D-Link Cardbus GE Adapter not recognized as re0



  • Dear all, with the 2.1 snapshot of april 8th my D-Link Cardbus GE adapter DGE-660TD is not recognized any more.

    Any suggestions?

    Markus
    :o


  • Rebel Alliance Developer Netgate

    Anything show up in the boot log (dmesg) for it? What about "pciconf -lvb"?



  • …now I took the memstick image of the 2.1 snapshot and booted normally, which means I did not take the save option.
    Formally for the hard disk installation of 2.1 I had to boot in safe mode, because in normal mode the boot did not succeed, maybe because of strange DMA errors with my hard disk.

    But:
    Now with booting from the memstick I already see the old well known error messages "re0: PHY read failed", which caused my machine to crash under 2.0.1 after approx. 2 days...

    So with the installation of the 2.1 snapshot on the hard disk I have definetely the error

    "ad0: FAILURE - READ_DMA status=51 <ready,dsc,error>error=84 <icrc,aborted>LBA=115113216
    ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=115113104
    ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=115113104"

    and maybe the old well known error "re0: PHY read failed"

    I will investigate further....

    Markus
    :'(</icrc,aborted></ready,dsc,error>


Log in to reply