D-Link Cardbus GE Adapter not recognized as re0
-
Dear all, with the 2.1 snapshot of april 8th my D-Link Cardbus GE adapter DGE-660TD is not recognized any more.
Any suggestions?
Markus
:o -
Anything show up in the boot log (dmesg) for it? What about "pciconf -lvb"?
-
…now I took the memstick image of the 2.1 snapshot and booted normally, which means I did not take the save option.
Formally for the hard disk installation of 2.1 I had to boot in safe mode, because in normal mode the boot did not succeed, maybe because of strange DMA errors with my hard disk.But:
Now with booting from the memstick I already see the old well known error messages "re0: PHY read failed", which caused my machine to crash under 2.0.1 after approx. 2 days...So with the installation of the 2.1 snapshot on the hard disk I have definetely the error
"ad0: FAILURE - READ_DMA status=51 <ready,dsc,error>error=84 <icrc,aborted>LBA=115113216
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=115113104
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=115113104"and maybe the old well known error "re0: PHY read failed"
I will investigate further....
Markus
:'(</icrc,aborted></ready,dsc,error>
