

    Over 1 hour.



  • @ardunio:

    Over 1 hour.

    heh, ok no it should not be that long. Try do a clean_build.sh, apply_kernel_patches.sh and re-run the build_pfPorts.sh



  • I have tried a couple of times and I had errors on build, but since I have built once, the errors doesn't seems stop a successful build of the iso. I am also still skipping build where when building 2.1, I don't skip. On re-building the iso and updates on 2.1, all the ports are rebuilt and forced into registering (effectively doing a port upgrade). 2.0 apparently sees that it is already installed and does not re-compile. The problem is that with the customizations and patches to the system, it makes any normal FreeBSD port upgrade method useless.
    I am currently build 2.1 images in the virtual server and will paste the 2.0.1 build errors in here at a later time.



  • @wagonza:

    heh, ok no it should not be that long. Try do a clean_build.sh, apply_kernel_patches.sh and re-run the build_pfPorts.sh

    I did but had lot of errors again.



  • Well … the same errors are now present in the 2.1 builds. Yet it still builds ISOs and updates.

    
    >>> Overlaying pfPorts /home/pfsense/tools/builder_scripts/../../tools/pfPorts/unbound to /usr/ports/dns/unbound and building...
    >>> gmake(gmake-3.82)...already built on this run.  Skipping.
    >>> libevent(libevent-1.4.14b_2)...already built on this run.  Skipping.
    >>> gmake(gmake-3.82)...already built on this run.  Skipping.
    >>> libtool(libtool-2.4.2)...already built on this run.  Skipping.
    >>> Building ldns(ldns-1.6.12)...Done.
    >>> expat2(expat-2.0.1_2)...already built on this run.  Skipping.
    >>> Building unbound(unbound-1.4.16)...Done.
    >>> Ports with failures:        3
    >>> Building libart_lgpl(libart_lgpl-2.3.21,1)...ERROR!
    >>> Building freetype2(freetype2-2.4.2)...ERROR!
    >>> Building olsrd(olsrd-0.5.6.r7)...ERROR!
    >>> Building athstats...main.c: In function 'getfmt':
    main.c:73: warning: implicit declaration of function 'strcasecmp'
    Done!
    
    


  • @podilarius:

    Well … the same errors are now present in the 2.1 builds. Yet it still builds ISOs and updates.

    
    >>> Overlaying pfPorts /home/pfsense/tools/builder_scripts/../../tools/pfPorts/unbound to /usr/ports/dns/unbound and building...
    >>> gmake(gmake-3.82)...already built on this run.  Skipping.
    >>> libevent(libevent-1.4.14b_2)...already built on this run.  Skipping.
    >>> gmake(gmake-3.82)...already built on this run.  Skipping.
    >>> libtool(libtool-2.4.2)...already built on this run.  Skipping.
    >>> Building ldns(ldns-1.6.12)...Done.
    >>> expat2(expat-2.0.1_2)...already built on this run.  Skipping.
    >>> Building unbound(unbound-1.4.16)...Done.
    >>> Ports with failures:        3
    >>> Building libart_lgpl(libart_lgpl-2.3.21,1)...ERROR!
    >>> Building freetype2(freetype2-2.4.2)...ERROR!
    >>> Building olsrd(olsrd-0.5.6.r7)...ERROR!
    >>> Building athstats...main.c: In function 'getfmt':
    main.c:73: warning: implicit declaration of function 'strcasecmp'
    Done!
    
    

    I'm having same errors.



  • 
    >>> Building libart_lgpl(libart_lgpl-2.3.21,1)...ERROR!
    >>> Building freetype2(freetype2-2.4.2)...ERROR!
    >>> Building olsrd(olsrd-0.5.6.r7)...ERROR!
    >>> Building athstats...main.c: In function 'getfmt':
    main.c:73: warning: implicit declaration of function 'strcasecmp'
    Done!
    
    

    I thought i had checked in a fix for this ^^, these actually would fail now on any build if you have updated your ports. There was a change to pkg-config which causes the first two ports to fail. olsrd is moving to a package, so that should be removed. I will try finish that package in the next few days and have it removed from the build setup. I will get this fixed and report back.



  • Okay. Thanks for your caring.



  • Thanks wagonza. I try to keep my build servers up-to-date. This is why I would like for the build scripts to rebuild ports. Right now, it looks like if the port is already installed, it skips building it. I would like to keep it so that if /tmp/pgPorts_forced_build_required is still there to have it rebuild all the ports in the list with at least the BATCH and FORCE_PKG_REGISTER options set so that the ports and the installed files are updated. Let me know if that is just not realistic.



  • No problem. Do a ./update_git_repos.sh and rebuild it should be working now.
    Ill look at the /tmp/pfPorts_forced_build_required bit and see - it still needs a lot of tuning.



  • Thanks wagonza … I will let you know the outcome.



  • Unfortunately the error issue persists.

    
    >>> Building gogoc(gogoc-1.2)...Done.
    >>> Ports with failures:        4
    >>> Building libart_lgpl(libart_lgpl-2.3.21,1)...ERROR!
    >>> Building freetype2(freetype2-2.4.2)...ERROR!
    >>> Building olsrd(olsrd-0.5.6.r7)...ERROR!
    >>> Building ioncube(ioncube-4.0.12)...ERROR!
    >>> Building athstats...main.c: In function 'getfmt':
    main.c:73: warning: implicit declaration of function 'strcasecmp'
    Done!
    >>> Building tools/crytpo...Done!
    ==> End of pfPorts...
    
    


  • and these are mine.

    
    >>> Building ipfw-classifyd(ipfw-classifyd-0.1)...ERROR!
    >>> File not found ipfw-classifyd				/usr/ports/net/ipfw-classifyd				/usr/local/sbin/ipfw-classifyd - /usr/local/sbin/ipfw-classifyd
    >>> Building mpd5(mpd-5.6)...ERROR!
    >>> File not found mpd5						/usr/ports/net/mpd5							/usr/local/sbin/mpd5 - /usr/local/sbin/mpd5
    >>> Building olsrd(olsrd-0.5.6.r7)...ERROR!
    >>> File not found olsrd						/usr/ports/net/olsrd						/usr/local/sbin/olsrd - /usr/local/sbin/olsrd
    >>> Building php52-pfSense-module(php52-pfSense-module-0.1)...ERROR!
    >>> File not found php52-pfSense-module		/usr/ports/devel/php52-pfSense-module		/usr/local/lib/php/20060613/pfSense.so - /usr/local/lib/php/20060613/pfSense.so
    >>> Building ioncube(ioncube-4.0.12)...ERROR!
    >>> File not found ioncube 					/usr/ports/devel/ioncube					/usr/local/lib/php/20060613/ioncube/ioncube_loader.so - /usr/local/lib/php/20060613/ioncube/ioncube_loader.so
    
    


  • Did you update your ports tree prior to all of this?



  • Yes … I run a script that does that ...

    
    #!/bin/sh
    
    rm -rf /tmp/*
    portsnap fetch extract
    csup -h cvsup17.freebsd.org /usr/share/examples/cvsup/standard-supfile
    cd /home/pfsense/tools/builder_scripts
    ./clean_build.sh
    ./update_git_repos.sh
    rm -rf /home/pfsense/installer
    /cvsup_bsdinstaller ; ./rebuild_bsdinstaller.sh
    ./set_version.sh RELENG_2_1 cvsup17.freebsd.org email email
    cd /home/pfsense/tools/pfPorts/php5; make -DBATCH -DFORCE_PKG_REGISTER -DNOPORTDOCS clean all install clean
    cd /home/pfsense/tools/pfPorts/php5-pfSense-module/; make -DBATCH -DFORCE_PKG_REGISTER -DNOPORTDOCS all install clean
    cd /usr/ports/devel/readline/; make -DBATCH -DFORCE_PKG_REGISTER -DNOPORTDOCS all install clean
    cd /usr/ports/curl; make -DBATCH -DFORCE_PKG_REGISTER -DNOPORTDOCS all install clean
    cd /home/pfsense/tools/builder_scripts
    ./build_iso.sh
    ./build_updates.sh
    
    


  • I do the same basic thing for 2.0.1 builds as well.



  • Down to 2 errors on the 2.0.1 builds. I will probably try the 2.1 builds tonight.

    >>> Ports with failures:        2
    >>> Building olsrd(olsrd-0.5.6.r7)...ERROR!
    >>> Building ioncube(ioncube-4.0.12)...ERROR!
    >>> Building athstats...main.c: In function 'getfmt':
    main.c:73: warning: implicit declaration of function 'strcasecmp'
    Done!
    >>> Building tools/crytpo...Done!
    ==> End of pfPorts...
    

    It still skips when it should not.



  • I meant 'portsnap fetch update' for the ports tree.

    Those two errors are expected. OLSRD will be moved and dont worry about ioncube.



  • I will try that out on some 2.1 builds tonight, or is this only for the 2.0 series?



  • That is for both.



  • @wagonza:

    I meant 'portsnap fetch update' for the ports tree.

    Those two errors are expected. OLSRD will be moved and dont worry about ioncube.

    Hi again. Like you said,  these ports are failed. Even so I build an iso image and it works correctly now. But I'm worried about if it crashes.



  • Mine also errors, but continues the build. I have run on them and everything seems just fine.



  • @podilarius:

    Mine also errors, but continues the build. I have run on them and everything seems just fine.

    They still fail at me. What about you?



  • I have not run a build in a few days, and since snapshots are behind (May 2nd is the latest), there is probably a problem.
    Please post the exact error you are getting. This will help the developers fix the error.


  • Rebel Alliance Developer Netgate

    There was no problem with the build process in general. Snapshots were only off because the ova build was grabbing a conflicting port to one that was already on the builders. All fixed up now.

    olsrd is going to be moved out of base and back to a package, so don't worry too much about that (few people, if any, need/use it anyhow), and ioncube isn't necessary yet.



  • Has anyone attempted a build with 9.0 ???
    Wanting to try the Mellanox support with IPoIB

    Thanks


  • Rebel Alliance Developer Netgate

    Yes, there are even patches in there for 9, and it "mostly" works but there were many problems… random freezes, lots of things in the OS that we needed to code around (check redmine, there's a whole tree of 'em), formats of various things changed that need to be adjusted for.

    So it might function, if you're lucky, but don't expect a miracle.

    If it actually worked properly, we'd be using it.



  • @jimp:

    Yes, there are even patches in there for 9, and it "mostly" works but there were many problems… random freezes, lots of things in the OS that we needed to code around (check redmine, there's a whole tree of 'em), formats of various things changed that need to be adjusted for.

    So it might function, if you're lucky, but don't expect a miracle.

    If it actually worked properly, we'd be using it.

    Thanks for the heads up…
    I tried to register on redmine and had no luck.

    I still would be interested on running it buggy or not at least it would generate logs that can be used for patches


Locked