After upgrade 1.2.3 to 2.0.1 i have two Openvpn on firewall rules
-
Hello
I have upgrade pfsense from 1.2.3 to 2.0.1, I uninstalled all the packages except openvpn before performing the upgrade, now pfsense displays 2 openvpn tab on the menu of the firewall.
In the first tab i have any rules in the previous installation of openvpn, in the second tab i have only one rule with description "Auto added OpenVPN rule from config upgrade", if I disable this no one can connect to the network behind the firewall, how can I remedy this problem?Thanks
-
That means you must have an interface assigned as "OpenVPN"? Unless you have a reason your OpenVPN must be assigned (generally with 2.x that's only if you need a routing protocol or under very specific policy routing scenarios that aren't typical), you should just unassign the interface.
-
@cmb:
That means you must have an interface assigned as "OpenVPN"? Unless you have a reason your OpenVPN must be assigned (generally with 2.x that's only if you need a routing protocol or under very specific policy routing scenarios that aren't typical), you should just unassign the interface.
Ok, it is right but how to i can to make an backup old openvpn firewall roules and restore on new Openvpn interface rules?
Thanks
;D -
On each rule, edit, change the interface to the other OpenVPN, save.