PFSENSE WITH SIPROXD AND TRIXBOX
-
I have a pfense firewall running and i have a trixbox runing also.. I can make out going calls but cant make incoming. I have searched and searched on the web on how to with no luck.
I cannot make incoming calls. I have fwded port 5060-5061 to the trixbox and ports 10000 to 20000 to the trixbox.
IT HAS WORKED A FEW TIMES BUT THE RAMOMLY DONT WORK ANYMORE
NETWORK IS A FOLLOWS
INCOMING CONNECTION TO PFSENSE WAN NIC 75.XX.XX.XX
LAN NIC 192.168.0.1/24 TO SWITCH
TRIXBOX IS 192.168.0.8/24
ANY GOOD GUIDES FOR SIPROXD
OH YEA I USE VIETILITY FOR THE TRUNKS WITH 2 DIDS.
THANKS
-
I use a lot of PBX in a flash distros and what I have found is if you can setup a rule in NAT for 10000 - 20000 UDP inbound to the IP of your Trixbox and don't setup an inbound NAT rule for for 5060. Uninstall SIP Prox and restart your pfsense, make sure your trixbox rtp.conf file is setup to use only ports 10000 - 20000.
I have four sites working like this each with pfSense 2.01 three different VoIP providers and no issues.
I would also setup a NAT outbound rule for your Trixbox to use a static Port as per the below example.
WAN 192.168.0.8/31 * * * * * YES VoIP Server