Potential Build Advice
-
@JoeMcJoe:
Did you end up using a pci or mini pcie riser card to add an additional Ethernet card?
I'm looking at the same build as you with the same intel motherboard and m350 case.What about a new case back plate, or did you cut it out yourself?
I need 3 Ethernet ports.
I didn't need 3 ports, just 2 for my setup. I don't see an option on the mini-box site with this combo to use the PCI riser option. There may be other options using different mboard/enclosures combination on the mini-box site.
Sure you need 3 ports? Maybe if you post your requirements and other details, others might be able to help.
Sorry I can't be of more help.
No problem.
I was looking for a way to use an Intel motherboard instead of a Jetway.
I did see the Jetway 2+3 (via daughter) card option on the mini-box and mitxpc sites, I wasn't sure if they worked ok with the current pfsense build.
http://www.mitxpc.com/proddetail.asp?prod=EKJNC9EM3505L&cat=209 , this does let me select the daughterboard that uses Intel chipsets for a little more.I use 3 ports right now on my pfsense unit which is an Intel Core2 Duo CPU E6850 @ 3.00GHz, but I don't need that much for my needs, I want to build or buy a fanless quiet small Intel Atom unit.
I use 1 port for the LAN and 2 ports connected to 2 DSL modems, bonded with MLPPP. -
If you can make due with dual NICs then use the Intel D2500CCE that is used in this thread.
If you absolutely need 3, likely the DN2800MT Intel Mboard, shield and riser, Intel 2 port Ethernet would work, but at ~$100 additional cost compared the dual lan build in this thread.
There is a DN2800MT build thread.
….As far as fanless, I know it's not supposed to need them but I had heat issues, once I added heatsinks and fan I had absolutely no problems.
-
For those needing 3-port pfSense boxes, is it possible to do the same thing you need it to do if you just use a cheap unmanaged Gigabit switch and do 2 ports on the pfSense box? This TRENDnet 8-Port often drops to $18 on Amazon. This seems like a much cheaper solution if it works for you.
-
For those needing 3-port pfSense boxes, is it possible to do the same thing you need it to do if you just use a cheap unmanaged Gigabit switch and do 2 ports on the pfSense box? This TRENDnet 8-Port often drops to $18 on Amazon. This seems like a much cheaper solution if it works for you.
Edit I just re-read an earlier post this may have been in reference to, updates at the bottom.
Not really, no, but for some people it is really what they want and don't quite realize it.
The general reason for wanting multiple ports in a pfSense router is to have segmented networks, as in separate networks that may pass certain types of traffic between, but not an open broadcast network between them (such as a firewalled off wireless or otherwise public/guest network, or a DMZ, etc.) This type of situation needs to either have separate ports or VLANs (and a switch that supports them, which that switch doesn't) separating the traffic between the networks.
On the other hand, and why I say the second part of my initial sentence, is the other initial thought many have for having multiple ports is to mimic what you might see in a consumer router that has a built in switch, such as 1 WAN port and 4 LAN ports. In pfSense, though, simply bridging ports to make a pseudo switch out of it is very processor intensive and generally not good on throughput, so using a switch, like you ask, is the way you should do that. If you're good with fabrication, you might even be able to get all that in a single box that looks spiffy. I'm not.
(Although, don't necessarily take that as an endorsement for that switch model, I don't know that model well enough to give it my personal stamp of approval. ;) )
Update For the multiple DSL MLPPP idea, that might work, I don't know multi-WAN well enough to say. My above response may be moot for that situation.
-
Is it possible to use a 2 port pfsense box, and then use VLANs with a managed switch to connect to multiple DSL modems, all using MLPPP on the pfsense?
I know an unmanaged switch won't work. -
@JoeMcJoe:
Is it possible to use a 2 port pfsense box, and then use VLANs with a managed switch to connect to multiple DSL modems, all using MLPPP on the pfsense?
I know an unmanaged switch won't work.Being in the hardware forum I'll give you the hardware portion of the answer: yes. To pfSense, as far as it pertains to software functions, VLANs are no different than physical ports.
Now, the other half, getting multiple DSL modems to load balance, that's a question for the Routing and Multi WAN section of the forums: http://forum.pfsense.org/index.php/board,21.0.html You might get better answers from there since more of the guys that know quite possibly hang out there more than here.