[SQUID] comm_old_accept: FD 20: (53) Software caused connection abort
-
Hi,
I get the following error, it happens every few hours (at random) and stops all WAN traffic. One also has trouble accessing the pfsense web interface.
2012/05/08 16:48:00| comm_old_accept: FD 20: (53) Software caused connection abort
2012/05/08 16:48:00| httpAccept: FD 20: accept failure: (53) Software caused connection abortThus, the only answer is to power off and on again. This is very annoying.
Anyone has a solution for me?
I'm running 2.01 with squid3 and multi-WAN loadbalanced. It did the same with squid2.7 so I hoped upgrading would help. But, no it didn't - still get same error.
MrsPotter
-
MrsPotter,
I'm not getting this error on any of my 05 squid caches.
I found this thread at freebsd forum, may help on understanding the problem.
http://forums.freebsd.org/showthread.php?t=4369As you cannot access web interface, maybe you are reaching MBUF or State table size limit.
You can check both on dashboard.
att,
Marcello Coutinho -
Hi,
Still can't find the cause - so when I get an open slot, I'll just try re-installing the whole system from scratch and see if it stops.
This system only serves 40 users or so, and I never get anywhere near the size limit of MBUF or state table.
I run it on a P4 3GHz with 2GB RAM, 40GB HDD and very seldomly the CPU goes above 10% and memory never above 40%. So I don't think it is a performance issue either.
Might it be a faulty RAM module?
Cheers,
MrsPotter
